Printing with a laserjet 1018

[Martin Alejandro Paredes Sanchez]

El Mié 05 Mar 2008, Peter escribió:
>
> cat /usr/local/share/foo2zjs/firmware/sihp1018.dl > /dev/ugen0.1
>
> you might need to change your 'ugen0.1' to whatever USB port your printer
> is plugged into.  Before you can use the printer, you have to do that
> above 'cat' command to load firmware.
>
> make sure regular users can use the printer: [chmod 666]
> dsl:#ls -l /dev/ugen0.1
> crw-rw-rw-  1 root  operator    0,  40 Mar  4 23:32 /dev/ugen0.1
>

Since your printer is attached to ugen, this mean that you made a custom 
kernel where you take off the ulpt driver

maps