pci issues with SBC (AMD G-T40E) - PCEngines apu

[Daniel Braniss]

Hi all,
the short story is that not always all the devices are discovered
correctly, i.e. there are 3 RealTek and sometimes all 3 are discovered,
sometimes 2,sometimes only one.
My guts are telling me it’s a timing issue, is there some delay I can put in?
I tried booting verbose but the problem is till there.
example:
…
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7b00000-0xf7b00fff,0xf7a00000-0xf7a03fff irq 17 at device 0.0 on pci2
re1: MSI count : 1
re1: MSI-X count : 4
re1: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 260 to local APIC 0 vector 55
re1: using IRQ 260 for MSI-X
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus1
rgephy1: OUI 0x00e04c, model 0x0011, rev. 4
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-
FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re1: bpf attached
re1: Ethernet address: 00:0d:b9:34:28:c5
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 6.0 on pci0
pcib0: allocated type 4 (0x3000-0x3fff) for rid 1c of pcib3
pcib0: allocated type 3 (0xf7d00000-0xf7dfffff) for rid 20 of pcib3
pcib0: allocated type 3 (0xf7c00000-0xf7cfffff) for rid 24 of pcib3
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0x3000-0x3fff
pcib3:   memory decode     0xf7d00000-0xf7dfffff
pcib3:   prefetched decode 0xf7c00000-0xf7cfffff
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x10ec, dev=0x8168, revid=0x06
        domain=0, bus=3, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=10
        powerspec 3  supports D0 D1 D2 D3  current D0
        MSI supports 1 message, 64 bit
        MSI-X supports 4 messages in map 0x20
        map[10]: type I/O Port, range 32, base 0x3000, size  8, enabled
pcib3: allocated I/O port range (0x3000-0x30ff) for rid 10 of pci0:3:0:0
        map[18]: type Memory, range 64, base 0xf7d00000, size 12, enabled
pcib3: allocated memory range (0xf7d00000-0xf7d00fff) for rid 18 of pci0:3:0:0
        map[20]: type Prefetchable Memory, range 64, base 0xf7c00000, size 14, enabled
pcib3: allocated prefetch range (0xf7c00000-0xf7c03fff) for rid 20 of pci0:3:0:0
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 18
re2: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x3000-0x30ff mem 0xf7d00000-0xf7d00fff,0xf7c00000-0xf7c03fff irq 18 at device 0.0 on pci3
re2: MSI count : 1
re2: MSI-X count : 4
re2: attempting to allocate 1 MSI-X vectors (4 supported)
msi: routing MSI-X IRQ 261 to local APIC 0 vector 56
re2: using IRQ 261 for MSI-X
re2: Using 1 MSI-X message
re2: ASPM disabled
re2: Chip rev. 0x80000000
re2: MAC rev. 0x00000000   <—————————------------ notice this is now zero!
re2: Unknown H/W revision: 0x80000000
device_attach: re2 attach returned 6
…

thanks,
	danny