Can't burn with ahci(4) and cdrecord

[Alexander Best]

On Thu Feb  3 11, David Demelier wrote:
> Hello,
> 
> I tried to burn a little iso with ahci(4) instead of old ata drivers and 
> it fails to burn with :

i have similar issues. for me using "-tao" solved the error.

cheers.
alex

> 
> markand at Melon ~ $ sudo cdrecord downloads/ubuntu-10.10-desktop-i386.iso
> cdrecord: No write mode specified.
> cdrecord: Assuming -sao mode.
> cdrecord: If your drive does not accept -sao, try -tao.
> cdrecord: Future versions of cdrecord may have different drive dependent 
> defaults.
> Cdrecord-ProDVD-ProBD-Clone 3.00 (amd64-unknown-freebsd8.2) Copyright 
> (C) 1995-2010 Jörg Schilling
> Using libscg version 'schily-0.9'.
> No target specified, trying to find one...
> Using dev=1,0,0.
> Device type    : Removable CD-ROM
> Version        : 0
> Response Format: 2
> Capabilities   :
> Vendor_info    : 'hp      '
> Identifikation : 'DVDRAM GT20L    '
> Revision       : 'DC05'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
> Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
> Driver flags   : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P 
> RAW/R96R LAYER_JUMP
> Starting to write CD/DVD/BD at speed 24 in real SAO mode for single session.
> Last chance to quit, starting real write    0 seconds. Operation starts.
> Turning BURN-Free off
> cdrecord: WARNING: Drive returns wrong startsec (0) using -150
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 FF FF FF 6A 00 00 20 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 65536
> cmd finished after 13.147s timeout 200s
> write track pad data: error after 0 bytes
> BFree: 597 K BSize: 597 K
> cdrecord: Input/output error. write_g1: scsi sendcmd: retryable error
> CDB:  2A 00 00 00 00 00 00 00 20 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0xFFFFFFFF [], Segment 0
> Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
> Sense flags: Blk 0 (not valid)
> resid: 65536
> cmd finished after 0.001s timeout 200s
> write track data: error after 0 bytes
> cdrecord: A write error occured.
> cdrecord: Please properly read the error message above.
> 
> This is happening on my HP Probook 4510s with 8.2-RC2 amd64.
> 
> -- 
> David Demelier

-- 
a13x