twa breakage on
AMD64with9.1.5.23wareversionand2005-01-1103:00:49UTC RELENG_5commit
KSA Technologies
ksatechnologies at comcast.net
Sat Jan 22 05:11:29 PST 2005
Vinod,
That patch worked. Received a clean buildkernel, installkernel and boot
with the patch you supplied.
Thanks,
Kev
-----Original Message-----
From: Vinod Kashyap [mailto:vkashyap at amcc.com]
Sent: Friday, January 21, 2005 2:23 PM
To: ksatechnologies at comcast.net; freebsd-stable at freebsd.org
Subject: RE: twa breakage on
AMD64with9.1.5.23wareversionand2005-01-1103:00:49UTC RELENG_5 commit
Let me know if the attached patch works for you too.
> -----Original Message-----
> From: owner-freebsd-stable at freebsd.org
> [mailto:owner-freebsd-stable at freebsd.org]On Behalf Of
> ksatechnologies at comcast.net
> Sent: Friday, January 21, 2005 8:36 AM
> To: freebsd-stable at freebsd.org
> Subject: twa breakage on
> AMD64with9.1.5.23wareversionand2005-01-1103:00:49UTC RELENG_5 commit
>
>
> I also have the same problem with the new 3ware drivers
> 9.1.5.2 in -STABLE but I am using the i386 platform with a
> Xeon 3.0Ghz processor.
> I have one RAID-1 array and one RAID-5 array on the 9500s controller.
> /var and /usr/local on the RAID-5
>
> Following the FreeBSD instructions to build -STABLE
>
> make -j8 buildworld
> make buildkernel KERNCONF="mykernelconf"
> make installkernel KERNCONF="mykernelconf"
> reboot
>
> And it worked. All was fine. Then....
>
> mergemaster -p
> make installworld
> mergemaster
> reboot
>
> Then I could not get to the server via SSH. Found that the
> console had the exactly the same symptoms describe in the
> thread. I rebooted and at the Daemon Logo I did a "boot
> kernel.old" which worked with no problem. The dmesgs are
> below. First, 3Ware 9.1.5.2 driver "kernel" and the second
> is the "kernel.old" boot.
>
> --------------/etc/make.conf-------------------------------------
> # -- use.perl generated deltas -- #
> # Created: Thu Nov 25 08:12:18 2004
> # Setting to use base perl from ports:
> PERL_VER=5.8.5
> PERL_VERSION=5.8.5
> PERL_ARCH=mach
> NOPERL=yo
> NO_PERL=yo
> NO_PERL_WRAPPER=yo
> CPUTYPE=p4
> CFLAGS= -O2 -pipe -funroll-loops -ffast-math
> #CFLAGS= -pipe -funroll-loops -ffast-math
> COPTFLAGS= -O2 -pipe -funroll-loops -ffast-math
>
>
> ------------------Kernel With 3Ware 9.1.5.2--------------------
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD 5.3-STABLE #0: Thu Jan 20 17:54:09 EST 2005
> root at mail.barsproducts.com:/usr/obj/usr/src/sys/BarsMail
> ACPI APIC Table: <IntelR AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P
BE>
> Hyperthreading: 2 logical CPUs
> real memory = 1072562176 (1022 MB)
> avail memory = 1040035840 (991 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <IntelR AWRDACPI> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
> port 0xa000-0xa01f mem
> 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device
> 1.0 on pci1
> em0: Ethernet address: 00:11:2f:5a:7e:df
> em0: Speed:N/A Duplex:N/A
> pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> 3ware device driver for 9000 series storage controllers,
> version: 2.50.02.011
> twa0: <3ware 9000 series Storage Controller> port
> 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff
> irq 27 at device 2.0 on pci2
> twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
> twa0: [GIANT-LOCKED]
> uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq
> 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq
> 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <base peripheral> at device 29.4 (no driver attached)
> pci0: <base peripheral, interrupt controller> at device 29.5
> (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <display, VGA> at device 4.0 (no driver attached)
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
> port 0xc400-0xc43f mem
> 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device
> 5.0 on pci3
> em1: Ethernet address: 00:11:2f:5a:7e:e0
> em1: Speed:N/A Duplex:N/A
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 6300ESB UDMA100 controller> port
> 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device
> 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6
> drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4
> flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0: <ECP parallel printer port> port
> 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse Explorer, device ID 4
> orm0: <ISA Option ROMs> at iomem
> 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
> SMP: AP CPU #1 Launched!
>
> -----------------Kernel.old pre 9.1.5.2 ---------------------
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
> 1993, 1994
> The Regents of the University of California. All
> rights reserved.
> FreeBSD 5.3-STABLE #1: Mon Dec 27 10:27:38 EST 2004
> root@:/usr/obj/usr/src/sys/BarsMail1
> ACPI APIC Table: <IntelR AWRDACPI>
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf34 Stepping = 4
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,P
BE>
> Hyperthreading: 2 logical CPUs
> real memory = 1072562176 (1022 MB)
> avail memory = 1044226048 (995 MB)
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <IntelR AWRDACPI> on motherboard
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
> port 0xa000-0xa01f mem
> 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device
> 1.0 on pci1
> em0: Ethernet address: 00:11:2f:5a:7e:df
> em0: Speed:N/A Duplex:N/A
> pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> 3ware device driver for 9000 series storage controllers,
> version: 2.50.00.000
> twa0: <3ware 9000 series Storage Controller> port
> 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff
> irq 27 at device 2.0 on pci2
> twa0: [GIANT-LOCKED]
> twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
> uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq
> 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq
> 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> pci0: <base peripheral> at device 29.4 (no driver attached)
> pci0: <base peripheral, interrupt controller> at device 29.5
> (no driver attached)
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci3: <ACPI PCI bus> on pcib3
> pci3: <display, VGA> at device 4.0 (no driver attached)
> em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35>
> port 0xc400-0xc43f mem
> 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device
> 5.0 on pci3
> em1: Ethernet address: 00:11:2f:5a:7e:e0
> em1: Speed:N/A Duplex:N/A
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel 6300ESB UDMA100 controller> port
> 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device
> 31.1 on pci0
> ata0: channel #0 on atapci0
> ata1: channel #1 on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6
> drq 2 on acpi0
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4
> flags 0x10 on acpi0
> sio0: type 16550A
> sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> sio1: type 16550A
> ppc0: <ECP parallel printer port> port
> 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/9 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model IntelliMouse Explorer, device ID 4
> orm0: <ISA Option ROMs> at iomem
> 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> pmtimer0 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
> 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
> da0 at twa0 bus 0 target 0 lun 0
> da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
> da0: 100.000MB/s transfers
> da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
> da1 at twa0 bus 0 target 1 lun 0
> da1: <3ware Logical Disk 01 1.00> Fixed Direct Access SCSI-0 device
> da1: 100.000MB/s transfers
> da1: 476816MB (976519168 512 byte sectors: 255H 63S/T 60785C)
> SMP: AP CPU #1 Launched!
> Mounting root from ufs:/dev/da0s1a
> em0: Link is up 10 Mbps Full Duplex
> em0: Link is Down
> em0: Link is up 1000 Mbps Full Duplex
> --------------------------------------------------------------
> -------------------------------
>
> Hope this information might help.
>
> Thanks,
>
> Kev
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
> "freebsd-stable-unsubscribe at freebsd.org"
>
More information about the freebsd-stable
mailing list