bge stopped working with latest 6.0-stable

[Mike Tancsa]

At 10:29 AM 31/01/2006, Danny Braniss wrote:
>with the latest cvsup - this morning - the bge stopped working.

There was other breakage at the same time that got commited. Can you 
add Rev 1.292.2.7 of pci.c ?

http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/pci/pci.c


I am using the lastest in the tree and it works for me on my PCI-e 
versions of the NICs

brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus1
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:10:18:14:15:12
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
bge1: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem 
0xd3000000-0xd300ffff irq 19 at device 0.0 on pci4
miibus2: <MII bus> on bge1
brgphy1: <BCM5750 10/100/1000baseTX PHY> on miibus2
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge1: Ethernet address: 00:10:18:14:38:d2


bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
         inet 172.29.13.4 netmask 0xffffff00 broadcast 172.29.13.255
         ether 00:10:18:14:15:12
         media: Ethernet autoselect (1000baseTX <full-duplex>)
         status: active



>...
>bge0: <Broadcom BCM5751 Gigabit Ethernet, ASIC rev. 0x4001> mem
>0xefcf0000-0xefcfffff irq 11 at device 0.0 on pci2
>miibus0: <MII bus> on bge0
>brgphy0: <BCM5750 10/100/1000baseTX PHY> on miibus0
>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>1000baseTX-FDX, auto
>bge0: Ethernet address: 00:12:3f:96:c0:ad
>...
>Trying to mount root from nfs:
>NFS ROOT: 132.65.16.112:/d/8
>bge0: link state changed to DOWN
>bge0: link state changed to UP
>
>and now all is stuck.
>unplugging/plugging seems to be recognized.
>
>btw, the last working version that i have is:
>__FBSDID("$FreeBSD: src/sys/dev/bge/if_bge.c,v 1.91.2.8 2006/01/13 19:21:43
>glebius Exp $")
>
>thanks,
>
>         danny
>
>
>_______________________________________________
>freebsd-stable at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"