AMD64 Issue with russian symbols on FAT32

Seva Fwd seva_fwd at yahoo.com
Sun Mar 6 13:17:34 PST 2005


Hi, all

I have installed FreeBSD/amd64 from February 2005
snapshot (5.3-STABLE-SNAP001-amd64-miniinst.iso) and
have issues with Russian symbols support on FAT32
partitions.
I am using options -Lru_RU.KOI8-R,-Wkoi2dos in
/etc/fstab to turn support of Russian file names on.
If I mount partition without these options everithing
works well except Russian names are unavailable.
However, if I mount partition with these options it
does not help with Russian names, and even more
english names becomes abracadabra.
I think it is issue of amd64 (i.e. 64/32
incompatibility). I suspect iconv.
I am sure partitions itself are correct due to same
partitions (I mean same hdd and usd disks) are
operating well on i386 arch. And even a (Frenzy) Live
CD that is i386 arch works well on the same computer.

Here is outpu of dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
	The Regents of the University of California. All
rights reserved.
FreeBSD 5.3-STABLE-SNAP001 #0: Sun Jan 30 03:45:41 UTC
2005
   
root at bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3500+ (2202.83-MHz
K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x10ff0  Stepping = 0
 
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD
Features=0xe2500800<SYSCALL,NX,MMX+,<b25>,LM,3DNow+,3DNow>
real memory  = 1073414144 (1023 MB)
avail memory = 1024745472 (977 MB)
MADT: Forcing active-low polarity and level trigger
for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality
1000
acpi_timer0: <24-bit timer at 3.579545MHz> port
0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
pci1: <display> at device 0.1 (no driver attached)
fwohci0: <VIA Fire II (VT6306)> port 0x8400-0x847f mem
0xfb300000-0xfb3007ff irq 16 at device 7.0 on pci0
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:00:bf:7c:39
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:bf:7c:39
fwe0: Ethernet address: 02:e0:18:bf:7c:39
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <Promise PDC20378 SATA150 controller> port
0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem
0xfb400000-0xfb41ffff,0xfb500000-0xfb500fff irq 18 at
device 8.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
ata4: channel #2 on atapci0
skc0: <Marvell Gigabit Ethernet> port 0x9800-0x98ff
mem 0xfb700000-0xfb703fff irq 17 at device 10.0 on
pci0
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:1b:f1:7a
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, 1000baseTX-FDX, auto
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff
mem 0xfb900000-0xfb9000ff irq 18 at device 13.0 on
pci0
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus1
rlphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
rl0: Ethernet address: 00:00:1c:d7:54:e8
pci0: <network> at device 14.0 (no driver attached)
atapci1: <VIA 6420 SATA150 controller> port
0xa400-0xa4ff,0xa800-0xa80f,0xb000-0xb003,0xb400-0xb407,0xb800-0xb803,0xc000-0xc007
irq 20 at device 15.0 on pci0
ata5: channel #0 on atapci1
ata6: channel #1 on atapci1
atapci2: <VIA 8237 UDMA133 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at
device 15.1 on pci0
ata0: channel #0 on atapci2
ata1: channel #1 on atapci2
uhci0: <VIA 83C572 USB controller> port 0xc400-0xc41f
irq 21 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc800-0xc81f
irq 21 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xd000-0xd01f
irq 21 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xd400-0xd41f
irq 21 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.4 (no driver
attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver
attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller (FDE)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port
0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff
irq 3 flags 0x10 on acpi0
sio0: type 16550A
sio1: configured irq 4 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x3f8-0x3ff
irq 4 on acpi0
sio1: type 16550A
orm0: <ISA Option ROMs> at iomem
0xcd000-0xd0fff,0xc0000-0xccfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2202828102 Hz quality 800
Timecounters tick every 1.000 msec
acd0: DVDR <NEC DVD RW ND-2510A/2.16> at ata1-master
UDMA33
ad10: 152627MB <WDC WD1600JD-22HBB0/08.02D08>
[310101/16/63] at ata5-master SATA150
Mounting root from ufs:/dev/ad10s2a
ipfw2 initialized, divert disabled, rule-based
forwarding disabled, default to deny, logging disabled



	
		
__________________________________ 
Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 
http://birthday.yahoo.com/netrospective/


More information about the freebsd-stable mailing list