[Fwd: Re: Problems with ieee80211 dependencies...]
Paul B. Mahol
onemda at gmail.com
Sat Jun 28 14:51:35 UTC 2008
I dont have such problem with CURRENT; all ieee80211 stuff are build
as modules for me, but my conf is different, firewalls and dummynet
are build as modules.
But I was able to reproduce problem with your config file.
Probably conflict arise somewhere within your last 4 lines in conf file.
On 6/28/08, Martes Wigglesworth <martes at mgwigglesworth.com> wrote:
>
> I had to wait for the rebuild process to error out again, however, here
> is the resulting segment of output.
>
> I included the parts that begin to indicates an error.
>
>
> kdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE
> -DHAVE_KERNEL_OPTION_HEADERS -I. -I@ -I@/contrib/altq
> -I/usr/src/sys/i386/compile/DATASERVER
> /usr/src/sys/modules/zyd/../../dev/usb/if_zyd.c
> linking kernel.debug
> if_dc.o(.text+0x955): In function `dc_mchash_le':
> ../../../dev/dc/if_dc.c:1019: undefined reference to `ether_crc32_le'
> if_dc.o(.text+0x9f2): In function `dc_mchash_be':
> ../../../dev/dc/if_dc.c:1054: undefined reference to `ether_crc32_be'
> if_dc.o(.text+0x1df5): In function `dc_detach':
> ../../../dev/dc/if_dc.c:2320: undefined reference to `ether_ifdetach'
> if_dc.o(.text+0x42d7): In function `dc_ioctl':
> ../../../dev/dc/if_dc.c:3632: undefined reference to `ether_ioctl'
> if_dc.o(.text+0x65a5): In function `dc_attach':
> ../../../dev/dc/if_dc.c:2270: undefined reference to `ether_ifattach'
> if_dc.o(.text+0x65fc):../../../dev/dc/if_dc.c:2278: undefined reference
> to `ether_ifdetach'
> if_fxp.o(.text+0x2086): In function `fxp_detach':
> ../../../dev/fxp/if_fxp.c:919: undefined reference to `ether_ifdetach'
> if_fxp.o(.text+0x2402): In function `fxp_ioctl':
> ../../../dev/fxp/if_fxp.c:2467: undefined reference to `ether_ioctl'
> if_fxp.o(.text+0x429f): In function `fxp_attach':
> ../../../dev/fxp/if_fxp.c:789: undefined reference to `ether_ifattach'
> if_fxp.o(.text+0x431b):../../../dev/fxp/if_fxp.c:815: undefined
> reference to `ether_ifdetach'
> if.o(.text+0x1027): In function `if_setlladdr':
> ../../../net/if.c:2646: undefined reference to `arp_ifinit'
> if_gif.o(.text+0x941): In function `gif_input':
> ../../../net/if_gif.c:560: undefined reference to `bridge_input_p'
> if_gif.o(.text+0x95b):../../../net/if_gif.c:567: undefined reference to
> `ether_demux'
> ip_dummynet.o(.text+0x14db): In function `dummynet_send':
> ../../../netinet/ip_dummynet.c:908: undefined reference to `bridge_dn_p'
> ip_dummynet.o(.text+0x153b):../../../netinet/ip_dummynet.c:926:
> undefined reference to `ether_demux'
> ip_dummynet.o(.text+0x154c):../../../netinet/ip_dummynet.c:929:
> undefined reference to `ether_output_frame'
> if_xl.o(.text+0x2078): In function `xl_setmulti_hash':
> ../../../pci/if_xl.c:789: undefined reference to `ether_crc32_be'
> if_xl.o(.text+0x38f6): In function `xl_detach':
> ../../../pci/if_xl.c:1674: undefined reference to `ether_ifdetach'
> if_xl.o(.text+0x4712): In function `xl_ioctl':
> ../../../pci/if_xl.c:3203: undefined reference to `ether_ioctl'
> if_xl.o(.text+0x591d): In function `xl_attach':
> ../../../pci/if_xl.c:1564: undefined reference to `ether_ifattach'
> if_xl.o(.text+0x5970):../../../pci/if_xl.c:1570: undefined reference to
> `ether_ifdetach'
> *** Error code 1
>
> Stop in /usr/src/sys/i386/compile/DATASERVER.
