FreeBSD desktop "best-fit" Dell platform suggestions?
freebsd at edvax.de
Wed Apr 3 06:03:17 UTC 2019
On Tue, 2 Apr 2019 14:24:39 -0700, David Christensen wrote:
> 1. The D945GTP workstation does not seem to support booting from a USB
> flash drive partitioned with GPT. It does boot from a SATA SSD
> partitioned with MBR. (I seem to recall that it booted from a USB flash
> drive formatted with MBR.) Once booted, I installed and/or updated the
> xorg and xfce packages. Both X and Xfce work, but maximum graphics
> resolution seems to be 1600x1200 (monitor is 1920x1080 and this computer
> can do that with Debian).
You can try to use a xorg.conf or an entry in xorg.conf.d/ to
force a specific screen size that matches the actual physical
screen size of the display, if the autodetect magic does not
work properly. Use xrandr to experiment within an X session.
> 2. The Inspiron laptop boots the GPT USB flash drive. Both X and Xfce
> work. Maximum graphics resolution seems to be 1024x768 (screen is
> 1280x800 and this computer can do that with Debian).
> The Fn+F8
> (CRT/LCD) hotkey combination switches video between either the screen or
> the VGA port (also 1024x768 maximum), but does not drive (mirror) both
This is intended. Older systems often allowed a "3 steps switching"
where you could cycle through LCD / LCD+CRT / CRT. Of course there
are problems when screen size and aspect ratio are different for
LCD and CRT (which isn't a CRT anymore, instead if'ts another LCD
with usually different parameters).
There is also often a "priority selector" that selects one of the
tree (or two) modes mentioned, depending on an external display
being connected or not.
Happy FreeBSD user since 4.0
Andra moi ennepe, Mousa, ...
More information about the freebsd-questions