no USB mice detected on GA-MA74GM-S2
Piotr Smyrak
piotr.smyrak at heron.pl
Wed Apr 8 19:26:37 UTC 2009
Hi,
I recently upgraded my system to newer hardware with motherboard
GIGABYTE GA-MA74GM-S2 Rev 1.0 with AMD 740G chipset (north bridge)
and AMD SB700 (south) where USB support is located. Everything
would be fine except there is no USB mice detection by FreeBSD at
all. And I am stuck with USB mise since the mobo has no PS/2 port.
First I started with my old build of 6.2, then upgraded to 6.4
STABLE, to finally upgrade to 7.2 PRERELEASE in hope of fixing the
issue. None of versions gave me USB mouse support. I have tried
connecting 3 various mice. No luck. The only effect I can achieve
after connecting a mouse, is a somewhat delayed message on console:
"uhub0: device problem (TIMEOUT), disabling port 2"
The same mice worked great before changing mobo, and still continue
be detected and operational on my laptop (tp x23) running 6.0. I was
also able to use a mouse with no problem within Ubuntu LiveCD.
I have "device ums" compiled into the kernel. As well as devices uhci,
ohci and ehci, ugen and usb, too. usbdevs gives no info on any mouse.
Attaching a verbose dmesg from my currently installed 7.2 build.
Any help is appreciated.
-- dmesg output below --
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-PRERELEASE #4: Sat Apr 4 20:24:14 CEST 2009
root at dsk:/usr/obj/usr/src/sys/SMYRU
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08b6000.
Preloaded elf module "/boot/kernel/if_dc.ko" at 0xc08b6188.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08b6234.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08b62e0.
Calibrating clock(s) ... i8254 clock: 1193215 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2505346537 Hz
CPU: AMD Athlon(tm) Dual Core Processor 4850e (2505.35-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x60fb2 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
TSC: P-state invariant
Cores per package: 2
Data TLB: 32 entries, fully associative
Instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 2079195136 (1982 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x0000000079baffff, 2029563904 bytes (495499 pages)
avail memory = 2029035520 (1935 MB)
Table 'FACP' at 0x7bee3040
Table 'SSDT' at 0x7bee73c0
Table 'HPET' at 0x7bee7680
Table 'MCFG' at 0x7bee76c0
Table 'APIC' at 0x7bee7300
MADT: Found table at 0x7bee7300
MP Configuration Table version 1.4 found at 0xc00f0f00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
SMP: Added CPU 1 (AP)
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
ACPI APIC Table: <GBT GBTUACPI>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
bios32: Found BIOS32 Service Directory header at 0xc00fb100
bios32: Entry = 0xfb7c0 (c00fb7c0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb810
pnpbios: Found PnP BIOS data at 0xc00fc360
pnpbios: Entry = f0000:c390 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
APIC: CPU 1 has ACPI ID 1
ULE: setup cpu group 0
ULE: setup cpu 0
ULE: adding cpu 0 to group 0: cpus 1 mask 0x1
ULE: setup cpu group 1
ULE: setup cpu 1
ULE: adding cpu 1 to group 1: cpus 1 mask 0x2
ACPI: RSDP @ 0x0xf7200/0x0014 (v 0 GBT )
ACPI: RSDT @ 0x0x7bee3000/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: FACP @ 0x0x7bee3040/0x0074 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: DSDT @ 0x0x7bee30c0/0x4222 (v 1 GBT GBTUACPI 0x00001000 MSFT 0x0100000C)
ACPI: FACS @ 0x0x7bee0000/0x0040
ACPI: SSDT @ 0x0x7bee73c0/0x028A (v 1 PTLTD POWERNOW 0x00000001 LTP 0x00000001)
ACPI: HPET @ 0x0x7bee7680/0x0038 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x00000098)
ACPI: MCFG @ 0x0x7bee76c0/0x003C (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
ACPI: APIC @ 0x0x7bee7300/0x0084 (v 1 GBT GBTUACPI 0x42302E31 GBTU 0x01010101)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
lapic1: Routing NMI -> LINT1
lapic1: LINT1 trigger: edge
lapic1: LINT1 polarity: high
MADT: Ignoring local NMI routed to ACPI CPU 2
MADT: Ignoring local NMI routed to ACPI CPU 3
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
kbd: new array size 4
kbd1 at kbdmux0
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 03 b8 01 00 c0 01 00 00 00 44 00
00 01 00 01 37 0a ef 00 00 c0 81 00 00 c0 88 4c
00 c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 51 mode(s) found
VESA: v3.0, 16384k memory, flags:0x1, mode table:0xc078c524 (1000044)
VESA: ATI ATOMBIOS
VESA: (C) 1988-2005, ATI Technologies Inc. RS740 01.00
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
io: <I/O>
npx0: INT 16 interface
acpi0: <GBT GBTUACPI> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xc4b7c000 pa 0x1000
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000a340
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=79111002)
pcibios: BIOS version 3.00
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SATA.SACS -> bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.BAR1 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \\_SB_.PCI0.SMB0.HETT -> bus 0 dev 20 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7bde0000 (3) failed
ACPI timer: 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 3 4 5 6 7 10 11
Validation 0 255 N 0 3 4 5 6 7 10 11
After Disable 0 255 N 0 3 4 5 6 7 10 11
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
acpi_hpet0: vend: 0x4353 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x7911, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7912, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7916, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x4390, revid=0x00
