video issue - Intel Atom based motherboard D2500HN
Marek Salwerowicz
marek_sal at wp.pl
Sat Jul 14 15:08:29 UTC 2012
W dniu 2012-07-14 15:36, Schaich Alonso pisze:
> That is probably a broken BIOS, firmware or hardware. Can you try booting a
> different operating system? (USB rescue discs or so)
Yes, I've successfully booted System Rescue CD (based on Gentoo Linux) 2.3.1
Uname, dmesg and lspci are attached.
Right now I am trying to install Debian i386 into USB stick (the
installer works fine)
Regards,
--
Marek
-------------- next part --------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-std231-i586 (root at catalyst) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #2 SMP Tue Aug 23 17:46:59 UTC 2011
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 0000000000090000 (reserved)
[ 0.000000] BIOS-e820: 0000000000090000 - 000000000009e800 (usable)
[ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cee98000 (usable)
[ 0.000000] BIOS-e820: 00000000cee98000 - 00000000ceebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000ceebf000 - 00000000cef0f000 (usable)
[ 0.000000] BIOS-e820: 00000000cef0f000 - 00000000cefbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cefbf000 - 00000000ceff2000 (usable)
[ 0.000000] BIOS-e820: 00000000ceff2000 - 00000000cefff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cefff000 - 00000000cf000000 (usable)
[ 0.000000] BIOS-e820: 00000000cf000000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: /D2500HN, BIOS MUCDT10N.86A.0071.2012.0612.1459 06/12/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0xcf000 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FF0000000 write-back
[ 0.000000] 3 base 0CF000000 mask FFF000000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fbe30] fbe30
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0036c00000 page 2M
[ 0.000000] 0036c00000 - 0036ffe000 page 4k
[ 0.000000] kernel direct mapping tables up to 36ffe000 @ 17f9000-1800000
[ 0.000000] RAMDISK: 7f7a8000 - 7ffff000
[ 0.000000] Allocated new RAMDISK: 367a7000 - 36ffd8c8
[ 0.000000] Move RAMDISK from 000000007f7a8000 - 000000007fffe8c7 to 367a7000 - 36ffd8c7
[ 0.000000] ACPI: RSDP 000f2390 00024 (v02 INTEL )
[ 0.000000] ACPI: XSDT ceffe120 0004C (v01 INTEL TIANO 00000047 01000013)
[ 0.000000] ACPI: FACP ceff6000 000F4 (v03 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: DSDT ceff8000 05B38 (v02 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: FACS cef95000 00040
[ 0.000000] ACPI: SSDT ceff7000 0043E (v01 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: APIC ceff5000 00084 (v02 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: MCFG ceff4000 0003C (v01 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: HPET ceff3000 00038 (v01 INTEL TIANO 00000047 MSFT 0100000D)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2432MB HIGHMEM available.
[ 0.000000] 879MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 36ffe000
[ 0.000000] low ram: 0 - 36ffe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00036ffe
[ 0.000000] HighMem 0x00036ffe -> 0x000cf000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000008f
[ 0.000000] 0: 0x00000090 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000cee98
[ 0.000000] 0: 0x000ceebf -> 0x000cef0f
[ 0.000000] 0: 0x000cefbf -> 0x000ceff2
[ 0.000000] 0: 0x000cefff -> 0x000cf000
[ 0.000000] On node 0 totalpages: 847529
[ 0.000000] free_area_init_node: node 0, pgdat c0c8e280, node_mem_map f4dc6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 219454 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4865 pages used for memmap
[ 0.000000] HighMem zone: 617501 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000008f000 - 0000000000090000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at e4000000 (gap: e4000000:1be00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 12 pages/cpu @f4800000 s28160 r0 d20992 u1048576
[ 0.000000] pcpu-alloc: s28160 r0 d20992 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 840904
[ 0.000000] Kernel command line: scandelay=1 initrd=initram.igz BOOT_IMAGE=rescuecd
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 16957120 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00036ffe:000cf000)
[ 0.000000] Memory: 3321748k/3391488k available (5720k kernel code, 68368k reserved, 3099k data, 6100k init, 2489464k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xff574000 - 0xfffff000 (10796 kB)
[ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB)
[ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB)
[ 0.000000] .init : 0xc0c9e000 - 0xc1293000 (6100 kB)
[ 0.000000] .data : 0xc0996329 - 0xc0c9d140 (3099 kB)
[ 0.000000] .text : 0xc0400000 - 0xc0996329 (5720 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304
[ 0.000000] CPU 0 irqstacks, hard=f3020000 soft=f3022000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 1866.999 MHz processor.
