mouse problems....
dan p
glimp at live.com
Mon Oct 11 17:29:11 UTC 2010
> Date: Mon, 11 Oct 2010 09:41:52 -0700
> From: kline at thought.org
> To: freebsd-questions at freebsd.org
> Subject: Re: mouse problems....
>
> On Sun, Oct 10, 2010 at 08:26:45PM -0700, Gary Kline wrote:
> > I'm lost. Aday ago when I rebooted my old Dell, the mouse wouldn't
> > work. A hour ago I got X booting on my server, but the same thing:
> > no mouse. I see the cursor, but it is frozen. The only place my
> > mouse works is on my linux system. The KVM connections seem soild;
> > the only problem is the mouse. The brand is "Logitech" but it is
> > a PS/2 mouse.
> >
> >
> > I have tried the sysinstall utility; nothing. Would completely
> > rebuilding the kernels and worlds do any good? Any other ideas?
> >
>
>
> Here is more from dmesg on my server. startx brings up three
> twm xterms and a tiny xclock in the upper right corner, but the
> mouse cursor is frozen. The KVM unit is a Belkin SOHO, if that
> means anything. The KVM box is balanced on the edge of a small
> platic table; my 20" widescreen display is jury-rigged behind
> and balanced on surplus plastic. I can't do much of anything
> because I can't tell where the mouse is plugged i to the KVM
> unit.
>
> I'm including the dmesg output from the server. Is there a
> mouse driver I can compile that will get the mouse working on my
> two FreeBSD platforms? [Right now, things only work on my
> Ubuntu desktop. ... ]
>
> thanks for any help.
>
> gary
>
> Enc: dmesg fron ethic
>
>
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.2-RELEASE-p4 #2: Sat Nov 21 05:52:04 PST 2009
> root at ethic.thought.org:/usr/obj/usr/src/sys/ETHIC
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz (2793.01-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x1067a Stepping = 10
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Features2=0x408e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
> AMD Features=0x20100000<NX,LM>
> AMD Features2=0x1<LAHF>
> Cores per package: 2
> real memory = 3478716416 (3317 MB)
> avail memory = 3399180288 (3241 MB)
> ACPI APIC Table: <DELL FX09 >
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
> cpu0 (BSP): APIC ID: 0
> cpu1 (AP): APIC ID: 1
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <DELL FX09 > on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, cf490000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> device_attach: acpi_hpet0 attach returned 12
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <PCI-PCI bridge> irq 16 at device 1.0 on pci0
> pci1: <PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xff00-0xff07 mem 0xfdf00000-0xfdf7ffff,0xd0000000-0xdfffffff,0xfdb00000-0xfdbfffff irq 16 at device 2.0 on pci0
> agp0: <Intel G33 SVGA controller> on vgapci0
> agp0: detected 7164k stolen memory
> agp0: aperture size is 256M
> em0: <Intel(R) PRO/1000 Network Connection 6.9.6> port 0xfe00-0xfe1f mem 0xfdfc0000-0xfdfdffff,0xfdfff000-0xfdffffff irq 20 at device 25.0 on pci0
> em0: Using MSI interrupt
> em0: [FILTER]
> em0: Ethernet address: 00:24:e8:17:88:61
> uhci0: <UHCI (generic) USB controller> port 0xfd00-0xfd1f irq 16 at device 26.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <UHCI (generic) USB controller> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <UHCI (generic) USB controller> port 0xfc00-0xfc1f irq 21 at device 26.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <UHCI (generic) USB controller> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <UHCI (generic) USB controller> port 0xfb00-0xfb1f irq 19 at device 26.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <UHCI (generic) USB controller> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfdffe000-0xfdffe3ff irq 18 at device 26.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <EHCI (generic) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