>
>
>>Nothing jumps out at me, can you send the output of the build failure?
>>
>>-Kip
>>
>>On Fri, Jun 27, 2008 at 4:29 PM, Martes Wigglesworth
>><martes at mgwigglesworth.com> wrote:
>> I am having a hard time compiling a new kernel when I remove the
>> wireless aspects of the config file. I have removed all
> options/devices
>> that seem to still require ieee80211 however, I still find that the
>> network section of the compile do not work. I.E. that is where the
>> compile stops, and indicates that an unknown reference to ieee80211
>> functions...
>>
>> What in the GENERIC config file requires ieee80211? I have included my
>> config file below:
>>
>> cpu I686_CPU
>> ident DATASERVER
>>
>> # To statically compile in device wiring instead of /boot/device.hints
>> #hints "GENERIC.hints" # Default places to look for
>> devices.
>>
>> makeoptions DEBUG=-g # Build kernel with gdb(1)
>>
>> options SCHED_ULE # ULE scheduler
>> options PREEMPTION # Enable kernel thread
>> preemption
>> options INET # InterNETworking
>> options INET6 # IPv6 communications
> protocols
>> options SCTP # Stream Control Transmission
>> options FFS # Berkeley Fast Filesystem
>> options SOFTUPDATES # Enable FFS soft updates
>> options UFS_ACL # Support for access control
>> options UFS_DIRHASH # Improve performance on big
>> options UFS_GJOURNAL #
>> options MD_ROOT # MD is a potential root
> device
>> options PROCFS # Process filesystem
>> options PSEUDOFS # Pseudo-filesystem framework
>> options GEOM_PART_GPT # GUID Partition Tables.
>> options GEOM_LABEL # Provides labelization
>> options COMPAT_43TTY
>> options SCSI_DELAY=5000
>> options KTRACE # ktrace(1) support
>> options STACK # stack(9) support
>> options SYSVSHM # SYSV-style shared memory
>> options SYSVMSG # SYSV-style message queues
>> options SYSVSEM # SYSV-style semaphores
>> options _KPOSIX_PRIORITY_SCHEDULING
>> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
>> options ADAPTIVE_GIANT # Giant mutex is adaptive.
>> options STOP_NMI
>> options AUDIT # Security event auditing
>>
>> # To make an SMP kernel, the next two lines are needed
>>
>> # CPU frequency control
>> device cpufreq
>>
>> # Bus support.
>> device eisa
>> device pci
>>
>> # Floppy drives
>> device fdc
>>
>> # ATA and ATAPI devices
>> device ata
>> device atadisk # ATA disk drives
>> device ataraid # ATA RAID drives
>> device atapicam # ATAPI emulation?
>> device atapicd # ATAPI CDROM drives
>> device atapifd # ATAPI floppy drives
>> device atapist # ATAPI tape drives
>> options ATA_STATIC_ID # Static device numbering
>>
>> # SCSI Controllers
>> device ahb # EISA AHA1742 family
>> device ahc # AHA2940 and onboard AIC7xxx devices
>> options AHC_REG_PRETTY_PRINT # Print register bitfields in
>> debug
>> # output. Adds ~128k to
> driver.
>> device ahd
>> options AHD_REG_PRETTY_PRINT
>> # output. Adds ~215k to
> driver.
>> device amd # AMD 53C974 (Tekram DC-390(T))
>> device hptiop # Highpoint RocketRaid 3xxx series
>> device isp # Qlogic family
>> #device ispfw
>> device mpt # LSI-Logic MPT-Fusion
>> #device ncr # NCR/Symbios Logic
>> device sym # NCR/Symbios Logic
>> device trm # Tekram DC395U/UW/F DC315U adapters
>>
>> device adv # Advansys SCSI adapters
>> device adw # Advansys wide SCSI adapters
>> device aha # Adaptec 154x SCSI adapters
>> device aic # Adaptec 15[012]x SCSI adapters
>> device bt # Buslogic/Mylex MultiMaster SCSI
>> adapters
>>
>> device ncv # NCR 53C500
>> device nsp # Workbit Ninja SCSI-3
>> device stg # TMC 18C30/18C50
>>
>> # SCSI peripherals
>> device scbus # SCSI bus (required for SCSI)
>> device ch # SCSI media changers
>> device da # Direct Access (disks)
>> device sa # Sequential Access (tape etc)
>> device cd # CD
>> device pass # Passthrough device (direct SCSI
>> access)
>> device ses # SCSI Environmental Services
>>
>> # RAID controllers interfaced to the SCSI subsystem
>>
>> # RAID controllers
>>
>> # atkbdc0 controls both the keyboard and the PS/2 mouse
>> device atkbdc # AT keyboard controller
>> device atkbd # AT keyboard
>> device psm # PS/2 mouse
>>
>> device kbdmux # keyboard multiplexer
>>
>> device vga # VGA video card driver
>>
>>
>> # syscons is the default console driver, resembling an SCO console
>> device sc
>>
>> device agp # support several AGP chipsets
>>
>> # Add suspend/resume support for the i8254.
