ciss0: ADAPTER HEARTBEAT FAILED? on a new bought HP dl360g3 |
DMESG attached
Dennis Berger
db at nipsi.de
Wed May 31 04:40:06 PDT 2006
Dennis Berger wrote:
> Hey list,
> after a few hours of uptime I get an highlighted kernelmessage.
> "ciss0: ADAPTER HEARTBEAT FAILED" yes this are capital chars.
> I wonder if this can be a driver problem or if it definitly a hardware
> failure.
>
> Server is a fresh HP DL360g3
> sorry i can't attach a dmesg cause the machine don't boot anymore.
> stuck during bootloader with IO/ error.
>
>
> regards,
> Dennis
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
-------------- next part --------------
Table 'FACP' at 0xbfff3340
Table 'SPCR' at 0xbfff3140
Table 'MCFG' at 0xbfff31c0
Table 'APIC' at 0xbfff3200
MADT: Found table at 0xbfff3200
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 4 ACPI ID 4: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 6 ACPI ID 6: disabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 5 ACPI ID 5: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
MADT: Found CPU APIC ID 7 ACPI ID 7: disabled
ACPI APIC Table: <HP 00000083>
Calibrating clock(s) ... i8254 clock: 1193220 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3200130128 Hz
CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3200.13-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf43 Stepping = 3
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
Logical CPUs per core: 2
real memory = 3221172224 (3071 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x00000000bc9bafff, 3151585280 bytes (769430 pages)
avail memory = 3151409152 (3005 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x96
pnpbios: Found PnP BIOS data at 0xc00f4f70
pnpbios: Entry = f0000:ae45 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec10000
ioapic1: Changing APIC ID to 9
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec82000
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec82400
ioapic3: intpin 0 -> PCI IRQ 72 (level, low)
ioapic3: intpin 1 -> PCI IRQ 73 (level, low)
ioapic3: intpin 2 -> PCI IRQ 74 (level, low)
ioapic3: intpin 3 -> PCI IRQ 75 (level, low)
ioapic3: intpin 4 -> PCI IRQ 76 (level, low)
ioapic3: intpin 5 -> PCI IRQ 77 (level, low)
ioapic3: intpin 6 -> PCI IRQ 78 (level, low)
ioapic3: intpin 7 -> PCI IRQ 79 (level, low)
ioapic3: intpin 8 -> PCI IRQ 80 (level, low)
ioapic3: intpin 9 -> PCI IRQ 81 (level, low)
ioapic3: intpin 10 -> PCI IRQ 82 (level, low)
ioapic3: intpin 11 -> PCI IRQ 83 (level, low)
ioapic3: intpin 12 -> PCI IRQ 84 (level, low)
ioapic3: intpin 13 -> PCI IRQ 85 (level, low)
ioapic3: intpin 14 -> PCI IRQ 86 (level, low)
ioapic3: intpin 15 -> PCI IRQ 87 (level, low)
ioapic3: intpin 16 -> PCI IRQ 88 (level, low)
ioapic3: intpin 17 -> PCI IRQ 89 (level, low)
ioapic3: intpin 18 -> PCI IRQ 90 (level, low)
ioapic3: intpin 19 -> PCI IRQ 91 (level, low)
ioapic3: intpin 20 -> PCI IRQ 92 (level, low)
ioapic3: intpin 21 -> PCI IRQ 93 (level, low)
ioapic3: intpin 22 -> PCI IRQ 94 (level, low)
ioapic3: intpin 23 -> PCI IRQ 95 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010000
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
rr232x: RocketRAID 232x controller driver v1.02 (May 7 2006 04:32:33)
npx0: INT 16 interface
acpi0: <HP P54> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35908086)
pcibios: BIOS version 2.10
Setting up PCIe mappings for BAR 0xe0000000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
ACPI timer: 1/2 1/2 1/1 1/2 1/1 1/2 1/2 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x3590, revid=0x0c
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0146, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3595, revid=0x0c
bus=0, slot=2, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x3597, revid=0x0c
bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x3599, revid=0x0c
bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x25ae, revid=0x02
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0030, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25a9, revid=0x02
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type 4, range 32, base 00002000, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x25aa, revid=0x02
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 00002020, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 19
found-> vendor=0x8086, dev=0x25ab, revid=0x02
bus=0, slot=29, func=4
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25ac, revid=0x02
bus=0, slot=29, func=5
class=08-00-20, hdrtype=0x00, mfdev=0
