twa breakageonAMD64with9.1.5.23wareversionand2005-01-1103:00:49UTCRELENG_5 commit

Vinod Kashyap vkashyap at amcc.com
Fri Jan 21 12:20:15 PST 2005 

Can anyone please verify if they see similar problems on
i386 RELENG_4/4.11RC3?  I have tested that 4.11RC3 works
fine, but just want to make sure...


> -----Original Message-----
> From: owner-freebsd-stable at freebsd.org
> [mailto:owner-freebsd-stable at freebsd.org]On Behalf Of Vinod Kashyap
> Sent: Friday, January 21, 2005 11:23 AM
> To: ksatechnologies at comcast.net; freebsd-stable at freebsd.org
> Subject: RE: twa
> breakageonAMD64with9.1.5.23wareversionand2005-01-1103:00:49UTCRELENG_5
> commit
> 
> 
> 
> Let me know if the attached patch works for you too.
> 
> 
> > -----Original Message-----
> > From: owner-freebsd-stable at freebsd.org
> > [mailto:owner-freebsd-stable at freebsd.org]On Behalf Of
> > ksatechnologies at comcast.net
> > Sent: Friday, January 21, 2005 8:36 AM
> > To: freebsd-stable at freebsd.org
> > Subject: twa breakage on
> > AMD64with9.1.5.23wareversionand2005-01-1103:00:49UTC RELENG_5 commit
> > 
> > 
> > I also have the same problem with the new 3ware drivers 
> > 9.1.5.2 in -STABLE but I am using the i386 platform with a 
> > Xeon 3.0Ghz processor.
> > I have one RAID-1 array and one RAID-5 array on the 9500s 
> controller.
> > /var and /usr/local on the RAID-5
> > 
> > Following the FreeBSD instructions to build -STABLE
> > 
> > make -j8 buildworld
> > make buildkernel KERNCONF="mykernelconf"
> > make installkernel KERNCONF="mykernelconf"
> > reboot
> > 
> > And it worked.  All was fine. Then....
> > 
> > mergemaster -p
> > make installworld
> > mergemaster
> > reboot
> > 
> > Then I could not get to the server via SSH.  Found that the 
> > console had the exactly the same symptoms describe in the 
> > thread.  I rebooted and at the Daemon Logo I did a "boot 
> > kernel.old"  which worked with no problem.  The dmesgs are 
> > below.  First, 3Ware 9.1.5.2 driver "kernel" and the second 
> > is the "kernel.old" boot.
> > 
> > --------------/etc/make.conf-------------------------------------
> > # -- use.perl generated deltas -- #
> > # Created: Thu Nov 25 08:12:18 2004
> > # Setting to use base perl from ports:
> > PERL_VER=5.8.5
> > PERL_VERSION=5.8.5
> > PERL_ARCH=mach
> > NOPERL=yo
> > NO_PERL=yo
> > NO_PERL_WRAPPER=yo
> > CPUTYPE=p4
> > CFLAGS= -O2 -pipe -funroll-loops -ffast-math
> > #CFLAGS= -pipe -funroll-loops -ffast-math
> > COPTFLAGS= -O2 -pipe -funroll-loops -ffast-math
> > 
> > 
> > ------------------Kernel With 3Ware 9.1.5.2--------------------
> > Copyright (c) 1992-2005 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
> > 1993, 1994
> >         The Regents of the University of California. All 
> > rights reserved.