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.99 BogoMIPS (lpj=1866999)
[ 0.000213] pid_max: default: 32768 minimum: 301
[ 0.000541] Security Framework initialized
[ 0.000642] SELinux: Disabled at boot.
[ 0.000856] Mount-cache hash table entries: 512
[ 0.001850] Initializing cgroup subsys ns
[ 0.001950] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[ 0.002128] Initializing cgroup subsys cpuacct
[ 0.002304] Initializing cgroup subsys memory
[ 0.002435] Initializing cgroup subsys devices
[ 0.002530] Initializing cgroup subsys freezer
[ 0.002625] Initializing cgroup subsys net_cls
[ 0.002718] Initializing cgroup subsys blkio
[ 0.002909] CPU: Physical Processor ID: 0
[ 0.003003] CPU: Processor Core ID: 0
[ 0.003113] mce: CPU supports 5 MCE banks
[ 0.003218] CPU0: Thermal monitoring enabled (TM1)
[ 0.003316] using mwait in idle threads.
[ 0.005125] ACPI: Core revision 20110112
[ 0.012196] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.012652] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.022740] CPU0: Intel(R) Atom(TM) CPU D2500 @ 1.86GHz stepping 01
[ 0.123981] Performance Events: PEBS fmt0+, generic architected perfmon, Intel PMU driver.
[ 0.124216] ... version: 3
[ 0.124306] ... bit width: 40
[ 0.124397] ... generic registers: 2
[ 0.124487] ... value mask: 000000ffffffffff
[ 0.124579] ... max period: 000000007fffffff
[ 0.124670] ... fixed-purpose events: 3
[ 0.124760] ... event mask: 0000000700000003
[ 0.125476] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.125871] CPU 1 irqstacks, hard=f30f0000 soft=f30f2000
[ 0.125883] Booting Node 0, Processors #1
[ 0.135967] Initializing CPU#1
[ 0.216035] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.216352] Brought up 2 CPUs
[ 0.216448] Total of 2 processors activated (7467.22 BogoMIPS).
[ 0.216843] sizeof(vma)=88 bytes
[ 0.216848] sizeof(page)=32 bytes
[ 0.216851] sizeof(inode)=360 bytes
[ 0.216854] sizeof(dentry)=128 bytes
[ 0.216857] sizeof(ext3inode)=516 bytes
[ 0.216860] sizeof(ext4inode)=608 bytes
[ 0.216864] sizeof(buffer_head)=56 bytes
[ 0.216867] sizeof(skbuff)=192 bytes
[ 0.216870] sizeof(task_struct)=3212 bytes
[ 0.217360] devtmpfs: initialized
[ 0.220478] atomic64 test passed for i386+ platform with CX8 and with SSE
[ 0.220625] Time: 16:58:53 Date: 07/14/12
[ 0.220925] NET: Registered protocol family 16
[ 0.221447] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.221608] ACPI: bus type pci registered
[ 0.222074] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.222238] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.222335] PCI: Using MMCONFIG for extended config space
[ 0.222429] PCI: Using configuration type 1 for base access
[ 0.226310] bio: create slab <bio-0> at 0
[ 0.228758] ACPI: EC: Look up EC in DSDT
[ 0.230832] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.239903] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.240642] ACPI: Interpreter enabled
[ 0.240741] ACPI: (supports S0 S3 S4 S5)
[ 0.240987] ACPI: Using IOAPIC for interrupt routing
[ 0.256100] ACPI: No dock devices found.
[ 0.256200] HEST: Table not found.
