Proliant on a 6500

Danny Carroll fbsd at dannysplace.net
Mon May 12 16:09:50 PDT 2003


Still more info...
It does not work on 5_0-RELEASE either.

-D
----- Original Message -----
From: "Danny Carroll" <fbsd at dannysplace.net>
To: <freebsd-smp at freebsd.org>; <freebsd-stable at freebsd.org>;
<freebsd-questions at freeBSD.org>
Cc: "Poul-Henning Kamp" <phk at phk.freebsd.dk>
Sent: Monday, May 12, 2003 11:13 PM
Subject: Re: Proliant on a 6500


> More info...
> I freshly installed to a drive on the internal SCSI bus...
>
> Then I copied the smp kernel over and booted off the new drive (with the
> array card still inserted).
> The machine detected the array card and started up just fine...
> As soon as I tried to mount a logical drive the command froze.    I was
able
> to CTRL-C but it would not talk to the ida logical drives.
>
> This proves to me that it's an IDA thing...
>
> Now I'll cvsup to -STABLE and see if that makes a difference.
> After that I will try -CURRENT.
>
> Does anyone on the SMP lists (or Poul) want anything out of this machine
> (traces or whatever?)
>
> -D
>
>
> ----- Original Message -----
> From: "Danny Carroll" <fbsd at dannysplace.net>
> To: <freebsd-smp at freebsd.org>; <freebsd-stable at freebsd.org>;
> <freebsd-questions at freeBSD.org>
> Sent: Monday, May 12, 2003 9:24 PM
> Subject: Re: Proliant on a 6500
>
>
> > Sorry to reply to myself, but I wanted to expand this to -stable and add
> > some more info...
> > See the original post at the bottom of this msg.
> >
> > I just took the Smart 2/P and put it in slot1 (one of the shared
Eisa/PCI
> > slots.)
> >
> > Now the Dmesg output shows the "SMP: AP CPU" lines in a different
order...
> >
> > They were:
> > SMP: AP CPU# 3 Launched!
> > SMP: AP CPU# 1 Launched!
> > SMP: AP CPU# 2 Launched!
> >
> > now they are:
> > SMP: AP CPU# 1 Launched!
> > SMP: AP CPU# 2 Launched!
> > SMP: AP CPU# 3 Launched!
> >
> > I don't think this is a SMP problem, but rather a SMP/Smart2 combined
> > problem...
> >
> > Has anyone got FreeBSD 4.8-RELEASE working on a Compaq Proliant 6500
with
> a
> > Smart2/p?
> > -D
> >
> > ----- Original Message -----
> > From: "Danny Carroll" <fbsd at dannysplace.net>
> > To: <freebsd-smp at freebsd.org>
> > Sent: Monday, May 12, 2003 6:29 PM
> > Subject: Proliant on a 6500
> >
> >
> > > Hiya all...
> > >
> > > I have a compaq proliant 6500 with 4 cpu's
> > > I am trying to install 4.8 on it (I got it installed but it's SMP that
> > does
> > > not work).
> > >
> > > The kernel seems to hang after the SMP: AP CPU #3 Launched.
> > > Actually it gets two lines extra (mounting root off the ida
controller).
> > >
> > > Now, scrolllock and caps and everything still work, (I can even sroll
> back
> > > and read the text) but nothing else happens.
> > >
> > > I am about to wipe and choose UNIXWare 7 (I chose solaris last time)
and
> > > we'll see what happens, but I was wondering if you have seen this
> problem
> > > before.
> > >
> > > One more thing...  I only had the first two SMP settings in the kernel
I
> > had
> > > none of that NCPU etc stuff,...  Do I need it for 4.8?  If so, how do
I
> > find
> > > out how many interupts to set??
> > >
> > > Any more tips??
> > >
> > > Thanks...
> > > -D
> > >
> >
> > _______________________________________________
> > freebsd-questions at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to
> "freebsd-questions-unsubscribe at freebsd.org"
> >
> >
>
> _______________________________________________
> freebsd-stable at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to "freebsd-stable-unsubscribe at freebsd.org"
>
>



More information about the freebsd-stable mailing list