powerd stopped working after update from 8.4 to 9.2

[John Baldwin]

On Wednesday, June 25, 2014 8:03:58 am Hilko Meyer wrote:
> John Baldwin schrieb:
> >On Tuesday, June 24, 2014 1:36:41 pm Hilko Meyer wrote:
> >> On Tue, 24 Jun 2014 10:26:52 -0400, you wrote:
> >> >On Monday, June 23, 2014 7:12:23 pm Hilko Meyer wrote:
> >> >> John Baldwin wrote:
> >> >> >On Sunday, June 22, 2014 9:27:08 pm Hilko Meyer wrote:
> >> >> >> 
> >> >> >> powerd doesn't work anymore after the update from 8.4 to 9.2. The 
system
> >> >> >> has an old (more than 10 years) mainboard with Via KT133 chipset.
> >> >> >> 
> >> >> >> I made a verbose boot with both, 8.4 and 9.2:
> >> >> >> 8.4: http://pastebin.com/iiZXRXgK
> >> >> >> 9.2: http://pastebin.com/sHcd3MHv
> >> >> >> The relevant part of the diff seem to be these parts:
> >> >> >> 
> >> >> >>  viapropm0: SMBus I/O base at 0x5000
> >> >> >>  viapropm0: SMBus I/O base at 0x5000
> >> >> >>  viapropm0: <VIA VT82C686A Power Management Unit> port 
0x5000-0x500f at
> >> >> >> device 7.4 on pci0
> >> >> >> -viapropm0: SMBus revision code 0x40
> >> >> >> -smbus0: <System Management Bus> on viapropm0
> >> >> >> -smb0: <SMBus generic I/O> on smbus0
> >> >> >> +viapropm0: could not allocate bus space
> >> >> >> +device_attach: viapropm0 attach returned 6
> >> >> >> […]
> >> >> >>  acpi_throttle0: <ACPI CPU Throttling> on cpu0
> >> >> >> -acpi_throttle0: P_CNT from P_BLK 0x4010
> >> >> >> +acpi_throttle0: failed to attach P_CNT
> >> >> >> +device_attach: acpi_throttle0 attach returned 6
> >> >> >> 
> >> >> >> Any ideas what I can do?
> >> >> >
> >> >> >acpi_timer0 also failed to probe due to a resource issue. Can you get 
the 
> >> >> >output of 'devinfo -rv' and 'devinfo -u' from the both kernels?
> >> >> 
> >> >> Yes, no problem.
> >> >> devinfo -rv:
> >> >> 8.4: http://pastebin.com/6xm1tBrU
> >> >> 9.2: http://pastebin.com/whXk32Ab
> >> >> 
> >> >> devinfo -u:
> >> >> 8.4: http://pastebin.com/47U7HZb3
> >> >> 9.2: http://pastebin.com/U85HTw0C
> >> >> 
> >> >> thanks for your help,
> >> >> Hilko
> >> >
> >> >Can you provide your acpidump?  This box seems confusing.
> >> 
> >> Well, its quite old. An Epox 8kta3 from around 2002. I was not sure which 
output
> >> you need so I attached acpidump -d and acpidump -dt.
> >
> >Ok, try this:
> >
> >Index: sys/dev/acpica/acpi.c
> 
> The patch doesn't apply. Was it for head or 9-stable and not for 9.2?

It is for HEAD though it should apply to 9-stable.  It might not apply to 9.2 
as it patches a previous fix that went to 9.2.  For 9.2, please merge the
change to stable/9 from 
http://svnweb.freebsd.org/base?view=revision&revision=263022 first and then 
apply this patch.

-- 
John Baldwin