[ 0.256297] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.256935] \_SB_.PCI0:_OSC invalid UUID
[ 0.256939] _OSC request data:1 8 1f
[ 0.256949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.257675] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.257775] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.257885] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.258042] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff]
[ 0.258200] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000effff]
[ 0.260034] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.260193] pci_root PNP0A08:00: host bridge window [mem 0xcf800000-0xcfffffff]
[ 0.260352] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xfebfffff]
[ 0.260511] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.260689] pci 0000:00:00.0: [8086:0bf5] type 0 class 0x000600
[ 0.260748] pci 0000:00:02.0: [8086:0be1] type 0 class 0x000300
[ 0.260765] pci 0000:00:02.0: reg 10: [mem 0xd0100000-0xd01fffff]
[ 0.260774] pci 0000:00:02.0: reg 14: [io 0x20d0-0x20d7]
[ 0.260875] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.260898] pci 0000:00:1b.0: reg 10: [mem 0xd0300000-0xd0303fff 64bit]
[ 0.260972] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.260980] pci 0000:00:1b.0: PME# disabled
[ 0.261011] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.261088] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.261095] pci 0000:00:1c.0: PME# disabled
[ 0.261134] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.261199] pci 0000:00:1d.0: reg 20: [io 0x20a0-0x20bf]
[ 0.261248] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.261314] pci 0000:00:1d.1: reg 20: [io 0x2080-0x209f]
[ 0.261364] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.261428] pci 0000:00:1d.2: reg 20: [io 0x2060-0x207f]
[ 0.261478] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.261542] pci 0000:00:1d.3: reg 20: [io 0x2040-0x205f]
[ 0.261601] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.261629] pci 0000:00:1d.7: reg 10: [mem 0xd0204400-0xd02047ff]
[ 0.261721] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.261728] pci 0000:00:1d.7: PME# disabled
[ 0.261756] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.261841] pci 0000:00:1f.0: [8086:27bc] type 0 class 0x000601
[ 0.261938] pci 0000:00:1f.0: [Firmware Bug]: TigerPoint LPC.BM_STS cleared
[ 0.262081] pci 0000:00:1f.2: [8086:27c1] type 0 class 0x000106
[ 0.262104] pci 0000:00:1f.2: reg 10: [io 0x20c8-0x20cf]
[ 0.262119] pci 0000:00:1f.2: reg 14: [io 0x20dc-0x20df]
[ 0.262132] pci 0000:00:1f.2: reg 18: [io 0x20c0-0x20c7]
[ 0.262145] pci 0000:00:1f.2: reg 1c: [io 0x20d8-0x20db]
[ 0.262158] pci 0000:00:1f.2: reg 20: [io 0x2020-0x202f]
[ 0.262171] pci 0000:00:1f.2: reg 24: [mem 0xd0204000-0xd02043ff]
[ 0.262211] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.262218] pci 0000:00:1f.2: PME# disabled
[ 0.262242] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.262305] pci 0000:00:1f.3: reg 20: [io 0x2000-0x201f]
[ 0.262433] pci 0000:01:00.0: [8086:10d3] type 0 class 0x000200
[ 0.262464] pci 0000:01:00.0: reg 10: [mem 0xd0020000-0xd003ffff]
[ 0.262486] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xd001ffff]
[ 0.262508] pci 0000:01:00.0: reg 18: [io 0x1000-0x101f]
[ 0.262531] pci 0000:01:00.0: reg 1c: [mem 0xd0040000-0xd0043fff]
[ 0.262643] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.262653] pci 0000:01:00.0: PME# disabled
[ 0.262704] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.262802] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.262810] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.262820] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.262913] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.263015] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.263023] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.263034] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.263040] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.263046] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.263052] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.263059] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.263065] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000effff] (subtractive decode)
[ 0.263071] pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.263077] pci 0000:00:1e.0: bridge window [mem 0xcf800000-0xcfffffff] (subtractive decode)
[ 0.263083] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xfebfffff] (subtractive decode)
[ 0.263090] pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.263108] pci_bus 0000:00: on NUMA node 0
[ 0.263115] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263261] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.263531] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.263744] \_SB_.PCI0:_OSC invalid UUID
[ 0.263747] _OSC request data:1 1f 1f
[ 0.263756] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.263956] \_SB_.PCI0:_OSC invalid UUID
[ 0.263959] _OSC request data:1 0 1d
[ 0.270647] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.271265] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.271906] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
[ 0.272445] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.272973] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.273600] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.274240] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *9
[ 0.274782] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.275470] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.275643] vgaarb: loaded
[ 0.276019] SCSI subsystem initialized
[ 0.276250] libata version 3.00 loaded.
