bge stopped working with latest 6.0-stable

[Danny Braniss]

> At 10:29 AM 31/01/2006, Danny Braniss wrote:
> >with the latest cvsup - this morning - the bge stopped working.
> 
> There was other breakage at the same time that got commited. Can you 
> add Rev 1.292.2.7 of pci.c ?
> 
> http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/pci/pci.c
> 

BINGO!

thanks,
	danny
PS: now to see if it also fixes the ar0 breakage.

> 
> I am using the lastest in the tree and it works for me on my PCI-e 
> versions of the NICs
> 
> brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:10:18:14:15:12
> pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
> pci4: <ACPI PCI bus> on pcib4
> bge1: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 
> 0xd3000000-0xd300ffff irq 19 at device 0.0 on pci4
> miibus2: <MII bus> on bge1
> brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus2
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:10:18:14:38:d2
> 
> 
> bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>          options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
>          inet 172.29.13.4 netmask 0xffffff00 broadcast 172.29.13.255
>          ether 00:10:18:14:15:12
>          media: Ethernet autoselect (1000baseTX <full-duplex>)
>          status: active
> 
> 
> 
> >...
> >bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem
> >0xefcf0000-0xefcfffff irq 11 at device 0.0 on pci2
> >miibus0: <MII bus> on bge0
> >brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
> >brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> >1000baseTX-FDX, auto
> >bge0: Ethernet address: 00:12:3f:96:c0:ad
> >...
> >Trying to mount root from nfs:
> >NFS ROOT: 132.65.16.112:/d/8
> >bge0: link state changed to DOWN
> >bge0: link state changed to UP
> >
> >and now all is stuck.
> >unplugging/plugging seems to be recognized.
> >
> >btw, the last working version that i have is:
> >__FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.91.2.8 2006/01/13 19:21:43
> >glebius Exp $")
> >
> >thanks,
> >
> >         danny
> >
> >
> >_______________________________________________
> >freebsd-stable at freebsd.org mailing list
> >http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> >To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>