D-Link DGE-550SX support

[Steve Bernard]

The card uses a DL-2000 chipset. I found a patch that was intended to make
things work but, it doesn't work. I suppose that I'll have to check out the
Intel PRO/1000 MF or Netgear that you suggest.

Thanks,

Steve


-----Original Message-----
From: owner-freebsd-stable at freebsd.org
[mailto:owner-freebsd-stable at freebsd.org]On Behalf Of Peter Radcliffe
Sent: Wednesday, May 28, 2003 11:17 AM
To: FreeBSD-Stable Listserv
Subject: Re: D-Link DGE-550SX support


Steve Bernard <sbernard at gmu.edu> probably said:
> I found some ancillary information that seems to indicate that there is a
> driver that will allow a D-Link DGE-550SX Gigabit fiber NIC to work under
> FreeBSD 4.x. Can anyone confirm or refute this, or provide additional
> information?

Do you know what chipset it is ?

> If the NIC is not supported, is there a recommendation for a gigabit
> fiber NIC that works well under 4.8?

I've had good luck with Netgear GA620 cards, both fiber and copper.

P.

--
pir                pir-sig at pir.net                 pir-sig at net.tufts.edu

_______________________________________________
freebsd-stable at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"