GEOM problems again...

Sun May 21 19:12:06 PDT 2006

Hi,

Sorry this is only a 'me too' message...

On Sun, 21 May 2006 11:16:14 +0200,
	Johan Ström <johan at stromnet.org> said:

> May 21 02:04:58 elfi kernel: ad6: FAILURE - device detached
> May 21 02:04:58 elfi kernel: subdisk6: detached
> May 21 02:04:58 elfi kernel: ad6: detached
> May 21 02:04:58 elfi kernel: GEOM_MIRROR: Device gm0s1: provider  
> ad6s1 disconnected.

I have a similar problem on a different M/B (Intel D925XECV2).  I'm
not sure if it is only a coincidence or somewhat related.

May 21 07:43:49 elvenbow kernel: ad4: FAILURE - device detached
May 21 07:43:49 elvenbow kernel: subdisk4: detached
May 21 07:43:49 elvenbow kernel: ad4: detached
May 21 07:43:49 elvenbow kernel: GEOM_MIRROR: Device gm0s1: provider ad4s1 disconnected.

excerpts from dmesg:

atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f mem 0xf3afbc00-0xf3afbfff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1

ad4: 239372MB <Maxtor 7V250F0 VA111610> at ata2-master SATA150
ad6: 239372MB <Maxtor 7V250F0 VA111610> at ata3-master SATA150

I purchased and started using this new PC last December, and the
problem occurred several times by now.  Both ad4 and ad6 have been
detached (not at a time).  'atacontrol reinit' paused the system for a
second, and returned without detecting the detached device.  I need a
complete power cycle or the device won't recognized by BIOS again.
There is no SMART error recorded on these drives.

I'm considering to change M/B, but it is difficult right now...

dmesg.boot is attached.

Ah, the system is running FreeBSD 6.1-STABLE amd64.

FreeBSD elvenbow.cc.kyushu-u.ac.jp 6.1-STABLE FreeBSD 6.1-STABLE #0: Mon May  8 16:54:22 JST 2006     root at elvenbow.cc.kyushu-u.ac.jp:/usr/obj/usr/src/sys/ELVENBOW  amd64

-- 
Yoshiaki Kasahara
Computing and Communications Center, Kyushu University
kasahara at nc.kyushu-u.ac.jp
-------------- next part --------------
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #0: Mon May  8 16:54:22 JST 2006
    root at elvenbow.cc.kyushu-u.ac.jp:/usr/obj/usr/src/sys/ELVENBOW
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3000.10-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  Logical CPUs per core: 2
real memory  = 2145579008 (2046 MB)
avail memory = 2060705792 (1965 MB)
ACPI APIC Table: <INTEL  D925CV2 >
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <INTEL D925CV2> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: Please update driver or contact the maintainer.
est: cpu_vendor GenuineIntel, msr f2d00000f2d, bus_clk, 64
device_attach: est0 attach returned 6
p4tcc0: <CPU Frequency Thermal Control> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci3: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib5
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xcc00-0xcc1f irq 23 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem 0xf3afb800-0xf3afbbff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
vge0: <VIA Networking Gigabit Ethernet> port 0xb800-0xb8ff mem 0xf3b00000-0xf3b000ff irq 22 at device 1.0 on pci6
miibus0: <MII bus> on vge0
ciphy0: <Cicada CS8201 10/100/1000TX PHY> on miibus0
ciphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vge0: Ethernet address: 00:02:2a:dd:05:41
vge1: <VIA Networking Gigabit Ethernet> port 0xb400-0xb4ff mem 0xf3b00400-0xf3b004ff irq 18 at device 2.0 on pci6
miibus1: <MII bus> on vge1
ciphy1: <Cicada CS8201 10/100/1000TX PHY> on miibus1
ciphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vge1: Ethernet address: 00:02:2a:dd:0c:31
vge2: <VIA Networking Gigabit Ethernet> port 0xb000-0xb0ff mem 0xf3b00800-0xf3b008ff irq 19 at device 3.0 on pci6
miibus2: <MII bus> on vge2
ciphy2: <Cicada CS8201 10/100/1000TX PHY> on miibus2
ciphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
vge2: Ethernet address: 00:02:2a:dd:00:7d
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH6 SATA150 controller> port 0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f mem 0xf3afbc00-0xf3afbfff irq 19 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ichsmb0: <SMBus controller> port 0xc800-0xc81f irq 19 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f0-0x3f1,0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 2.00/4.24, addr 2, iclass 3/1
ums0: 5 buttons and Z dir and a TILT dir.
Timecounter "TSC" frequency 3000098070 Hz quality 800
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062fd50, 0) error 6
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging disabled
acd0: DVDR <HL-DT-ST DVDRAM GSA-4167B/DL12> at ata0-master UDMA33
ad4: 239372MB <Maxtor 7V250F0 VA111610> at ata2-master SATA150
ad6: 239372MB <Maxtor 7V250F0 VA111610> at ata3-master SATA150
GEOM_MIRROR: Device gm0s1 created (id=400615043).
GEOM_MIRROR: Device gm0s1: provider ad4s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 detected.
GEOM_MIRROR: Device gm0s1: provider ad6s1 activated.
GEOM_MIRROR: Device gm0s1: provider mirror/gm0s1 launched.
GEOM_MIRROR: Device gm0s1: rebuilding provider ad4s1.
Trying to mount root from ufs:/dev/mirror/gm0s1a