[ 0.276375] usbcore: registered new interface driver usbfs
[ 0.276507] usbcore: registered new interface driver hub
[ 0.276663] usbcore: registered new device driver usb
[ 0.276985] PCI: Using ACPI for IRQ routing
[ 0.277082] PCI: pci_cache_line_size set to 64 bytes
[ 0.277165] reserve RAM buffer: 000000000008f000 - 000000000008ffff
[ 0.277171] reserve RAM buffer: 000000000009e800 - 000000000009ffff
[ 0.277176] reserve RAM buffer: 00000000cee98000 - 00000000cfffffff
[ 0.277182] reserve RAM buffer: 00000000cef0f000 - 00000000cfffffff
[ 0.277188] reserve RAM buffer: 00000000ceff2000 - 00000000cfffffff
[ 0.277193] reserve RAM buffer: 00000000cf000000 - 00000000cfffffff
[ 0.277464] NetLabel: Initializing
[ 0.277558] NetLabel: domain hash size = 128
[ 0.277651] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.277766] NetLabel: unlabeled traffic allowed by default
[ 0.277883] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.278083] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.280210] Switching to clocksource hpet
[ 0.280829] Switched to NOHz mode on CPU #0
[ 0.280956] Switched to NOHz mode on CPU #1
[ 0.298057] pnp: PnP ACPI init
[ 0.298195] ACPI: bus type pnp registered
[ 0.298664] pnp 00:00: [bus 00-ff]
[ 0.298670] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.298675] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.298681] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.298686] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.298692] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.298697] pnp 00:00: [mem 0x000e0000-0x000effff window]
[ 0.298703] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.298708] pnp 00:00: [mem 0xcf800000-0xcfffffff window]
[ 0.298714] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.298719] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.298846] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.298887] pnp 00:01: [io 0x0000-0x001f]
[ 0.298892] pnp 00:01: [io 0x0081-0x0091]
[ 0.298897] pnp 00:01: [io 0x0093-0x009f]
[ 0.298902] pnp 00:01: [io 0x00c0-0x00df]
[ 0.298907] pnp 00:01: [dma 4]
[ 0.298971] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.298993] pnp 00:02: [mem 0xff000000-0xffffffff]
[ 0.299056] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.299226] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.299344] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.299450] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.299478] pnp 00:04: [io 0x00f0]
[ 0.299494] pnp 00:04: [irq 13]
[ 0.299561] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.299589] pnp 00:05: [io 0x002e-0x002f]
[ 0.299594] pnp 00:05: [io 0x004e-0x004f]
[ 0.299598] pnp 00:05: [io 0x0061]
[ 0.299603] pnp 00:05: [io 0x0063]
[ 0.299607] pnp 00:05: [io 0x0065]
[ 0.299612] pnp 00:05: [io 0x0067]
[ 0.299616] pnp 00:05: [io 0x0070]
[ 0.299620] pnp 00:05: [io 0x0080]
[ 0.299625] pnp 00:05: [io 0x0092]
[ 0.299629] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.299634] pnp 00:05: [io 0x0680-0x069f]
[ 0.299639] pnp 00:05: [io 0xffff]
[ 0.299643] pnp 00:05: [io 0xffff]
[ 0.299647] pnp 00:05: [io 0xffff]
[ 0.299652] pnp 00:05: [io 0x0400-0x047f]
[ 0.299657] pnp 00:05: [io 0x0500-0x057f]
[ 0.299661] pnp 00:05: [io 0x0600-0x061f]
[ 0.299773] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.299871] system 00:05: [io 0xffff] has been reserved
[ 0.299967] system 00:05: [io 0xffff] has been reserved
[ 0.300063] system 00:05: [io 0xffff] has been reserved
[ 0.300167] system 00:05: [io 0x0400-0x047f] has been reserved
[ 0.300264] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.300376] system 00:05: [io 0x0600-0x061f] has been reserved
[ 0.300474] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300541] pnp 00:06: [io 0x06a0-0x06af]
[ 0.300547] pnp 00:06: [io 0x06b0-0x06ff]
[ 0.300634] system 00:06: [io 0x06a0-0x06af] has been reserved
[ 0.300733] system 00:06: [io 0x06b0-0x06ff] has been reserved
[ 0.300833] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.300856] pnp 00:07: [io 0x0070-0x0077]
[ 0.300867] pnp 00:07: [irq 8]
[ 0.300934] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.301015] pnp 00:08: [io 0x0060]
[ 0.301020] pnp 00:08: [io 0x0064]
[ 0.301030] pnp 00:08: [irq 1]
[ 0.301101] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.301417] pnp 00:09: [io 0x0378-0x037f]
[ 0.301428] pnp 00:09: [irq 7]
[ 0.301574] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.301926] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.301932] pnp 00:0a: IRQ 4 override to edge, high
[ 0.302034] pnp 00:0a: [irq 4]