> > FreeBSD 5.3-STABLE #0: Thu Jan 20 17:54:09 EST 2005
> >     root at mail.barsproducts.com:/usr/obj/usr/src/sys/BarsMail
> > ACPI APIC Table: <IntelR AWRDACPI>
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
> >   
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
> P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
> E2,SS,HTT,TM,PBE>
> >   Hyperthreading: 2 logical CPUs
> > real memory  = 1072562176 (1022 MB)
> > avail memory = 1040035840 (991 MB)
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >  cpu0 (BSP): APIC ID:  0
> >  cpu1 (AP): APIC ID:  1
> > ioapic0: Changing APIC ID to 4
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > npx0: [FAST]
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > acpi0: <IntelR AWRDACPI> on motherboard
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > cpu1: <ACPI CPU> on acpi0
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> 
> > port 0xa000-0xa01f mem 
> > 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device 
> > 1.0 on pci1
> > em0: Ethernet address: 00:11:2f:5a:7e:df
> > em0:  Speed:N/A  Duplex:N/A
> > pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> > pci2: <ACPI PCI bus> on pcib2
> > 3ware device driver for 9000 series storage controllers, 
> > version: 2.50.02.011
> > twa0: <3ware 9000 series Storage Controller> port 
> > 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff 
> > irq 27 at device 2.0 on pci2
> > twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
> > twa0: [GIANT-LOCKED]
> > uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 
> > 16 at device 29.0 on pci0
> > uhci0: [GIANT-LOCKED]
> > usb0: <UHCI (generic) USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 
> > 19 at device 29.1 on pci0
> > uhci1: [GIANT-LOCKED]
> > usb1: <UHCI (generic) USB controller> on uhci1
> > usb1: USB revision 1.0
> > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub1: 2 ports with 2 removable, self powered
> > pci0: <base peripheral> at device 29.4 (no driver attached)
> > pci0: <base peripheral, interrupt controller> at device 29.5 
> > (no driver attached)
> > pci0: <serial bus, USB> at device 29.7 (no driver attached)
> > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pci3: <ACPI PCI bus> on pcib3
> > pci3: <display, VGA> at device 4.0 (no driver attached)
> > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> 
> > port 0xc400-0xc43f mem 
> > 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device 
> > 5.0 on pci3
> > em1: Ethernet address: 00:11:2f:5a:7e:e0
> > em1:  Speed:N/A  Duplex:N/A
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel 6300ESB UDMA100 controller> port 
> > 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 
> > 31.1 on pci0
> > ata0: channel #0 on atapci0
> > ata1: channel #1 on atapci0
> > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 
> > drq 2 on acpi0
> > fdc0: [FAST]
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 
> > flags 0x10 on acpi0
> > sio0: type 16550A
> > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> > sio1: type 16550A
> > ppc0: <ECP parallel printer port> port 
> > 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> > ppc0: FIFO with 16/16/9 bytes threshold
> > ppbus0: <Parallel port bus> on ppc0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: model IntelliMouse Explorer, device ID 4
> > orm0: <ISA Option ROMs> at iomem 
> > 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> > pmtimer0 on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 
> > 0xa0000-0xbffff on isa0
> > Timecounters tick every 1.000 msec
> > acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
> > SMP: AP CPU #1 Launched!
> > 
> > -----------------Kernel.old pre 9.1.5.2 ---------------------
> > Copyright (c) 1992-2004 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
> > 1993, 1994
> >         The Regents of the University of California. All 
> > rights reserved.
> > FreeBSD 5.3-STABLE #1: Mon Dec 27 10:27:38 EST 2004
> >     root@:/usr/obj/usr/src/sys/BarsMail1
> > ACPI APIC Table: <IntelR AWRDACPI>
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
> >   Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
> >   
> > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SE
> P,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SS
> E2,SS,HTT,TM,PBE>
> >   Hyperthreading: 2 logical CPUs
> > real memory  = 1072562176 (1022 MB)
> > avail memory = 1044226048 (995 MB)
> > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> >  cpu0 (BSP): APIC ID:  0
> >  cpu1 (AP): APIC ID:  1
> > ioapic0: Changing APIC ID to 4
> > ioapic0 <Version 2.0> irqs 0-23 on motherboard
> > ioapic1 <Version 2.0> irqs 24-47 on motherboard
> > npx0: [FAST]
