SAS Drive identification LEDs

[Matt Burke]

On 03/28/12 06:11, Fred Liu wrote:
> Does ARC-1320 card need specific backplane to work with to identify
> HDD's position?

Shouldn't imagine so... I'm using a set of 4x four-bay Chenbro
80H10321513C0 jobbies in a 4U box for a total of 16 disks.

My original post showed me lighting up an identification LED by poking
values at the backplane via the ses device, but the Areca utility seems to
do it by poking the drives themselves - which is a much better solution and
*should* be backplane-agnostic.



-- 
Sorry for the below disclaimer
 
The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. 

Critical Software Ltd. reserves the right to monitor and record e-mail messages sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring its effective operation.

Critical Software Ltd. registered in England, 04909220. Registered Office: IC2, Keele Science Park, Keele, Staffordshire, ST5 5NH.

------------------------------------------------------------
This message has been scanned for security threats by iCritical.
    For further information, please visit www.icritical.com
------------------------------------------------------------