[ 0.302176] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.302468] pnp 00:0b: [io 0x02f8-0x02ff]
[ 0.302474] pnp 00:0b: IRQ 3 override to edge, high
[ 0.302574] pnp 00:0b: [irq 3]
[ 0.302712] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.302974] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 0.302980] pnp 00:0c: [mem 0x00000000-0x00003fff]
[ 0.302985] pnp 00:0c: [mem 0x00000000-0x00000fff]
[ 0.302990] pnp 00:0c: [mem 0x00000000-0x00000fff]
[ 0.302995] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
[ 0.303001] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 0.303117] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.303216] system 00:0c: [mem 0x00000000-0x00003fff] could not be reserved
[ 0.303332] system 00:0c: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.303431] system 00:0c: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.303532] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.303633] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303930] pnp: PnP ACPI: found 13 devices
[ 0.304026] ACPI: ACPI bus type pnp unregistered
[ 0.343775] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.343943] pci 0000:00:1c.0: PCI bridge to [bus 01-01]
[ 0.344041] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.344142] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.344241] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.344420] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.344516] pci 0000:00:1e.0: bridge window [io disabled]
[ 0.344615] pci 0000:00:1e.0: bridge window [mem disabled]
[ 0.344712] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.344832] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.344932] pci 0000:00:1c.0: setting latency timer to 64
[ 0.344945] pci 0000:00:1e.0: setting latency timer to 64
[ 0.344953] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.344958] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.344964] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.344969] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.344975] pci_bus 0000:00: resource 8 [mem 0x000e0000-0x000effff]
[ 0.344980] pci_bus 0000:00: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.344986] pci_bus 0000:00: resource 10 [mem 0xcf800000-0xcfffffff]
[ 0.344992] pci_bus 0000:00: resource 11 [mem 0xd0000000-0xfebfffff]
[ 0.344997] pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.345003] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.345009] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.345015] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd05fffff 64bit pref]
[ 0.345021] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.345026] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.345032] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.345037] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.345043] pci_bus 0000:02: resource 8 [mem 0x000e0000-0x000effff]
[ 0.345048] pci_bus 0000:02: resource 9 [mem 0x000f0000-0x000fffff]
[ 0.345054] pci_bus 0000:02: resource 10 [mem 0xcf800000-0xcfffffff]
[ 0.345060] pci_bus 0000:02: resource 11 [mem 0xd0000000-0xfebfffff]
[ 0.345065] pci_bus 0000:02: resource 12 [mem 0xfed40000-0xfed44fff]
[ 0.345216] NET: Registered protocol family 2
[ 0.345497] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.345991] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.347002] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.347514] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.347620] TCP reno registered
[ 0.347721] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.347829] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.348482] NET: Registered protocol family 1
[ 0.348822] RPC: Registered udp transport module.
[ 0.348919] RPC: Registered tcp transport module.
[ 0.349012] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.349125] pci 0000:00:02.0: Boot video device
[ 0.361315] PCI: CLS 64 bytes, default 64
[ 1.295357] Trying to unpack rootfs image as initramfs...
[ 3.147484] Freeing initrd memory: 8540k freed
[ 3.155223] apm: BIOS not found.
[ 3.155727] audit: initializing netlink socket (disabled)
[ 3.155835] type=2000 audit(1342285135.037:1): initialized
[ 3.194319] highmem bounce pool size: 64 pages
[ 3.194448] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.199096] VFS: Disk quotas dquot_6.5.2
[ 3.199524] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.199823] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[ 3.201651] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 3.202619] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 3.202718] NTFS driver 2.1.30 [Flags: R/O].
