any hope for nfe/msk?

Oleg Lomaka oleg.lomaka at gmail.com
Thu Nov 1 02:00:12 PDT 2007


Hello,

Pyun YongHyeon wrote:
> On Tue, Oct 30, 2007 at 04:01:04PM +0200, Oleg Lomaka wrote:
>
> [...]
>
>  > I had RxFIFO overrun again :(
>  > from dmest:
>  > msk0: Rx FIFO overrun!
>
> [...]
>
> Please try attached patch again. Sorry for the trouble.
> After applying the patch show me verbosed dmesg output related with
> msk(4)/PHY driver.
>
> Thanks for testing.
>   
pcib1: <MPTable PCI-PCI bridge> irq 16 at device 28.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x2000-0x2fff
pcib1:   memory decode     0xd0100000-0xd01fffff
pcib1:   no prefetched decode
pci2: <PCI bus> on pcib1
pci2: domain=0, physical bus=2
found-> vendor=0x11ab, dev=0x4352, revid=0x14
        domain=0, bus=2, slot=0, func=0
        class=02-00-00, hdrtype=0x00, mfdev=0
        cmdreg=0x0007, statreg=0x4010, cachelnsz=16 (dwords)
        lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
        intpin=a, irq=11
        powerspec 2  supports D0 D1 D2 D3  current D0
        MSI supports 2 messages, 64 bit
        map[10]: type Memory, range 64, base 0xd0100000, size 14, enabled
pcib1: requested memory range 0xd0100000-0xd0103fff: good
        map[18]: type I/O Port, range 32, base 0x2000, size  8, enabled
pcib1: requested I/O range 0x2000-0x20ff: in range
pcib1: slot 0 INTA routed to irq 16
mskc0: <Marvell Yukon 88E8038 Gigabit Ethernet> port 0x2000-0x20ff mem 
0xd0100000-0xd0103fff irq 16 at device 0.0 on pci2
mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xd0100000
mskc0: MSI count : 2
mskc0: RAM buffer size : 4KB
mskc0: Port 0 : Rx Queue 2KB(0x00000000:0x000007ff)
mskc0: Port 0 : Tx Queue 2KB(0x00000800:0x00000fff)
msk0: <Marvell Technology Group Ltd. Yukon FE Id 0xb7 Rev 0x01> on mskc0
msk0: bpf attached
msk0: Ethernet address: 00:1b:24:0e:bc:26
miibus0: <MII bus> on msk0
e1000phy0: <Marvell 88E3082 10/100 Fast Ethernet PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49
mskc0: [MPSAFE]
mskc0: [FILTER]



More information about the freebsd-stable mailing list