ath problems when in if_bridge mode

[JoaoBR]

Hi

I find some problems when running ath cards in if_bridge mode.

I have continuous UP/DOWN events on the uplink card. The connection is really 
interrupted for a second or so which results in dns lookup errors 
downloads are going through, only the download speed is not stable

please look close, the problem is not on the hostap card

the problem is not hw related, I can switch both cards and the problem stays 
on the uplink card

I can take the bridge off and stay connected without UP/DOWN events (same 
machine/same HW)

the other wierd thing is that when I compile ath_rate_sample the both cards 
are working basicly but no traffic goes through the bridge, when I compile 
ath_rate_onoe the traffic goes through, when I take the bridge off and use 
the machine as router the traffic goes through.

the above does not change wether I put the uplink card in STP or not
I tried latest releng_6 i386 and amd64 and it is the same result

If you think I should check something please tell me

João



Jun  6 11:43:17 ap-h kernel: ath0: link state changed to DOWN
Jun  6 11:43:17 ap-h kernel: ath0: link state changed to UP
Jun  6 11:43:23 ap-h kernel: ath0: link state changed to DOWN
Jun  6 11:43:23 ap-h kernel: ath0: link state changed to UP
Jun  6 11:43:30 ap-h kernel: ath0: link state changed to DOWN
Jun  6 11:43:30 ap-h kernel: ath0: link state changed to UP
Jun  6 11:43:45 ap-h kernel: ath0: link state changed to DOWN
Jun  6 11:43:45 ap-h kernel: ath0: link state changed to UP



ifconfig

ath0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        inet 200.152.80.36 netmask 0xfffffff8 broadcast 200.152.80.39
        ether 00:13:46:8b:f2:52
        media: IEEE 802.11 Wireless Ethernet DS/11Mbps (DS/11Mbps)
        status: associated
        ssid LUCENET-CS channel 1 bssid 00:02:6f:3a:98:b3
        authmode OPEN privacy ON deftxkey 1 wepkey 1:40-bit wepkey 2:40-bit
        wepkey 3:40-bit wepkey 4:40-bit txpowmax 36 protmode CTS burst
        bintval 100
ath1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500
        inet 200.152.88.33 netmask 0xfffffff8 broadcast 200.152.88.39
        ether 00:11:95:c2:2a:80
        media: IEEE 802.11 Wireless Ethernet OFDM/54Mbps mode 11g <hostap>
        status: associated
        ssid casa channel 11 bssid 00:11:95:c2:2a:80
        authmode OPEN privacy OFF txpowmax 36 protmode CTS burst ssid HIDE
        -apbridge dtimperiod 1 bintval 100
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
        inet 127.0.0.1 netmask 0xff000000
bridge0: flags=8043<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
        ether ac:de:48:da:2b:db
        priority 32768 hellotime 2 fwddelay 15 maxage 20
        member: ath1 flags=7<LEARNING,DISCOVER,STP>
                port 2 priority 128 path cost 55 forwarding
        member: ath0 flags=3<LEARNING,DISCOVER>







A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura.
Service fornecido pelo Datacenter Matik  https://datacenter.matik.com.br