>> device pmtimer
>>
>> # PCCARD (PCMCIA) support
>> # PCMCIA and cardbus bridge support
>>
>> # Serial (COM) ports
>> device sio # 8250, 16[45]50 based serial ports
>> device uart # Generic UART driver
>>
>> # Parallel port
>> device ppc
>> device ppbus # Parallel port bus (required)
>> device lpt # Printer
>> device plip # TCP/IP over parallel
>> device ppi # Parallel port interface device
>> #device vpo # Requires scbus and da
>>
>> # If you've got a "dumb" serial or parallel PCI card that is
>> # supported by the puc(4) glue driver, uncomment the following
>> # line to enable it (connects to sio, uart and/or ppc drivers):
>> #device puc
>>
>> # PCI Ethernet NICs.
>>
>> # PCI Ethernet NICs that use the common MII bus controller code.
>> device miibus # MII bus support
>> device dc # DEC/Intel 21143
>> device fxp # Intel EtherExpress PRO/100B
>> device xl # 3Com 3c90x
>>
>> # 'device ed' requires 'device miibus'
>>
>> # Wireless NIC cards
>>
>> # Pseudo devices.
>> device loop # Network loopback
>> device sl # Kernel SLIP
>> device ppp # Kernel PPP
>> device tun # Packet tunnel.
>> device pty # Pseudo-ttys (telnet etc)
>> device md # Memory "disks"
>> device gif # IPv6 and IPv4 tunneling
>> device faith # IPv6-to-IPv4 relaying (translation)
>> device firmware # firmware assist module
>>
>> # The `bpf' device enables the Berkeley Packet Filter.
>> # Be aware of the administrative consequences of enabling this!
>> # Note that 'bpf' is required for DHCP.
>> device bpf # Berkeley packet filter
>>
>> # USB support
>> device uhci # UHCI PCI->USB interface
>> device ohci # OHCI PCI->USB interface
>> device ehci # EHCI PCI->USB interface (USB 2.0)
>> device usb # USB Bus (required)
>> #device udbp # USB Double Bulk Pipe devices
>> device ugen # Generic
>> device uhid # "Human Interface Devices"
>> device ukbd # Keyboard
>> device ulpt # Printer
>> device umass # Disks/Mass storage - Requires scbus
>> and da
>> device ums # Mouse
>> device urio # Diamond Rio 500 MP3 player
>> device uscanner # Scanners
>> # USB Serial devices
>> device ucom # Generic com ttys
>> device uark # Technologies ARK3116 based serial
>> device ubsa # Belkin F5U103 and compatible serial
>> device ubser # BWCT console serial adapters
>> device uftdi # For FTDI usb serial adapters
>> device uipaq # Some WinCE based devices
>> device uplcom # Prolific PL-2303 serial adapters
>> device uslcom # SI Labs CP2101/CP2102 serial
> adapters
>> device uvisor # Visor and Palm devices
>> device uvscom # USB serial support for DDI pocket's
>> PHS
>> # USB Ethernet, requires miibus
>>
>>
> #--------------------------Firewall-Options---------------------------------#
>> options IPFIREWALL
>> options IPFIREWALL_DEFAULT_TO_ACCEPT
>> options IPFIREWALL_VERBOSE
>> options DUMMYNET
>
> _______________________________________________
> freebsd-hackers at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-hackers
> To unsubscribe, send any mail to "freebsd-hackers-unsubscribe at freebsd.org"
>
More information about the freebsd-questions
mailing list