[ 3.203139] fuse init (API version 7.16)
[ 3.203795] JFS: nTxBlock = 8192, nTxLock = 65536
[ 3.207870] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 3.209473] SGI XFS Quota Management subsystem
[ 3.210075] Btrfs loaded
[ 3.210594] aufs 2.1-standalone.tree-38-20110418
[ 3.210692] msgmni has been set to 1642
[ 3.211754] alg: No test for stdrng (krng)
[ 3.211863] NET: Registered protocol family 38
[ 3.212019] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 3.212251] io scheduler noop registered
[ 3.212344] io scheduler deadline registered
[ 3.212511] io scheduler cfq registered (default)
[ 3.212778] pcieport 0000:00:1c.0: setting latency timer to 64
[ 3.212837] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 3.213017] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.213196] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.213291] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 3.214003] intel_idle: MWAIT substates: 0x10
[ 3.214008] intel_idle: does not run on family 6 model 54
[ 3.214242] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 3.219391] ACPI: Power Button [PWRB]
[ 3.219622] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 3.219779] ACPI: Sleep Button [SLPB]
[ 3.219998] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 3.220153] ACPI: Power Button [PWRF]
[ 3.220554] ACPI: acpi_idle registered with cpuidle
[ 3.223407] ERST: Table is not found!
[ 3.223647] isapnp: Scanning for PnP cards...
[ 3.579793] isapnp: No Plug & Play device found
[ 3.580072] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 3.600806] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.621608] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.672837] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.693711] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 3.694541] Non-volatile memory driver v1.3
[ 3.694636] Linux agpgart interface v0.103
[ 3.699691] brd: module loaded
[ 3.701512] loop: AES key scrubbing enabled
[ 3.701605] loop: loaded (max 8 devices)
[ 3.701873] ahci 0000:00:1f.2: version 3.0
[ 3.701924] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.702074] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 3.702128] ahci: SSS flag set, parallel bus scan disabled
[ 3.702255] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 3.702409] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part
[ 3.702566] ahci 0000:00:1f.2: setting latency timer to 64
[ 3.704001] scsi0 : ahci
[ 3.704367] scsi1 : ahci
[ 3.704630] scsi2 : ahci
[ 3.704906] scsi3 : ahci
[ 3.705138] ata1: SATA max UDMA/133 abar m1024 at 0xd0204000 port 0xd0204100 irq 41
[ 3.705294] ata2: SATA max UDMA/133 abar m1024 at 0xd0204000 port 0xd0204180 irq 41
[ 3.705447] ata3: DUMMY
[ 3.705536] ata4: DUMMY
[ 3.705958] Fixed MDIO Bus: probed
[ 3.706198] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.706331] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.706450] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 3.706457] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.706676] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 3.706919] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 3.707025] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.711011] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 3.711040] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0204400
[ 3.720892] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 3.721047] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.721143] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.721297] usb usb1: Product: EHCI Host Controller
[ 3.721390] usb usb1: Manufacturer: Linux 2.6.38-std231-i586 ehci_hcd
[ 3.721484] usb usb1: SerialNumber: 0000:00:1d.7
[ 3.721802] hub 1-0:1.0: USB hub found
[ 3.721917] hub 1-0:1.0: 8 ports detected
[ 3.722184] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.722309] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.722472] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 3.722577] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 3.722584] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.724385] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.724926] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000020a0
[ 3.725088] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.725184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.725336] usb usb2: Product: UHCI Host Controller
[ 3.725429] usb usb2: Manufacturer: Linux 2.6.38-std231-i586 uhci_hcd
[ 3.725523] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.725829] hub 2-0:1.0: USB hub found
[ 3.725947] hub 2-0:1.0: 2 ports detected
[ 3.726181] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 3.726283] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 3.726290] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.726473] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 3.726935] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002080
