ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - on FreeBSD 6-STABLE

[Sam Stein]

Have you tried it with a livecd or something?
+++ Peter van Heusden [freebsd] [24/03/06 09:51 +0200]:
>Hi
>
>After my previous email about the SETFEATURES SET TRANSFER MODE timeout 
>on (msgid 441AA807.5090100 at wfeet.za.net , 17 March 14:18 GMT + 2 on 
>freebsd-stable), I installed FreeBSD 6.1 BETA 4 and upgraded to a 
>6-STABLE kernel, running the box in 'safe' mode to do so. I now, 
>however, get a slightly different error message:
>
>ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - 
>completing request directly
>ad4: WARNING - SETFEATURES SET TRANSFER MODE taskqueue timeout - 
>completing request directly
>ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing 
>request directly
>ad4: WARNING - SETFEATURES ENABLE RCACHE taskqueue timeout - completing 
>request directly
>ad4: WARNING - SETFEATURES ENABLE WCACHE taskqueue timeout - completing 
>request directly
>ad4: WARNING - SET_MULTI taskqueue timeout - completing request directly
>ad4: FAILURE - WRITE_DMA timed out LBA=32804495
>
>(The address after LBA is not always the same)
>
>This is with ad4 as a Seagate ST320423A on a Promise PDC20262 UDMA66 
>controller.
>
>Any suggestions?
>
>Thanks,
>Peter
>
>
>_______________________________________________
>freebsd-stable at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"

-- 

b1tt3r -- You know, like sugar?
Sam Stein
Computer TeXnician/Programmer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060324/ef5d9b9a/attachment-0001.pgp