domain=0, bus=0, slot=17, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
MSI supports 4 messages, 64 bit
map[10]: type I/O Port, range 32, base 0xff00, size 3, enabled
map[14]: type I/O Port, range 32, base 0xfe00, size 2, enabled
map[18]: type I/O Port, range 32, base 0xfd00, size 3, enabled
map[1c]: type I/O Port, range 32, base 0xfc00, size 2, enabled
map[20]: type I/O Port, range 32, base 0xfb00, size 4, enabled
map[24]: type Memory, range 32, base 0xfe02f000, size 10, enabled
pcib0: matched entry for 0.17.INTA
pcib0: slot 17 INTA hardwired to IRQ 22
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=18, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[10]: type Memory, range 32, base 0xfe02e000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=18, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
map[10]: type Memory, range 32, base 0xfe02d000, size 12, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=18, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x02b0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe02c000, size 8, enabled
pcib0: matched entry for 0.18.INTB
pcib0: slot 18 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4397, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe02b000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4398, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[10]: type Memory, range 32, base 0xfe02a000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 18
found-> vendor=0x1002, dev=0x4396, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x02b0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe029000, size 8, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4385, revid=0x3a
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0403, statreg=0x9230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x439c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
MSI supports 2 messages
map[20]: type I/O Port, range 32, base 0xfa00, size 4, enabled
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xfe024000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x439d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4399, revid=0x00
domain=0, bus=0, slot=20, func=5
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[10]: type Memory, range 32, base 0xfe028000, size 12, enabled
pcib0: matched entry for 0.20.INTC
pcib0: slot 20 INTC hardwired to IRQ 18
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xefff
pcib1: memory decode 0xfde00000-0xfdffffff
pcib1: prefetched decode 0xf8000000-0xfbffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x796e, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xf8000000, size 26, enabled
pcib1: requested memory range 0xf8000000-0xfbffffff: good
map[18]: type Memory, range 64, base 0xfdff0000, size 16, enabled
pcib1: requested memory range 0xfdff0000-0xfdffffff: good
map[20]: type I/O Port, range 32, base 0xee00, size 8, enabled
pcib1: requested I/O range 0xee00-0xeeff: in range
map[24]: type Memory, range 32, base 0xfde00000, size 20, enabled
pcib1: requested memory range 0xfde00000-0xfdefffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem 0xf8000000-0xfbffffff,0xfdff0000-0xfdffffff,0xfde00000-0xfdefffff irq 18 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfdd00000-0xfddfffff
pcib2: prefetched decode 0xfda00000-0xfdafffff
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found-> vendor=0x10ec, dev=0x8168, revid=0x02
domain=0, bus=2, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=1 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 2 messages, 64 bit
MSI-X supports 2 messages in map 0x20
map[10]: type I/O Port, range 32, base 0xde00, size 8, enabled
pcib2: requested I/O range 0xde00-0xdeff: in range
map[18]: type Prefetchable Memory, range 64, base 0xfdaff000, size 12, enabled
pcib2: requested memory range 0xfdaff000-0xfdafffff: good
map[20]: type Prefetchable Memory, range 64, base 0xfdae0000, size 16, enabled
pcib2: requested memory range 0xfdae0000-0xfdaeffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 18
pci2: <network, ethernet> at device 0.0 (no driver attached)
atapci0: <ATI IXP700 SATA300 controller> port 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f mem 0xfe02f000-0xfe02f3ff irq 22 at device 17.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfb00
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfe02f000
ioapic0: routing intpin 22 (PCI IRQ 22) to vector 49
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports detected
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: ahci_reset devices=0x0
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: SATA connect status=00000000
ata4: ahci_reset devices=0x0
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: SATA connect status=00000000
ata5: ahci_reset devices=0x0
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16 at device 18.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02e000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 16 at device 18.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02d000
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 3 ports with 3 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe02c000-0xfe02c0ff irq 17 at device 18.2 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe02c000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 51
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb2: EHCI version 1.0