[ 3.727098] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.727194] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.727345] usb usb3: Product: UHCI Host Controller
[ 3.727437] usb usb3: Manufacturer: Linux 2.6.38-std231-i586 uhci_hcd
[ 3.727530] usb usb3: SerialNumber: 0000:00:1d.1
[ 3.727835] hub 3-0:1.0: USB hub found
[ 3.727951] hub 3-0:1.0: 2 ports detected
[ 3.728188] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.728291] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 3.728297] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.728485] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 3.728932] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002060
[ 3.729092] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.729187] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.729340] usb usb4: Product: UHCI Host Controller
[ 3.729432] usb usb4: Manufacturer: Linux 2.6.38-std231-i586 uhci_hcd
[ 3.729526] usb usb4: SerialNumber: 0000:00:1d.2
[ 3.729840] hub 4-0:1.0: USB hub found
[ 3.729957] hub 4-0:1.0: 2 ports detected
[ 3.730206] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 3.730309] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 3.730315] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.730518] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 3.730933] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002040
[ 3.731094] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.731190] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.731342] usb usb5: Product: UHCI Host Controller
[ 3.731434] usb usb5: Manufacturer: Linux 2.6.38-std231-i586 uhci_hcd
[ 3.731528] usb usb5: SerialNumber: 0000:00:1d.3
[ 3.731840] hub 5-0:1.0: USB hub found
[ 3.731957] hub 5-0:1.0: 2 ports detected
[ 3.732949] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 3.733045] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 3.733922] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.734201] mousedev: PS/2 mouse device common for all mice
[ 3.734748] rtc_cmos 00:07: RTC can wake from S4
[ 3.734986] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.735114] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 3.735451] device-mapper: uevent: version 1.0.3
[ 3.735744] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel at redhat.com
[ 3.736032] cpuidle: using governor ladder
[ 3.736125] cpuidle: using governor menu
[ 3.736658] usbcore: registered new interface driver usbhid
[ 3.736750] usbhid: USB HID core driver
[ 3.736902] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 3.737328] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.737446] TCP cubic registered
[ 3.737536] Initializing XFRM netlink socket
[ 3.737638] NET: Registered protocol family 17
[ 3.737778] Registering the dns_resolver key type
[ 3.737923] Using IPI No-Shortcut mode
[ 3.738255] PM: Hibernation image not present or could not be loaded.
[ 3.738275] registered taskstats version 1
[ 3.738500] IMA: No TPM chip found, activating TPM-bypass!
[ 3.738968] Magic number: 4:198:995
[ 3.739180] rtc_cmos 00:07: setting system clock to 2012-07-14 16:58:56 UTC (1342285136)
[ 3.739421] Initalizing network drop monitor service
[ 3.767319] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 4.009611] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.023593] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.144372] usb 1-5: New USB device found, idVendor=0e8d, idProduct=1806
[ 4.144489] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.144586] usb 1-5: Product: MT1806
[ 4.144678] usb 1-5: Manufacturer: MediaTek Inc
[ 4.144771] usb 1-5: SerialNumber: RL6X974
[ 4.156452] Refined TSC clocksource calibration: 1866.732 MHz.
[ 4.156551] Switching to clocksource tsc
[ 4.249365] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 4.314299] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.314533] Freeing unused kernel memory: 6100k freed
[ 4.319459] Write protecting the kernel text: 5724k
[ 4.319616] Write protecting the kernel read-only data: 2392k
[ 4.365645] usb 1-8: New USB device found, idVendor=0951, idProduct=1607
[ 4.365653] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.365658] usb 1-8: Product: DataTraveler 2.0
[ 4.365663] usb 1-8: Manufacturer: Kingston
[ 4.365667] usb 1-8: SerialNumber: 899801162008011514259EED
[ 5.008107] e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
[ 5.008113] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 5.008171] e1000e 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.008199] e1000e 0000:01:00.0: setting latency timer to 64
[ 5.008479] e1000e 0000:01:00.0: irq 42 for MSI/MSI-X
[ 5.008487] e1000e 0000:01:00.0: irq 43 for MSI/MSI-X
[ 5.008493] e1000e 0000:01:00.0: irq 44 for MSI/MSI-X
[ 5.008701] e1000e 0000:01:00.0: Disabling ASPM L0s
[ 5.022464] Initializing USB Mass Storage driver...
[ 5.025110] scsi4 : usb-storage 1-5:1.0
[ 5.025448] scsi5 : usb-storage 1-8:1.0
[ 5.025747] usbcore: registered new interface driver usb-storage
[ 5.025751] USB Mass Storage support registered.
