FreeBSD 12.0-RC3 Now Available

Yuri Pankov yuripv at yuripv.net
Sun Dec 2 15:00:05 UTC 2018


Yagertiny Алексей wrote:
> Hello everyone!
> 
> We have a problem since version 10.3 (bug 209468 [1]). There is no availability to boot system if some of adaptec raid controllers are used. Could you be so kind as to pay attention to it?
> 
> [1]   https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=209468

I have built a -CURRENT disc1.iso with the patch provided in PR.  It
seems to work without issues with older ASR 6805 having 8 disks in
RAID10 (below).

It would be nice if you could try installing this and report if it works
for you on newer adapters that you have; if everything looks OK, I'll
put it out for review, and hopefully commit.

https://people.freebsd.org/~yuripv/FreeBSD-13.0-CURRENT-amd64-20181202-r341364-disc1-aacraid.iso

NOTE: as this is a -current snapshot, please use it for testing only.

aacraid0: <Adaptec RAID Controller> mem
0xdbf00000-0xdbffffff,0xdbebf800-0xdbebffff,0xdbebf400-0xdbebf4ff irq 76
at device 0.0 on pci5
aacraid0: Enable Raw I/O
aacraid0: Enable 64-bit array
aacraid0: using MSI interrupts
aacraid0: New comm. interface type1 enabled
aacraid0: Adaptec 6805, aacraid driver 3.2.10-1
aacraidp0 on aacraid0
aacraidp1 on aacraid0
aacraidp2 on aacraid0
aacraidp3 on aacraid0
da0 at aacraidp0 bus 0 scbus7 target 0 lun 0
da0: <Adaptec Array V1.0> Fixed Direct Access SPC-2 SCSI device
da0: Serial Number A12B55B400
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 1716224MB (3514826752 512 byte sectors)
ses0 at aacraidp3 bus 0 scbus10 target 0 lun 0
ses0: <ADAPTEC Virtual SGPIO > Fixed Enclosure Services SPC-3 SCSI device

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20181202/20a878d3/attachment.sig>


More information about the freebsd-stable mailing list