usb2: companion controllers, 3 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 6 ports with 6 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 18 at device 19.0 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02b000
ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: SMM does not respond, resetting
usb3: <OHCI (generic) USB controller> on ohci2
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 3 ports with 3 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18 at device 19.1 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe02a000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: SMM does not respond, resetting
usb4: <OHCI (generic) USB controller> on ohci3
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 3 ports with 3 removable, self powered
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq 19 at device 19.2 on pci0
ehci1: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe029000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
ehci1: [GIANT-LOCKED]
ehci1: [ITHREAD]
ehci1: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 3 ports each: usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci1
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 6 ports with 6 removable, self powered
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP700 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfa00-0xfa0f at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfa00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=7f ostat1=50
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=ff stat1=00 devices=0x8<ATAPI_SLAVE>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 54
ata0: [MPSAFE]
ata0: [ITHREAD]
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0xc000-0xcfff
pcib3: memory decode 0xfdc00000-0xfdcfffff
pcib3: prefetched decode 0xfdb00000-0xfdbfffff
pcib3: Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found-> vendor=0x1317, dev=0x0985, revid=0x11
domain=0, bus=3, slot=6, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=1 (dwords)
lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type I/O Port, range 32, base 0xce00, size 8, enabled
pcib3: requested I/O range 0xce00-0xceff: in range
map[14]: type Memory, range 32, base 0xfdcff000, size 10, enabled
pcib3: requested memory range 0xfdcff000-0xfdcff3ff: good
pcib3: matched entry for 3.6.INTA
pcib3: slot 6 INTA hardwired to IRQ 20
dc0: <ADMtek AN985 10/100BaseTX> port 0xce00-0xceff mem 0xfdcff000-0xfdcff3ff irq 20 at device 6.0 on pci3
dc0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xce00
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy0: OUI 0x000749, model 0x0001, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
dc0: bpf attached
dc0: Ethernet address: 00:00:e8:12:73:a7
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 55
dc0: [MPSAFE]
dc0: [ITHREAD]
ohci4: <OHCI (generic) USB controller> mem 0xfe028000-0xfe028fff irq 18 at device 20.5 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe028000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb6: OHCI version 1.0, legacy support
usb6: SMM does not respond, resetting
usb6: <OHCI (generic) USB controller> on ohci4
usb6: USB revision 1.0
uhub6: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
uhub6: 2 ports with 2 removable, self powered
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 56
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
ata: ata0 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcd7ff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
ata1 failed to probe at port 0x170 irq 15 on isa0
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
ioapic0: routing intpin 7 (ISA IRQ 7) to vector 57
ppbus0: [MPSAFE]
ppbus0: [ITHREAD]
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 130270 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100213866 hz
Timecounter "TSC" frequency 2505346537 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-slave: pio=PIO4 wdma=WDMA2 udma=UDMA40 cable=40 wire
acd0: setting PIO4 on IXP700 chip
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: setting UDMA33 on IXP700 chip
acd0: <LITE-ON COMBO SOHC-5232K/NK06> CDRW drive at ata0 as slave
acd0: read 4134KB/s (8958KB/s) write 8958KB/s (8958KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 305244MB <WDC WD3200AVJS-63WDA0 12.01B02> at ata2-master SATA300
ad4: 625140335 sectors [620178C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:1:0): error 22
(probe0:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:1:0): Down reving Protocol Version from 2 to 0?
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata0:0:1:0): error 22
(probe0:ata0:0:1:0): Unretryable Error
pass0 at ata0 bus 0 target 1 lun 0
pass0: <LITE-ON COMBO SOHC-5232K NK06> Removable CD-ROM SCSI-0 device
pass0: 33.000MB/s transfers
GEOM: new disk cd0
cd0 at ata0 bus 0 target 1 lun 0
cd0: <LITE-ON COMBO SOHC-5232K NK06> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [294606 x 2048 byte records]
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 7 to local APIC 1
ioapic0: Assigning ISA IRQ 9 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 18 to local APIC 0
ioapic0: Assigning PCI IRQ 19 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 0
ioapic0: Assigning PCI IRQ 22 to local APIC 1
scsi_cd.c::ioctl cmd=4400648b error=25
Trying to mount root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
More information about the freebsd-stable
mailing list