[ 5.093856] e1000e 0000:01:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:22:4d:7a:bc:a0
[ 5.093864] e1000e 0000:01:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 5.093883] e1000e 0000:01:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
[ 6.025390] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.026376] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW SE-208AB TS00 PQ: 0 ANSI: 0
[ 6.036354] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.036362] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.036663] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.036835] sr 4:0:0:0: Attached scsi generic sg0 type 5
[ 6.037554] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 6.038120] sd 5:0:0:0: [sda] 15769600 512-byte logical blocks: (8.07 GB/7.51 GiB)
[ 6.039436] sd 5:0:0:0: [sda] Write Protect is off
[ 6.039444] sd 5:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.039449] sd 5:0:0:0: [sda] Assuming drive cache: write through
[ 6.043990] sd 5:0:0:0: [sda] Assuming drive cache: write through
[ 6.044767] sda: sda1
[ 6.046612] sd 5:0:0:0: [sda] Assuming drive cache: write through
[ 6.046620] sd 5:0:0:0: [sda] Attached SCSI removable disk
[ 10.511853] md: linear personality registered for level -1
[ 10.517151] md: multipath personality registered for level -4
[ 10.521744] md: raid0 personality registered for level 0
[ 10.529811] md: raid1 personality registered for level 1
[ 10.534176] async_tx: api initialized (async)
[ 10.536959] xor: automatically using best checksumming function: pIII_sse
[ 10.541004] pIII_sse : 5644.000 MB/sec
[ 10.541009] xor: using function: pIII_sse (5644.000 MB/sec)
[ 10.562988] raid6: int32x1 207 MB/s
[ 10.580096] raid6: int32x2 300 MB/s
[ 10.597138] raid6: int32x4 320 MB/s
[ 10.614105] raid6: int32x8 324 MB/s
[ 10.631007] raid6: mmxx1 417 MB/s
[ 10.647922] raid6: mmxx2 769 MB/s
[ 10.665023] raid6: sse1x1 339 MB/s
[ 10.681961] raid6: sse1x2 578 MB/s
[ 10.698918] raid6: sse2x1 671 MB/s
[ 10.715874] raid6: sse2x2 1144 MB/s
[ 10.715878] raid6: using algorithm sse2x2 (1144 MB/s)
[ 10.733768] md: raid6 personality registered for level 6
[ 10.733774] md: raid5 personality registered for level 5
[ 10.733778] md: raid4 personality registered for level 4
[ 10.747591] md: raid10 personality registered for level 10
[ 14.308524] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 14.366332] ISOFS: changing to secondary root
[ 15.041910] UDF-fs: No partition found (1)
[ 15.155939] NTFS volume version 3.1.
[ 15.280188] NTFS volume version 3.1.
[ 15.287497] aufs test_add:262:mount[358]: uid/gid/perm /squashfs 0/0/0755, 0/0/01777
[ 15.290935] aufs test_add:262:mount[363]: uid/gid/perm /boot 0/0/0555, 0/0/01777
[ 31.024331] udev[726]: starting version 164
[ 31.944580] iTCO_vendor_support: vendor-support=0
[ 33.694307] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
[ 33.695403] iTCO_wdt: Found a NM10 TCO device (Version=2, TCOBASE=0x0460)
[ 33.696350] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 33.866193] parport_pc 00:09: reported by Plug and Play ACPI
[ 33.866252] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 34.396987] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 34.400261] ppdev: user-space parallel port driver
[ 45.947339] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 45.947349] e1000e 0000:01:00.0: eth0: 10/100 speed: disabling TSO
[ 49.019297] NET: Registered protocol family 10
[ 49.049640] sshd (1196): /proc/1196/oom_adj is deprecated, please use /proc/1196/oom_score_adj instead.
[ 51.985548] md: Autodetecting RAID arrays.
[ 51.985554] md: Scanned 0 and added 0 devices.
[ 51.985558] md: autorun ...
[ 51.985561] md: ... autorun DONE.
[ 59.982188] eth0: no IPv6 routers present
-------------- next part --------------
00:00.0 Host bridge: Intel Corporation Cedarview DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Cedarview Integrated Graphics Controller (rev 09)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 02)
00:1d.0 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation NM10 Family LPC Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation N10/ICH7 Family SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 02)
01:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
-------------- next part --------------
Linux sysresccd 2.6.38-std231-i586 #2 SMP Tue Aug 23 17:46:59 UTC 2011 i686 Intel(R) Atom(TM) CPU D2500 @ 1.86GHz GenuineIntel GNU/Linux
More information about the freebsd-stable
mailing list