FreeBSD 7.1 SMP on IBM x330 Dual Processor server

[Tom Everett]

I'm running the "stock" FreeBSD 7.1 kernel on an IBM x330 machine.  The 
machine has two physical processors but it seems that FreeBSD 7.1 on 
sees one.  I downloaded the kernel source and it seems that the GENERIC 
kernel has SMP installed.  Is there something else I can try?  Thanks in 
advance for your wisdom.

$ sysctl -a | grep cpu
kern.threads.virtual_cpu: 1
kern.ccpu: 0
kern.smp.cpus: 1
kern.smp.maxcpus: 16
debug.cpufreq.verbose: 0
debug.cpufreq.lowest: 0
debug.kdb.stop_cpus: 1
debug.stop_cpus_with_nmi: 1
debug.PMAP1changedcpu: 0
hw.ncpu: 1
hw.acpi.cpu.cx_lowest: C1
machdep.cpu_idle_hlt: 1
machdep.hlt_cpus: 0
dev.cpu.0.%desc: ACPI CPU
dev.cpu.0.%driver: cpu
dev.cpu.0.%location: handle=\_PR_.CPU1
dev.cpu.0.%pnpinfo: _HID=none _UID=0
dev.cpu.0.%parent: acpi0
dev.cpu.0.cx_supported: C1/0
dev.cpu.0.cx_lowest: C1
dev.cpu.0.cx_usage: 100.00%



Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.1-RELEASE #0: Thu Jan  1 14:37:25 UTC 2009
    root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family      1133MHz (1128.54-MHz 
686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073659904 (1023 MB)
avail memory = 1036943360 (988 MB)
ACPI APIC Table: <IBM    SEREMRLD>
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic0 <Version 1.1> irqs 0-15 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <IBM SEREMRLD> on motherboard
acpi0: Overriding SCI Interrupt from IRQ 3 to IRQ 30
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4e8-0x4eb on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> mem 
0xfeb80000-0xfebfffff,0xf0000000-0xf7ffffff at device 1.0 on pci0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x2200-0x223f mem 
0xfeb7f000-0xfeb7ffff,0xfea00000-0xfeafffff irq 27 at device 2.0 on pci0
fxp0: Disabling dynamic standby mode in EEPROM
fxp0: New EEPROM ID: 0x48a0
fxp0: EEPROM checksum @ 0x3f: 0xbe76 -> 0xbe76
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:02:55:c6:69:58
fxp0: [ITHREAD]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x2240-0x227f mem 
0xfeb7e000-0xfeb7efff,0xfe900000-0xfe9fffff irq 25 at device 10.0 on pci0
fxp1: Disabling dynamic standby mode in EEPROM
fxp1: New EEPROM ID: 0x48a0
fxp1: EEPROM checksum @ 0x3f: 0x2d79 -> 0x2d79
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> PHY 1 on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:02:55:c6:69:59
fxp1: [ITHREAD]
isab0: <PCI-ISA bridge> port 0x440-0x44f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x700-0x70f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfeb7d000-0xfeb7dfff irq 7 
at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x2300-0x23ff mem 
0xeffff000-0xefffffff irq 28 at device 3.0 on pci1
ahc0: [ITHREAD]
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
atapci1: <Promise PDC40779 SATA300 controller> port 
0x2280-0x22ff,0x2400-0x24ff mem 
0xefffe000-0xefffefff,0xeffc0000-0xeffdffff irq 20 at device 5.0 on pci1
atapci1: [ITHREAD]
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci1
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci1
ata5: [ITHREAD]
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
fdc0: <floppy drive controller> port 0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
sio0: [FILTER]
cpu0: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 
0xc0000-0xcafff,0xcb000-0xcc7ff,0xcc800-0xd4fff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1128539539 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <LG CD-ROM CRN-8245B/1.13> at ata1-master UDMA33
ad4: 476940MB <Seagate ST3500320AS SD15> at ata2-master SATA150
ad6: 476940MB <Hitachi HDP725050GLA360 GM4OA52A> at ata3-master SATA300
Waiting 5 seconds for SCSI devices to settle
ar0: 476939MB <Promise Fasttrak RAID1> status: READY
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
Trying to mount root from ufs:/dev/ar0s1a