Booting from a large RAID

[Brian A. Seklecki]

For sanity-sake, most systems have a split backplane 2x4 (Check the Dell
PowerEdge 2950 for example) with a RAID-1 root for the system (36gig 15k
RPM etc.) and then a 4x150 or whatever RAID5/RAID10 for the
"Application" data.

This creates some abstraction and aids in emergency situations.

~BAS

On Tue, 2007-06-26 at 00:39 +0100, Dominic Bishop wrote:
> Ideally I would like this to be configured as a single large RAID5 or
> RAID6
> array,  
-- 
Brian A. Seklecki <bseklecki at collaborativefusion.com>
Collaborative Fusion, Inc.




IMPORTANT: This message contains confidential information and is intended only for the individual named. If the reader of this message is not an intended recipient (or the individual responsible for the delivery of this message to an intended recipient), please be advised that any re-use, dissemination, distribution or copying of this message is prohibited.  Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system.