Fail to install 5.3 on Netra t1

[kinux]

It seems not work, i use the disc2 and miniinst to install, all failure with
following error.

Boot device: disk:a File and args: kernel/unix

ok boot cdrom /boot/kernel/kernel
Boot device: /pci at 1f,0/pci at 1/pci at 1/ide at e/cdrom at 2:f File and args:
/boot/kernel/kernel

>> FreeBSD/sparc64 boot block
Boot path: /pci at 1f,0/pci at 1/pci at 1/ide at e/cdrom at 2,0:f
Boot loader: /boot/kernel/kernel
File /boot/kernel/kernel not found
Program terminated
ok


----- Original Message ----- 
From: "Ken Smith" <kensmith at cse.Buffalo.EDU>
To: "kinux" <kinux at hknet.com>
Cc: <freebsd-sparc64 at freebsd.org>
Sent: Thursday, September 16, 2004 9:59 PM
Subject: Re: Fail to install 5.3 on Netra t1


> On Thu, Sep 16, 2004 at 04:10:45PM +0800, kinux wrote:
>
> > Executing last command: boot cdrom
> > Boot device: /pci at 1f,0/pci at 1/pci at 1/ide at e/cdrom at 2:f  File and args:
> > kernel/unix
> >
> > >> FreeBSD/sparc64 boot block
> >    Boot path:   /pci at 1f,0/pci at 1/pci at 1/ide at e/cdrom at 2,0:f
> >    Boot loader: kernel/unix
> > File kernel/unix not found
> > Program terminated
> > ok
>
> BTW, it is most likely the "File and args: kernel/unix" thing that is
> causing your specific problem and that's probably a setting in your
> EEPROM.  If you have the same problem booting miniinst as you had
> booting the bootonly CD then try:
>
> boot cdrom /boot/kernel/kernel
>
> to see if that helps.  If it does you should probably change your EEPROM
> settings.
>
> -- 
> Ken Smith
> - From there to here, from here to      |       kensmith at cse.buffalo.edu
>   there, funny things are everywhere.   |
>                       - Theodore Geisel |
>