V8.x-PRE2 Serious PUC problem - Heads Up!

[Mike Tancsa]

At 09:27 AM 11/19/2009, Karl Denninger wrote:
>It's not.
>
>What does that do?


 From the man page,

      With flags encoded as:
      0x00010   device is potential system console
      0x00080   use this port for remote kernel debugging
      0x00100   set RX FIFO trigger level to ``low'' (NS8250 only)
      0x00200   set RX FIFO trigger level to ``medium low'' (NS8250 only)
      0x00400   set RX FIFO trigger level to ``medium high'' (default, NS8250
                only)
      0x00800   set RX FIFO trigger level to ``high'' (NS8250 only)


You might still want to try adjusting how fast the FIFOs are flushed 
to see if thats your issue.

         ---Mike


--------------------------------------------------------------------
Mike Tancsa,                                      tel +1 519 651 3400
Sentex Communications,                            mike at sentex.net
Providing Internet since 1994                    www.sentex.net
Cambridge, Ontario Canada                         www.sentex.net/mike