Error message: run_interrupt_driven_hooks:...

Joe A. fj at panix.com
Tue May 12 02:02:57 UTC 2009


Greetings...

Basic data on my experience with the xpt_config hang; I have more
detail if needed, but I doubt anyone will believe it. I'm not even
sure I do.

Some other reports:

http://lists.freebsd.org/pipermail/freebsd-questions/2009-April/196116.html
Seur Bors Thu Apr 9 14:43:34 UTC 2009.

http://lists.freebsd.org/pipermail/freebsd-stable/2009-May/049901.html
martinko gamato Mon May 11 22:05:56 UTC 2009

http://www.nabble.com/Freebsd-7.2-RC-boot-problem-tt23257632.html#a23257632

http://forums.pcbsd.org/viewtopic.php?f=1&t=13312

Here is the entire error for me during boot:

run_interrupt_driven_hooks: still waiting after BIGNUM seconds for xpt_config

It hangs after this point in the boot process:

pcm0: <HDA Codec: Realtek ALC885>
pcm0: <HDA Driver Revision: 20080420_0052>

the boot process does not continue, so the next normal thing does not
appear on the console:

SMP: AP CPU #1 Launched!

but during the hang, this scrolls past (punctuated by the BIGNUM
seconds wait) over and over on the console:

acpi_tz0: _TMP value is absurd, ignored (-269.4C)

Normally, that message is suppressed by this /etc/sysctl.conf entry:

hw.acpi.thermal.polling_rate=0

I suppose this means that /etc/sysctl.conf is not parsed and the
second CPU is not launched.

Hardware in question, as seen by dmesg, is attached; the vendor's
specs are:

Core 2 Duo (C) E6400 2.13 GHz 1066 MHz front side bus Socket 775
Chipset P965
Motherboard: Asus P5BW-LA
HP/Compaq motherboard name: Basswood-UL8E

There is RAID on the motherboard; I don't use it. I do use AHCI. BIOS
is current; there are no available updates. The onboard firewire is
disabled, since it began (prior to 7.1) causing unresolvable panics.

CAM is in my kernel:

# SCSI peripherals
#Added atapicam; apparently, cdparanoia requires it.
device          atapicam
device          scbus           # SCSI bus (required for SCSI)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)

As of 9:30 PM EDT May 11, the issue has de-Heisenberged from my PC.

I'm not subscribed to the list; so you'll need to Cc: me if you think
I can help.
-------------- next part --------------
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE-p5 #0: Sun May  3 06:43:50 EDT 2009
    root at whisperer.chthonixia.net:/usr/obj/usr/src/sys/WHISPERER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (2135.55-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 2146299904 (2046 MB)
avail memory = 2094936064 (1997 MB)
ACPI APIC Table: <HP-CPC ASUSACPI>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <HP-CPC ASUSACPI> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7fde0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xde00-0xdeff mem 0xe0000000-0xefffffff,0xfddf0000-0xfddfffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> mem 0xfdde0000-0xfddeffff at device 0.1 on pci1
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0xff00-0xff1f irq 21 at device 26.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0xfe00-0xfe1f irq 18 at device 26.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> mem 0xfdfff000-0xfdfff3ff irq 21 at device 26.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801H (ICH8) USB 2.0 controller USB2-B> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfdff4000-0xfdff7fff irq 22 at device 27.0 on pci0
pcm0: [ITHREAD]
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0xfd00-0xfd1f irq 23 at device 29.0 on pci0
uhci2: [GIANT-LOCKED]
uhci2: [ITHREAD]
usb3: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0xfc00-0xfc1f irq 17 at device 29.1 on pci0
uhci3: [GIANT-LOCKED]
uhci3: [ITHREAD]
usb4: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0xfb00-0xfb1f irq 18 at device 29.2 on pci0
uhci4: [GIANT-LOCKED]
uhci4: [ITHREAD]
usb5: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb5: USB revision 1.0
uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
uhub5: 2 ports with 2 removable, self powered
ehci1: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> mem 0xfdffe000-0xfdffe3ff irq 23 at device 29.7 on pci0
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
usb6: EHCI version 1.0
usb6: companion controllers, 2 ports each: usb3 usb4 usb5
usb6: <Intel 82801H (ICH8) USB 2.0 controller USB2-A> on ehci1
usb6: USB revision 2.0
uhub6: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb6
uhub6: 6 ports with 6 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5212> mem 0xfdee0000-0xfdeeffff irq 17 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:14:6c:89:30:1c
ath0: mac 7.9 phy 4.5 radio 5.6
fwohci0: <VIA Fire II (VT6306)> port 0xcf00-0xcf7f mem 0xfdeff000-0xfdeff7ff irq 16 at device 4.0 on pci2
fwohci0: [FILTER]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:11:06:66:00:00:03:12
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x1264000
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel AHCI controller> port 0xfa00-0xfa07,0xf900-0xf903,0xf800-0xf807,0xf700-0xf703,0xf600-0xf61f mem 0xfdffd000-0xfdffd7ff irq 19 at device 31.2 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 6 ports detected
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ata6: <ATA channel 4> on atapci0
ata6: [ITHREAD]
ata7: <ATA channel 5> on atapci0
ata7: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 823082306000823
device_attach: est1 attach returned 6
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: acpi_hpet0 attach returned 12
orm0: <ISA Option ROM> at iomem 0xd0000-0xd1fff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata0: [ITHREAD]
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
ata1: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ums0: <Razer Razer Diamondback Optical Mouse, class 0/0, rev 2.00/1.00, addr 2> on uhub3
ums0: 7 buttons and Z dir.
ukbd0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 3> on uhub3
kbd2 at ukbd0
uhid0: <vendor 0x1241 USB Keyboard, class 0/0, rev 1.10/2.80, addr 3> on uhub3
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acpi_tz0: _TMP value is absurd, ignored (-268.9C)
acpi_tz0: _TMP value is absurd, ignored (-268.9C)
acpi_tz0: _TMP value is absurd, ignored (-268.9C)
acpi_tz0: _TMP value is absurd, ignored (-268.9C)
acpi_tz0: _TMP value is absurd, ignored (-268.9C)
ad4: 238475MB <WDC WD2500JS-60NCB1 10.02E02> at ata2-master SATA300
ad10: 305245MB <Seagate ST3320620AS 3.AAE> at ata5-master SATA150
acd0: DVDR <HL-DT-STDVDRRW GSA-H30L/S544> at ata6-master SATA150
pcm0: <HDA Codec: Realtek ALC885>
pcm0: <HDA Driver Revision: 20080420_0052>
SMP: AP CPU #1 Launched!
acpi_tz0: _TMP value is absurd, ignored (-269.4C)
cd0 at ata6 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRRW GSA-H30L S544> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
ath0: link state changed to UP
acpi_tz0: _TMP value is absurd, ignored (-269.5C)
ath0: device timeout
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: link state changed to DOWN
ath0: link state changed to UP


More information about the freebsd-stable mailing list