Problem with FreeBSD installation

Vasilyev Igor vasilyev_igor at
Thu Jan 31 07:12:54 PST 2008

I have machine with FreeBSD 4.11.
I want to upgrade system and install FreeBSD 6.3, but I have some problem.
System boot from CDROM system stoped on screen with selection choise of booting (default, single user mode and other).
System dont't write any error message...
Can somebody help me?

CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3194.56-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
  Hyperthreading: 2 logical CPUs
real memory  = 1072562176 (1047424K bytes)
avail memory = 1041047552 (1016648K bytes)
Changing APIC ID for IO APIC #0 from 0 to 2 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
Programming 24 pins in IOAPIC #1
FreeBSD/SMP: Multiprocessor motherboard: 2 CPUs
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
 io1 (APIC): apic id:  3, version: 0x00178020, at 0xfec10000
Preloaded elf kernel "kernel" at 0xc02d7000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00fde60
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
IOAPIC #0 intpin 18 -> irq 2
IOAPIC #0 intpin 17 -> irq 5
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xc000-0xc01f mem 0xfa100000-0xfa11ffff irq 2 at device 1.0 on pci1
em0:  Speed:N/A  Duplex:N/A
pcib2: <PCI to PCI bridge (vendor=8086 device=25ae)> at device 28.0 on pci0
IOAPIC #1 intpin 3 -> irq 7
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11ab, dev=0x5041) at 4.0 irq 7
pcib3: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
IOAPIC #0 intpin 19 -> irq 10
pci3: <PCI bus> on pcib3
pci3: <ATI Mach64-GR graphics accelerator> at 9.0 irq 5
em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port 0xd100-0xd13f mem 0xf9000000-0xf901ffff irq 10 at device 10.0 on pci3
em1:  Speed:N/A  Duplex:N/A
isab0: <PCI to ISA bridge (vendor=8086 device=25a1)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 2 at device 31.2 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x25a4) at 31.3 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging limited to 10 packets/entry by default
DUMMYNET initialized (011031)
SMP: AP CPU #1 Launched!
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: 114473MB <ST3120827AS> [232581/16/63] at ata0-master UDMA33
ata1-master: DMA limited to UDMA33, non-ATA66 cable or device
acd0: CDROM <CD-224E> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a

Vasilyev Igor <vasilyev_igor at>

More information about the freebsd-stable mailing list