Ultra 450 supported?

Fri Feb 9 23:12:58 UTC 2007

I was hunting around for some dmesgs, and I came across this one in
NYCBUG's dmesgd:

FreeBSD 5.4-RC3 Sun Ultra 450
http://www.nycbug.org/?NAV=dmesgd;f_dmesg=FreeBSD;f_bsd=;f_nick=;f_descr=sun;dmesgid=1667#1667

I'd never heard of an Ultra 450 before.  It appears to be a
workstation-ish cousin to an E450:

http://sunsolve.sun.com/handbook_pub/Systems/U450/U450.html

I see only one mention of one anywhere in the archives -- from Joerg,
back in 2004:

http://lists.freebsd.org/pipermail/freebsd-sparc64/2004-April/001531.html

That thread didn't definitively demonstrative that sparc64 was working
properly on this system.  Can anyone speak to its current
supportability, with an eye towards adding it to the project page?

Royce

-- 
Royce D. Williams                                - IP Engineering, ACS
personal: [first]@alaska.net                  - PGP: 3FC087DB/1776A531
work: [first.last]@acsalaska.net         - http://www.tycho.org/royce/
"Don't find fault, find a remedy; anybody can complain."  - Henry Ford
-------------- next part --------------
# NYCbug dmesgd: dmesg  	20050425  	FreeBSD  	firebaugh  	FreeBSD 5.4-RC3 Sun Ultra450
stray vector interrupt 2029
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #0: Sun Apr 17 22:09:27 UTC 2005
    xxx at xxx.xxx:/usr/obj/usr/src/sys/GENERIC
real memory  = 1073741824 (1024 MB)
avail memory = 1035132928 (987 MB)
cpu0: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu1: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu2: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
cpu3: Sun Microsystems UltraSparc-II Processor (296.00 MHz CPU)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
nexus0: <Open Firmware Nexus device>
nexus0: <associations>, type (unknown) (no driver attached)
pcib0: <U2P UPA-PCI bridge> on nexus0
pcib0: Psycho, impl 0, version 4, ign 0x7c0, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib0 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci0: <OFW PCI bus> on pcib0
ebus0: <PCI-EBus2 bridge> mem 0x71000000-0x717fffff,0x70000000-0x70ffffff at device 1.0 on pci0
auxio0: <Sun Auxiliary I/O> addr 0x140072f000-0x140072f003,0x140072c000-0x140072c003,0x140072a000-0x140072a003,0x1400728000-0x1400728003,0x1400726000-0x1400726003 on ebus0
ebus0: <power> addr 0x1400724000-0x1400724003 irq 2034,2021 (no driver attached)
ebus0: <SUNW,pll> addr 0x1400504000-0x1400504002 (no driver attached)
ebus0: <sc> addr 0x1400500000-0x1400500007 (no driver attached)
puc0: <Siemens SAB 82532 dual channel SCC> addr 0x1400400000-0x140040007f irq 43 on ebus0
uart0: <SAB 82532 v3.2, channel A> on puc0
uart0: CTS oflow
uart0: console (9600,n,8,1)
uart1: <SAB 82532 v3.2, channel B> on puc0
uart1: CTS oflow
uart2: <16550 or compatible> addr 0x14003083f8-0x14003083ff irq 41 on ebus0
uart3: <16550 or compatible> addr 0x14003062f8-0x14003062ff irq 42 on ebus0
ebus0: <ecpp> addr 0x1400700000-0x140070000f,0x1400300398-0x1400300399,0x14003043bc-0x14003043cb irq 2018 (no driver attached)
ebus0: <fdthree> addr 0x1400720000-0x1400720003,0x1400706000-0x140070600f,0x14003023f0-0x14003023f7 irq 2023 (no driver attached)
eeprom0: <EEPROM/clock> addr 0x1400000000-0x1400001fff on ebus0
eeprom0: model mk48t59
eeprom0: hostid 809604d2
ebus0: <flashprom> addr 0x1000000000-0x10000fffff,0x1000000000-0x10000fffff (no driver attached)
ebus0: <SUNW,envctrl> addr 0x1400600000-0x1400600003 irq 2021,2024 (no driver attached)
ebus0: <SUNW,CS4231> addr 0x1400722000-0x1400722003,0x1400704000-0x140070400f,0x1400702000-0x140070200f,0x1400200000-0x14002000ff irq 2020,2019 (no driver attached)
hme0: <Sun HME 10/100 Ethernet> mem 0x8000-0xffff at device 1.1 on pci0
miibus0: <MII bus> on hme0
nsphy0: <DP83840 10/100 media interface> on miibus0
nsphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme0: Ethernet address: xx:xx:xx:xx:xx:xx
sym0: <875> port 0x400-0x4ff mem 0x12000-0x12fff,0x10000-0x100ff at device 3.0 on pci0
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym1: <875> port 0x800-0x8ff mem 0x16000-0x16fff,0x14000-0x140ff at device 2.0 on pci0
sym1: No NVRAM, ID 7, Fast-20, SE, parity checking
pcib1: <U2P UPA-PCI bridge> on nexus0
pcib1: Psycho, impl 0, version 4, ign 0x7c0, bus A
pci1: <OFW PCI bus> on pcib1
nexus0: <mc>, type memory-controller (no driver attached)
nexus0: <SUNW,afb>, type display (no driver attached)
pcib2: <U2P UPA-PCI bridge> on nexus0
pcib2: Psycho, impl 0, version 4, ign 0x100, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib2 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci2: <OFW PCI bus> on pcib2
pcib3: <OFW PCI-PCI bridge> at device 4.0 on pci2
pci3: <OFW PCI bus> on pcib3
pci3: <bridge> at device 0.0 (no driver attached)
hme1: <Sun HME 10/100 Ethernet> mem 0x4000000-0x4007fff at device 0.1 on pci3
pcib2: guessing interrupt 25 for device 4/0 pin 2
miibus1: <MII bus> on hme1
nsphy1: <DP83840 10/100 media interface> on miibus1
nsphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
hme1: Ethernet address: xx:xx:xx:xx:xx:xx
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0x1000-0x10ff mem 0x4008000-0x4008fff at device 4.0 on pci3
pcib2: guessing interrupt 24 for device 4/0 pin 1
isp0: invalid NVRAM header
pcib4: <U2P UPA-PCI bridge> on nexus0
pcib4: Psycho, impl 0, version 4, ign 0x100, bus A
pci4: <OFW PCI bus> on pcib4
pcib5: <U2P UPA-PCI bridge> on nexus0
pcib5: Psycho, impl 0, version 4, ign 0x180, bus B
initializing counter-timer
Timecounter "counter-timer" frequency 1000000 Hz quality 100
pcib5 dvma: DVMA map: 0xfc000000 to 0xffffffff
pci5: <OFW PCI bus> on pcib5
pcib6: <U2P UPA-PCI bridge> on nexus0
pcib6: Psycho, impl 0, version 4, ign 0x180, bus A
pci6: <OFW PCI bus> on pcib6
Timecounters tick every 10.000 msec
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
da0 at sym0 bus 0 target 0 lun 0
da0: <FUJITSU MAB3091S SUN9.0G 1705> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da0: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
da1 at sym0 bus 0 target 1 lun 0
da1: <FUJITSU MAB3091S SUN9.0G 1705> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: 8637MB (17689267 512 byte sectors: 255H 63S/T 1101C)
cd0 at sym1 bus 0 target 6 lun 0
cd0: <TOSHIBA XM5701TASUN12XCD 2395> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/da0a