Problem with the installer sysinstall.

[Michael Butler]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Bruno Ducrot wrote:
>>  > cpu0: <ACPI CPU> on acpi0
>>  > acpi_perf0: <ACPI CPU Frequency Control> on cpu0
>>  > acpi_throttle0: <ACPI CPU Throttling> on cpu0
>>  > cpu1: <ACPI CPU> on acpi0
>>  > acpi_throttle1: <ACPI CPU Throttling> on cpu1
>>  > acpi_throttle1: failed to attach P_CNT
>>  > device_attach: acpi_throttle1 attach returned 6
>
> Anyway the OP should enable eist and p4tcc (by loading cpufreq on boot)
> and both acpi_perf and acpi_throttle will be gone.

Adding 'device cpufreq' results in dmesg looking like ..

acpi0: <TOSINV Capell00> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
    ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
    ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
    ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler
    ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
    ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc64090e0), AE_NOT_EXIST
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82945GM (945GM GMCH) SVGA controller> port 0x1800-0x1807
mem 0xdc100000-0xdc17ffff,0xc0000000-0xcfffffff,0xdc200000-0xdc23ffff
irq 16 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
drmsub0: <Intel i945GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xdc100000 0MB
info: [drm] Initialized i915 1.4.0 20060119
pci0: <display> at device 2.1 (no driver attached)
pcm0: <Intel 82801G High Definition Audio Controller> mem
0xdc240000-0xdc243fff irq 22 at device 27.0 on pci0

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (FreeBSD)

iD8DBQFFUNUEQv9rrgRC1JIRAnolAJwPDqa1scbzwa/zLHU3SQeenV68XgCdEyad
gGPXRIJKkx2Hc6ZWyi/tX1g=
=fkpm
-----END PGP SIGNATURE-----