> uhub3: 6 ports with 6 removable, self powered
> uhub4: <vendor 0x05e3 USB2.0 Hub, class 9/0, rev 2.00/77.60, addr 2> on uhub3
> uhub4: single transaction translator
> uhub4: 4 ports with 4 removable, self powered
> ukbd0: <No brand Combo Free KVM, class 0/0, rev 1.10/0.00, addr 3> on uhub4
> kbd2 at ukbd0
> uhid0: <No brand Combo Free KVM, class 0/0, rev 1.10/0.00, addr 3> on uhub4
> pci0: <multimedia, HDA> at device 27.0 (no driver attached)
> uhci3: <UHCI (generic) USB controller> port 0xfa00-0xfa1f irq 23 at device 29.0 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb4: <UHCI (generic) USB controller> on uhci3
> usb4: USB revision 1.0
> uhub5: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub5: 2 ports with 2 removable, self powered
> uhci4: <UHCI (generic) USB controller> port 0xf900-0xf91f irq 19 at device 29.1 on pci0
> uhci4: [GIANT-LOCKED]
> uhci4: [ITHREAD]
> usb5: <UHCI (generic) USB controller> on uhci4
> usb5: USB revision 1.0
> uhub6: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb5
> uhub6: 2 ports with 2 removable, self powered
> uhci5: <UHCI (generic) USB controller> port 0xf800-0xf81f irq 18 at device 29.2 on pci0
> uhci5: [GIANT-LOCKED]
> uhci5: [ITHREAD]
> usb6: <UHCI (generic) USB controller> on uhci5
> usb6: USB revision 1.0
> uhub7: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb6
> uhub7: 2 ports with 2 removable, self powered
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xfdffd000-0xfdffd3ff irq 23 at device 29.7 on pci0
> ehci1: [GIANT-LOCKED]
> ehci1: [ITHREAD]
> usb7: EHCI version 1.0
> usb7: companion controllers, 2 ports each: usb4 usb5 usb6
> usb7: <EHCI (generic) USB 2.0 controller> on ehci1
> usb7: USB revision 2.0
> uhub8: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb7
> uhub8: 6 ports with 6 removable, self powered
> umass0: <TEAC CA-200, class 0/0, rev 2.00/4.08, addr 2> on uhub8
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port 0xde00-0xdeff mem 0xfddff000-0xfddff0ff irq 16 at device 1.0 on pci2
> re0: Chip rev. 0x00800000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> re0: Ethernet address: 00:08:54:d8:4a:99
> re0: [FILTER]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH9 SATA300 controller> port 0xf700-0xf707,0xf600-0xf603,0xf500-0xf507,0xf400-0xf403,0xf300-0xf30f,0xf200-0xf20f irq 19 at device 31.2 on pci0
> atapci0: [ITHREAD]
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> atapci1: <Intel ICH9 SATA300 controller> port 0xf000-0xf007,0xef00-0xef03,0xee00-0xee07,0xed00-0xed03,0xec00-0xec0f,0xeb00-0xeb0f irq 19 at device 31.5 on pci0
> atapci1: [ITHREAD]
> ata4: <ATA channel 0> on atapci1
> ata4: [ITHREAD]
> ata5: <ATA channel 1> on atapci1
> ata5: [ITHREAD]
> acpi_tz0: <Thermal Zone> on acpi0
> speaker0: <PC speaker> port 0x61 on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 6164a2306004a23
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 6164a2306004a23
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
> device_attach: acpi_hpet0 attach returned 12
> pmtimer0 on isa0
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: [ITHREAD]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: [ITHREAD]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> ppc0: parallel port not found.
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 8250 or not responding
> sio0: [FILTER]
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> ad4: 476940MB <Hitachi HDP725050GLA360 GM4OA5BA> at ata2-master SATA300
> GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3.
> GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67.
> GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20.