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > acpi0: <IntelR AWRDACPI> on motherboard
> > acpi0: Power Button (fixed)
> > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> > cpu0: <ACPI CPU> on acpi0
> > cpu1: <ACPI CPU> on acpi0
> > acpi_button0: <Power Button> on acpi0
> > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> > pci0: <ACPI PCI bus> on pcib0
> > pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> > pci1: <ACPI PCI bus> on pcib1
> > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> 
> > port 0xa000-0xa01f mem 
> > 0xf1000000-0xf101ffff,0xf1020000-0xf103ffff irq 18 at device 
> > 1.0 on pci1
> > em0: Ethernet address: 00:11:2f:5a:7e:df
> > em0:  Speed:N/A  Duplex:N/A
> > pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
> > pci2: <ACPI PCI bus> on pcib2
> > 3ware device driver for 9000 series storage controllers, 
> > version: 2.50.00.000
> > twa0: <3ware 9000 series Storage Controller> port 
> > 0xb000-0xb0ff mem 0xf3000000-0xf37fffff,0xf3800000-0xf38000ff 
> > irq 27 at device 2.0 on pci2
> > twa0: [GIANT-LOCKED]
> > twa0: 8 ports, Firmware FE9X 2.04.00.005, BIOS BE9X 2.03.01.047
> > uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 
> > 16 at device 29.0 on pci0
> > uhci0: [GIANT-LOCKED]
> > usb0: <UHCI (generic) USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 
> > 19 at device 29.1 on pci0
> > uhci1: [GIANT-LOCKED]
> > usb1: <UHCI (generic) USB controller> on uhci1
> > usb1: USB revision 1.0
> > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub1: 2 ports with 2 removable, self powered
> > pci0: <base peripheral> at device 29.4 (no driver attached)
> > pci0: <base peripheral, interrupt controller> at device 29.5 
> > (no driver attached)
> > pci0: <serial bus, USB> at device 29.7 (no driver attached)
> > pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> > pci3: <ACPI PCI bus> on pcib3
> > pci3: <display, VGA> at device 4.0 (no driver attached)
> > em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> 
> > port 0xc400-0xc43f mem 
> > 0xf6020000-0xf603ffff,0xf6000000-0xf601ffff irq 16 at device 
> > 5.0 on pci3
> > em1: Ethernet address: 00:11:2f:5a:7e:e0
> > em1:  Speed:N/A  Duplex:N/A
> > isab0: <PCI-ISA bridge> at device 31.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel 6300ESB UDMA100 controller> port 
> > 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 
> > 31.1 on pci0
> > ata0: channel #0 on atapci0
> > ata1: channel #1 on atapci0
> > pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> > fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 
> > drq 2 on acpi0
> > fdc0: [FAST]
> > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 
> > flags 0x10 on acpi0
> > sio0: type 16550A
> > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
> > sio1: type 16550A
> > ppc0: <ECP parallel printer port> port 
> > 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
> > ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> > ppc0: FIFO with 16/16/9 bytes threshold
> > ppbus0: <Parallel port bus> on ppc0
> > lpt0: <Printer> on ppbus0
> > lpt0: Interrupt-driven port
> > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
> > atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > kbd0 at atkbd0
> > atkbd0: [GIANT-LOCKED]
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: [GIANT-LOCKED]
> > psm0: model IntelliMouse Explorer, device ID 4
> > orm0: <ISA Option ROMs> at iomem 
> > 0xc8000-0xc97ff,0xc0000-0xc7fff on isa0
> > pmtimer0 on isa0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 
> > 0xa0000-0xbffff on isa0
> > Timecounters tick every 1.000 msec
> > acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
> > da0 at twa0 bus 0 target 0 lun 0
> > da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device
> > da0: 100.000MB/s transfers
> > da0: 238408MB (488259584 512 byte sectors: 255H 63S/T 30392C)
> > da1 at twa0 bus 0 target 1 lun 0
> > da1: <3ware Logical Disk 01 1.00> Fixed Direct Access SCSI-0 device
> > da1: 100.000MB/s transfers
> > da1: 476816MB (976519168 512 byte sectors: 255H 63S/T 60785C)
> > SMP: AP CPU #1 Launched!
> > Mounting root from ufs:/dev/da0s1a
> > em0: Link is up 10 Mbps Full Duplex
> > em0: Link is Down
> > em0: Link is up 1000 Mbps Full Duplex
> > --------------------------------------------------------------
> > -------------------------------
> > 
> > Hope this information might help.
> > 
> > Thanks,
> > 
> > Kev
> > _______________________________________________
> > freebsd-stable at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> > To unsubscribe, send any mail to 
> > "freebsd-stable-unsubscribe at freebsd.org"
> > 
>

More information about the freebsd-stable mailing list