Fujitsu Siemens TX600 S3 performance issue

Mon Feb 5 21:50:41 UTC 2007

On Friday 02 February 2007 13:31, Ludger Bolmerg wrote:
> Hi
> 
> I installed FreeBSD 6.2 on a Fujitsu Siemens TX600 S3 with 2 dual core 
> Xeon processors and 4G RAM.
> 
> The SMP kernel is awfully slow.  make buildkernel takes about 6 hours to 
> complete.  When I boot a UP kernel the build completes within 12 
> minutes.  I don't see any unusual message in any log file.

Can you run top and see what the system is doing?  That sounds very odd.  If 
you boot the SMP kernel with 'kern.smp.disabled=1' set via the loader is it 
still really slow?

> I have attached dmesg.boot.  Has anybody encountered similar issues.
> Any help is highly appreciated.
> 
> Thanks
> Ludger
> 
> 
> Copyright (c) 1992-2007 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
>      root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3398.31-MHz 686-class CPU)
>    Origin = "GenuineIntel"  Id = 0xf68  Stepping = 8
>  
> 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  
> Features2=0xe5bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,CNTX-ID,CX16,<b14>,<b15>>
>    AMD Features=0x20100000<NX,LM>
>    AMD Features2=0x1<LAHF>
>    Cores per package: 2
>    Logical CPUs per core: 2
> real memory  = 3216482304 (3067 MB)
> avail memory = 3144847360 (2999 MB)
> ACPI APIC Table: <_FSC_  TIANO  >
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
>   cpu0 (BSP): APIC ID:  8
>   cpu1 (AP): APIC ID: 10
>   cpu2 (AP): APIC ID: 12
>   cpu3 (AP): APIC ID: 14
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> ioapic3 <Version 2.0> irqs 72-95 on motherboard
> ioapic4 <Version 2.0> irqs 96-119 on motherboard
> lapic8: Forcing LINT1 to edge trigger
> kbd1 at kbdmux0
> ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <_FSC_ TIANO  > on motherboard
> acpi0: Power Button (fixed)
> unknown: memory range not supported
> unknown: memory range not supported
> unknown: memory range not supported
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x10> port 0xca6,0xca7 on acpi0
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 
> 
0xa0000-0xbffff,0xc0000000-0xcfffffff,0xffc00000-0xffdfffff,0xffe00000-0xffffffff 
> on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci3: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci5: <ACPI PCI bus> on pcib3
> pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci6: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci8: <ACPI PCI bus> on pcib5
> pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
> pci10: <ACPI PCI bus> on pcib6
> pcib7: <ACPI PCI-PCI bridge> mem 0xde100000-0xde100fff irq 47 at device 
> 0.0 on pci10
> pci11: <ACPI PCI bus> on pcib7
> pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci10
> pci12: <ACPI PCI bus> on pcib8
> bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xde000000-0xde00ffff 
> irq 48 at device 2.0 on pci12
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
> brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:0e:0c:43:3c:25
> bge1: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xde010000-0xde01ffff 
> irq 49 at device 2.1 on pci12
> miibus1: <MII bus> on bge1
> brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
> brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
> 1000baseTX-FDX, auto
> bge1: Ethernet address: 00:0e:0c:43:3c:26
> pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0
> pci14: <ACPI PCI bus> on pcib9
> pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci14
> pci15: <ACPI PCI bus> on pcib10
> amr0: <LSILogic MegaRAID 1.53> mem 
> 0xe3000000-0xe300ffff,0xe3200000-0xe323ffff irq 86 at device 14.0 on pci15
> amr0: <LSILogic MegaRAID SCSI 320-2E> Firmware 516G, BIOS H430, 256MB RAM
> pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci14
> pci16: <ACPI PCI bus> on pcib11
> pci0: <memory, RAM> at device 9.0 (no driver attached)
> pci0: <memory, RAM> at device 9.1 (no driver attached)
> pci0: <memory, RAM> at device 9.2 (no driver attached)
> pci0: <memory, RAM> at device 9.3 (no driver attached)
> pci0: <memory, RAM> at device 9.4 (no driver attached)
> pci0: <memory, RAM> at device 9.5 (no driver attached)
> pci0: <memory, RAM> at device 9.6 (no driver attached)
> pci0: <memory, RAM> at device 9.7 (no driver attached)
> pci0: <memory, RAM> at device 11.0 (no driver attached)
> pci0: <memory, RAM> at device 11.1 (no driver attached)
> pci0: <memory, RAM> at device 11.2 (no driver attached)
> pci0: <memory, RAM> at device 11.3 (no driver attached)
> pci0: <memory, RAM> at device 11.4 (no driver attached)
> pci0: <memory, RAM> at device 11.5 (no driver attached)
> pci0: <memory, RAM> at device 11.6 (no driver attached)
> pci0: <memory, RAM> at device 11.7 (no driver attached)
> pci0: <memory, RAM> at device 13.0 (no driver attached)
> pci0: <memory, RAM> at device 13.1 (no driver attached)
> pci0: <memory, RAM> at device 13.2 (no driver attached)
> pci0: <memory, RAM> at device 13.3 (no driver attached)
> pci0: <memory, RAM> at device 13.4 (no driver attached)
> pci0: <memory, RAM> at device 13.5 (no driver attached)
> pci0: <memory, RAM> at device 13.6 (no driver attached)
> pci0: <memory, RAM> at device 13.7 (no driver attached)
> pci0: <memory, RAM> at device 15.0 (no driver attached)
> pci0: <memory, RAM> at device 15.1 (no driver attached)
> pci0: <memory, RAM> at device 15.2 (no driver attached)
> pci0: <memory, RAM> at device 15.3 (no driver attached)
> pci0: <memory, RAM> at device 15.4 (no driver attached)
> pci0: <memory, RAM> at device 15.5 (no driver attached)
> pci0: <memory, RAM> at device 15.6 (no driver attached)
> pci0: <memory, RAM> at device 15.7 (no driver attached)
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x8060-0x807f 
> irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x8040-0x805f 
> irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x8020-0x803f 
> irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 
> 0xe3400000-0xe34003ff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> uhub4: vendor 0x2404 product 0x00a7, class 9/0, rev 2.00/0.00, addr 2
> uhub4: multiple transaction translators
> usb3: device addr 2 (config 1) exceeds power budget, 510 mA > 500 mA
> device_attach: uhub4 attach returned 6
> usb3: device addr 2 (config 1) exceeds power budget, 510 mA > 500 mA
> uhub3: port 3, set config at addr 2 failed
> uhub3: device problem (NO_POWER), disabling port 3
> pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci17: <ACPI PCI bus> on pcib12
> pci17: <display, VGA> at device 0.0 (no driver attached)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 SATA150 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f irq 18 at device 31.2 
> on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on 
> acpi0
> sio0: type 16550A
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 
> on isa0
> fdc0: [FAST]
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ukbd0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1
> kbd2 at ukbd0
> ums0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1
> ums0: 5 buttons and Z dir.
> Timecounters tick every 1.000 msec
> acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.00> at ata0-master UDMA33
> amrd0: <LSILogic MegaRAID logical drive> on amr0
> amrd0: 139800MB (286310400 sectors) RAID 1 (optimal)
> amrd1: <LSILogic MegaRAID logical drive> on amr0
> amrd1: 139800MB (286310400 sectors) RAID 1 (optimal)
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #3 Launched!
> Trying to mount root from ufs:/dev/amrd1s1a
> _______________________________________________
> freebsd-smp at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-smp
> To unsubscribe, send any mail to "freebsd-smp-unsubscribe at freebsd.org"
> 

-- 
John Baldwin