cmdreg=0x0146, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25ad, revid=0x02
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fbee0000, size 10, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 23
found-> vendor=0x8086, dev=0x244e, revid=0x0a
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25a1, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x014f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x25a2, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type 4, range 32, base 00000500, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pcib1: secondary bus 13
pcib1: subordinate bus 15
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfff00000-0xfffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci13: <ACPI PCI bus> on pcib1
pci13: physical bus=13
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib2: secondary bus 6
pcib2: subordinate bus 12
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfff00000-0xfffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib2
pci6: physical bus=6
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=6, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=6, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci6
pcib3: secondary bus 7
pcib3: subordinate bus 9
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci7: <ACPI PCI bus> on pcib3
pci7: physical bus=7
pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci6
pcib4: secondary bus 10
pcib4: subordinate bus 12
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci10: <ACPI PCI bus> on pcib4
pci10: physical bus=10
pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib5: secondary bus 3
pcib5: subordinate bus 5
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xfff00000-0xfffff
pcib5: prefetched decode 0xfff00000-0xfffff
pci3: <ACPI PCI bus> on pcib5
pci3: physical bus=3
pcib6: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib6: secondary bus 2
pcib6: subordinate bus 2
pcib6: I/O decode 0x4000-0x4fff
pcib6: memory decode 0xfdf00000-0xfdffffff
pcib6: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib6
pci2: physical bus=2
found-> vendor=0x0e11, dev=0x0046, revid=0x01
bus=2, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D3 current D0
map[10]: type 1, range 64, base fdff0000, size 13, enabled
pcib6: (null) requested memory range 0xfdff0000-0xfdff1fff: good
map[18]: type 4, range 32, base 00004000, size 8, enabled
pcib6: (null) requested I/O range 0x4000-0x40ff: in range
map[1c]: type 1, range 64, base fdf80000, size 18, enabled
pcib6: (null) requested memory range 0xfdf80000-0xfdfbffff: good
pcib6: matched entry for 2.1.INTA
pcib6: slot 1 INTA hardwired to IRQ 24
found-> vendor=0x14e4, dev=0x1648, revid=0x10
bus=2, slot=2, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fdf70000, size 16, enabled
pcib6: (null) requested memory range 0xfdf70000-0xfdf7ffff: good
pcib6: matched entry for 2.2.INTA
pcib6: slot 2 INTA hardwired to IRQ 25
found-> vendor=0x14e4, dev=0x1648, revid=0x10
bus=2, slot=2, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fdf60000, size 16, enabled
pcib6: (null) requested memory range 0xfdf60000-0xfdf6ffff: good
pcib6: matched entry for 2.2.INTB
pcib6: slot 2 INTB hardwired to IRQ 26
ciss0: <HP Smart Array 6i> port 0x4000-0x40ff mem 0xfdff0000-0xfdff1fff,0xfdf80000-0xfdfbffff irq 24 at device 1.0 on pci2
ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdff0000
ioapic1: routing intpin 0 (PCI IRQ 24) to vector 49
ciss0: [GIANT-LOCKED]
ciss0: using 256 of 1024 available commands
ciss0: firmware 2.58
ciss0: 1 SCSI channels
ciss0: signature 'CISS'
ciss0: valence 1
ciss0: supported I/O methods 0x80000006<simple,performant>
ciss0: active I/O method 0x3<simple>
ciss0: 4G page base 0x00000000
ciss0: interrupt coalesce delay 1000us
ciss0: interrupt coalesce count 16
ciss0: max outstanding commands 1024
ciss0: bus types 0x4
ciss0: server name ''
ciss0: heartbeat 0x47
ciss0: 3 physical devices
ciss0: 1 logical drive
ciss0: logical drive (b0t0): RAID 0, 571904MB online
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xfdf70000-0xfdf7ffff irq 25 at device 2.0 on pci2
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdf70000
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:17:08:51:82:22
ioapic1: routing intpin 1 (PCI IRQ 25) to vector 50
bge0: [MPSAFE]
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem 0xfdf60000-0xfdf6ffff irq 26 at device 2.1 on pci2
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdf60000
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:17:08:51:82:21