> acd0: DVDR <Optiarc DVD+/-RW AD-7200S/102A> at ata3-master SATA150
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
> (probe0:ata3:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:ata3:0:0:0): CAM Status: SCSI Status Error
> (probe0:ata3:0:0:0): SCSI Status: Check Condition
> (probe0:ata3:0:0:0): NOT READY asc:3a,1
> (probe0:ata3:0:0:0): Medium not present - tray closed
> (probe0:ata3:0:0:0): Unretryable error
> (probe1:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe1:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe1:umass-sim0:0:0:0): NOT READY asc:3a,0
> (probe1:umass-sim0:0:0:0): Medium not present
> (probe1:umass-sim0:0:0:0): Unretryable error
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
> (probe1:umass-sim0:0:0:1): TEST UNIT READY. CDB: 0 20 0 0 0 0
> (probe1:umass-sim0:0:0:1): CAM Status: SCSI Status Error
> (probe1:umass-sim0:0:0:1): SCSI Status: Check Condition
> (probe1:umass-sim0:0:0:1): NOT READY asc:3a,0
> (probe1:umass-sim0:0:0:1): Medium not present
> (probe1:umass-sim0:0:0:1): Unretryable error
> (probe0:umass-sim0:0:0:2): TEST UNIT READY. CDB: 0 40 0 0 0 0
> (probe0:umass-sim0:0:0:2): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:2): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:2): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:2): Medium not present
> (probe0:umass-sim0:0:0:2): Unretryable error
> (probe0:umass-sim0:0:0:3): TEST UNIT READY. CDB: 0 60 0 0 0 0
> (probe0:umass-sim0:0:0:3): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:3): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:3): NOT READY asc:3a,0
> (probe0:umass-sim0:0:0:3): Medium not present
> (probe0:umass-sim0:0:0:3): Unretryable error
> SMP: AP CPU #1 Launched!
> cd0 at ata3 bus 0 target 0 lun 0
> cd0: <Optiarc DVD+-RW AD-7200S 102A> Removable CD-ROM SCSI-0 device
> cd0: 3.300MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <TEAC USB HS-CF Card 4.08> Removable Direct Access SCSI-0 device
> da0: 40.000MB/s transfers
> da0: Attempt to query device size failed: NOT READY, Medium not present
> da1 at umass-sim0 bus 0 target 0 lun 1
> da1: <TEAC USB HS-xD/SM 4.08> Removable Direct Access SCSI-0 device
> da1: 40.000MB/s transfers
> da1: Attempt to query device size failed: NOT READY, Medium not present
> da2 at umass-sim0 bus 0 target 0 lun 2
> da2: <TEAC USB HS-MS Card 4.08> Removable Direct Access SCSI-0 device
> da2: 40.000MB/s transfers
> da2: Attempt to query device size failed: NOT READY, Medium not present
> da3 at umass-sim0 bus 0 target 0 lun 3
> da3: <TEAC USB HS-SD Card 4.08> Removable Direct Access SCSI-0 device
> da3: 40.000MB/s transfers
> da3: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad4s1a
> GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed.
> GEOM_LABEL: Label for provider ad4s1 is ufsid/4b047bd37d66bcd3.
> GEOM_LABEL: Label ufsid/4b047bd775058e20 removed.
> GEOM_LABEL: Label for provider ad4s4 is ufsid/4b047bd775058e20.
> GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed.
> GEOM_LABEL: Label for provider ad4s2 is ufsid/4b047bdffc933b67.
> GEOM_LABEL: Label ufsid/4b047bd37d66bcd3 removed.
> GEOM_LABEL: Label ufsid/4b047bd775058e20 removed.
> GEOM_LABEL: Label ufsid/4b047bdffc933b67 removed.
> drm0: <Intel G33> on vgapci0
> vgapci0: child drm0 requested pci_enable_busmaster
> info: [drm] AGP at 0xd0000000 256MB
> info: [drm] Initialized i915 1.6.0 20080730
> drm0: [ITHREAD]
>
What kind of mouse are you using ? USB ? If so, I don't see any driver
attached.
Also, It does not seem HAL and DBUS services have been started and are running: in some configurations they are required for mouse to work
d
More information about the freebsd-questions
mailing list