Fujitsu Siemens TX600 S3 performance issue

Ludger Bolmerg lbolmerg at web.de
Fri Feb 2 19:02:39 UTC 2007


Hi

I installed FreeBSD 6.2 on a Fujitsu Siemens TX600 S3 with 2 dual core 
Xeon processors and 4G RAM.

The SMP kernel is awfully slow.  make buildkernel takes about 6 hours to 
complete.  When I boot a UP kernel the build completes within 12 
minutes.  I don't see any unusual message in any log file.

I have attached dmesg.boot.  Has anybody encountered similar issues.
Any help is highly appreciated.

Thanks
Ludger


Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007
     root at dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3398.31-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf68  Stepping = 8
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 
Features2=0xe5bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,CNTX-ID,CX16,<b14>,<b15>>
   AMD Features=0x20100000<NX,LM>
   AMD Features2=0x1<LAHF>
   Cores per package: 2
   Logical CPUs per core: 2
real memory  = 3216482304 (3067 MB)
avail memory = 3144847360 (2999 MB)
ACPI APIC Table: <_FSC_  TIANO  >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  8
  cpu1 (AP): APIC ID: 10
  cpu2 (AP): APIC ID: 12
  cpu3 (AP): APIC ID: 14
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
ioapic3 <Version 2.0> irqs 72-95 on motherboard
ioapic4 <Version 2.0> irqs 96-119 on motherboard
lapic8: Forcing LINT1 to edge trigger
kbd1 at kbdmux0
ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <_FSC_ TIANO  > on motherboard
acpi0: Power Button (fixed)
unknown: memory range not supported
unknown: memory range not supported
unknown: memory range not supported
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x10> port 0xca6,0xca7 on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 
0xa0000-0xbffff,0xc0000000-0xcfffffff,0xffc00000-0xffdfffff,0xffe00000-0xffffffff 
on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci5: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci6: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci8: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci10: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> mem 0xde100000-0xde100fff irq 47 at device 
0.0 on pci10
pci11: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 0.2 on pci10
pci12: <ACPI PCI bus> on pcib8
bge0: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xde000000-0xde00ffff 
irq 48 at device 2.0 on pci12
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge0: Ethernet address: 00:0e:0c:43:3c:25
bge1: <Broadcom BCM5704 B0, ASIC rev. 0x2100> mem 0xde010000-0xde01ffff 
irq 49 at device 2.1 on pci12
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 
1000baseTX-FDX, auto
bge1: Ethernet address: 00:0e:0c:43:3c:26
pcib9: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci14: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci14
pci15: <ACPI PCI bus> on pcib10
amr0: <LSILogic MegaRAID 1.53> mem 
0xe3000000-0xe300ffff,0xe3200000-0xe323ffff irq 86 at device 14.0 on pci15
amr0: <LSILogic MegaRAID SCSI 320-2E> Firmware 516G, BIOS H430, 256MB RAM
pcib11: <ACPI PCI-PCI bridge> at device 0.2 on pci14
pci16: <ACPI PCI bus> on pcib11
pci0: <memory, RAM> at device 9.0 (no driver attached)
pci0: <memory, RAM> at device 9.1 (no driver attached)
pci0: <memory, RAM> at device 9.2 (no driver attached)
pci0: <memory, RAM> at device 9.3 (no driver attached)
pci0: <memory, RAM> at device 9.4 (no driver attached)
pci0: <memory, RAM> at device 9.5 (no driver attached)
pci0: <memory, RAM> at device 9.6 (no driver attached)
pci0: <memory, RAM> at device 9.7 (no driver attached)
pci0: <memory, RAM> at device 11.0 (no driver attached)
pci0: <memory, RAM> at device 11.1 (no driver attached)
pci0: <memory, RAM> at device 11.2 (no driver attached)
pci0: <memory, RAM> at device 11.3 (no driver attached)
pci0: <memory, RAM> at device 11.4 (no driver attached)
pci0: <memory, RAM> at device 11.5 (no driver attached)
pci0: <memory, RAM> at device 11.6 (no driver attached)
pci0: <memory, RAM> at device 11.7 (no driver attached)
pci0: <memory, RAM> at device 13.0 (no driver attached)
pci0: <memory, RAM> at device 13.1 (no driver attached)
pci0: <memory, RAM> at device 13.2 (no driver attached)
pci0: <memory, RAM> at device 13.3 (no driver attached)
pci0: <memory, RAM> at device 13.4 (no driver attached)
pci0: <memory, RAM> at device 13.5 (no driver attached)
pci0: <memory, RAM> at device 13.6 (no driver attached)
pci0: <memory, RAM> at device 13.7 (no driver attached)
pci0: <memory, RAM> at device 15.0 (no driver attached)
pci0: <memory, RAM> at device 15.1 (no driver attached)
pci0: <memory, RAM> at device 15.2 (no driver attached)
pci0: <memory, RAM> at device 15.3 (no driver attached)
pci0: <memory, RAM> at device 15.4 (no driver attached)
pci0: <memory, RAM> at device 15.5 (no driver attached)
pci0: <memory, RAM> at device 15.6 (no driver attached)
pci0: <memory, RAM> at device 15.7 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x8060-0x807f 
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x8040-0x805f 
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x8020-0x803f 
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 
0xe3400000-0xe34003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
uhub4: vendor 0x2404 product 0x00a7, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
usb3: device addr 2 (config 1) exceeds power budget, 510 mA > 500 mA
device_attach: uhub4 attach returned 6
usb3: device addr 2 (config 1) exceeds power budget, 510 mA > 500 mA
uhub3: port 3, set config at addr 2 failed
uhub3: device problem (NO_POWER), disabling port 3
pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci17: <ACPI PCI bus> on pcib12
pci17: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 SATA150 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8080-0x808f irq 18 at device 31.2 
on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on 
acpi0
sio0: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcafff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 
on isa0
fdc0: [FAST]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ukbd0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Avocent USB DSRIQ, rev 1.10/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounters tick every 1.000 msec
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4244N/1.00> at ata0-master UDMA33
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 139800MB (286310400 sectors) RAID 1 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 139800MB (286310400 sectors) RAID 1 (optimal)
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Trying to mount root from ufs:/dev/amrd1s1a


More information about the freebsd-smp mailing list