ioapic1: routing intpin 2 (PCI IRQ 26) to vector 51
bge1: [MPSAFE]
uhci0: <UHCI (generic) USB controller> port 0x2000-0x201f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 52
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x2020-0x203f irq 19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x2020
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 53
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfbee0000-0xfbee03ff irq 23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbee0000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 54
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib7: secondary bus 1
pcib7: subordinate bus 1
pcib7: I/O decode 0x1000-0x3fff
pcib7: memory decode 0xfbf00000-0xfcffffff
pcib7: prefetched decode 0xfff00000-0xfffff
pcib7: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib7
pci1: physical bus=1
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc000000, size 24, enabled
pcib7: (null) requested memory range 0xfc000000-0xfcffffff: good
map[14]: type 4, range 32, base 00003000, size 8, enabled
pcib7: (null) requested I/O range 0x3000-0x30ff: in range
map[18]: type 1, range 32, base fbff0000, size 12, enabled
pcib7: (null) requested memory range 0xfbff0000-0xfbff0fff: good
found-> vendor=0x0e11, dev=0xb203, revid=0x01
bus=1, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001800, size 8, enabled
pcib7: (null) requested I/O range 0x1800-0x18ff: in range
map[14]: type 1, range 32, base fbfe0000, size 9, enabled
pcib7: (null) requested memory range 0xfbfe0000-0xfbfe01ff: good
pcib7: matched entry for 1.4.INTA
pcib7: slot 4 INTA hardwired to IRQ 21
found-> vendor=0x0e11, dev=0xb204, revid=0x01
bus=1, slot=4, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00003400, size 8, enabled
pcib7: (null) requested I/O range 0x3400-0x34ff: in range
map[14]: type 1, range 32, base fbfd0000, size 11, enabled
pcib7: (null) requested memory range 0xfbfd0000-0xfbfd07ff: good
map[18]: type 1, range 32, base fbfc0000, size 13, enabled
pcib7: (null) requested memory range 0xfbfc0000-0xfbfc1fff: good
map[1c]: type 1, range 32, base fbf00000, size 19, enabled
pcib7: (null) requested memory range 0xfbf00000-0xfbf7ffff: good
pcib7: matched entry for 1.4.INTB
pcib7: slot 4 INTB hardwired to IRQ 22
pci1: <display, VGA> at device 3.0 (no driver attached)
pci1: <base peripheral> at device 4.0 (no driver attached)
pci1: <base peripheral> at device 4.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 18 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 55
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: stat1=0x01 err=0x01 lsb=0x01 msb=0x01
ata1: reset tp2 stat0=01 stat1=01 devices=0x0
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 56
ata1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0xabc6 (0)
atkbd: failed to reset the keyboard.
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 57
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 58
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x40a1 0x40b1 0x40a1 0x40a1
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 59
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 60
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed 0
unknown: status reg test failed f0
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x40e1 0x40e1 0x40e1 0x40e1
sio1: probe failed test(s): 4
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 198753 -> 100000
procfs registered
lapic: Divisor 2, Frequency 100003698 hz
Timecounter "TSC" frequency 3200130128 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
rr232x: no controller detected.
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd0: setting PIO4 on 6300ESB chip
acd0: <HL-DT-ST GCR-8240N/2.03> CDROM drive at ata0 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
ciss0: command status 0x1 (target status) scsi status 0x2
(probe0:ciss0:0:0:0): error 22
(probe0:ciss0:0:0:0): Unretryable Error
pass0 at ciss0 bus 0 target 0 lun 0
pass0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
pass0: 135.168MB/s transfers
da0 at ciss0 bus 0 target 0 lun 0
da0: <COMPAQ RAID 0 VOLUME OK> Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 572195MB (1171856412 512 byte sectors: 255H 63S/T 65535C)
ATA PseudoRAID loaded
GEOM: new disk da0
Trying to mount root from ufs:/dev/da0s1a
WARNING: / was not properly dismounted
start_init: trying /sbin/init
WARNING: /data was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
bge0: link state changed to UP
bge0: link UP
More information about the freebsd-stable
mailing list