Gnome 2.14

[azhar freebsd]

*How do I upgrade to GNOME 2.14?*

The answer is much simpler than it has been in the past:

   1.

   To build GNOME 2.14, you need to obtain the latest ports tree
   skeleton. This is most easily accomplished with portsnap(8) or
CVSup<http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvsup.html>.
   Simply obtain the latest ports tree, and you are ready to go. Then do the
   following:

   # pkgdb -Ff
   # portupgrade -o net/avahi -f howl
   # portupgrade -o x11/gnome-screensaver -f xscreensaver-gnome

   Then you can run portupgrade(8) as you normally would. *NOTE:* it is
   recommended to run *portupgrade -a* to make sure you get all the
   necessary ports.

from site . http://www.freebsd.org/gnome/docs/faq214.html


root at belagelo]~#uname -a
FreeBSD belagelo.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13
UTC 2005     root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC  i386
You have new mail.
[root at belagelo]~#


i did as above . the cvsip was succesful .
............................

...................
  Delete ports/x11-wm/wmthemeinstall/pkg-plist
 Edit ports/x11-wm/xcompmgr/Makefile
 Edit ports/x11-wm/xcompmgr/distinfo
 Edit ports/x11-wm/xfce/Makefile
 Edit ports/x11-wm/xfce/distinfo
 Edit ports/x11-wm/xfce4/Makefile
 Edit ports/x11-wm/xfce4/pkg-plist
 Edit ports/x11-wm/xfce4-desktop/Makefile
 Edit ports/x11-wm/xfce4-desktop/distinfo
 Edit ports/x11-wm/xfce4-desktop/pkg-plist
 Edit ports/x11-wm/xfce4-panel/Makefile
 Edit ports/x11-wm/xfce4-panel/distinfo
 Edit ports/x11-wm/xfce4-panel/pkg-plist
 Edit ports/x11-wm/xfce4-session/Makefile
 Edit ports/x11-wm/xfce4-session/distinfo
 Edit ports/x11-wm/xfce4-session/pkg-plist
 Edit ports/x11-wm/xfce4-systray/Makefile
 Edit ports/x11-wm/xfce4-systray/distinfo
 Edit ports/x11-wm/xfce4-systray/pkg-plist
 Edit ports/x11-wm/xfce4-wm/Makefile
 Edit ports/x11-wm/xfce4-wm/distinfo
 Edit ports/x11-wm/xfce4-wm/pkg-plist
 Edit ports/x11-wm/yawm/Makefile
 Edit ports/x11-wm/yawm/distinfo
Finished successfully

 The cvsup file was as below
# IMPORTANT: Change the next line to use one of the CVSup mirror sites
# listed at http://www.freebsd.org/doc/handbook/mirrors.html.
*default host=cvsup2.jp.freebsd.org
*default base=/var/db
*default prefix=/usr
*default release=cvs tag=.
*default delete use-rel-suffix

# If you seem to be limited by CPU rather than network or disk bandwidth,
try
# commenting out the following line.  (Normally, today's CPUs are fast
enough
# that you want to run compression.)
*default compress

## Ports Collection.
#
# The easiest way to get the ports tree is to use the "ports-all"
# mega-collection.  It includes all of the individual "ports-*"
# collections,
ports-all



# pkgdb -Ff command was ok .here is the script file .

Script started on Fri Sep 22 02:53:48 2006
executing .cshrc
finished executing .cshrc
[�1mroot at belagelo�m]�1m/home�m#pkgdb -Ff

--->  Checking the package registry database
[Rebuilding the pkgdb <format:bdb1_btree> in /var/db/pkg ... - 225 packages
found (-0 +225)
.................................................................................................................................................................................................................................
done]
Stale origin: 'devel/bugbuddy': perhaps moved or obsoleted.
-> The port 'devel/bugbuddy' was moved to 'devel/bug-buddy' on 2006-05-27
because:
    "Renamed to use real vendor package name"
Fixed. (-> devel/bug-buddy)
Stale origin: 'archivers/fileroller': perhaps moved or obsoleted.
-> The port 'archivers/fileroller' was moved to 'archivers/file-roller' on
2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> archivers/file-roller)
Stale origin: 'x11/gnomeapplets2': perhaps moved or obsoleted.
-> The port 'x11/gnomeapplets2' was moved to 'x11/gnome-applets' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> x11/gnome-applets)
Stale origin: 'audio/gnomeaudio2': perhaps moved or obsoleted.
-> The port 'audio/gnomeaudio2' was moved to 'audio/gnome-audio' on
2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> audio/gnome-audio)
Stale origin: 'sysutils/gnomecontrolcenter2': perhaps moved or obsoleted.
-> The port 'sysutils/gnomecontrolcenter2' was moved to
'sysutils/gnome-control-center' on 2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> sysutils/gnome-control-center)
Stale origin: 'x11/gnomedesktop': perhaps moved or obsoleted.
-> The port 'x11/gnomedesktop' was moved to 'x11/gnome-desktop' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> x11/gnome-desktop)
Stale origin: 'textproc/gnomedocutils': perhaps moved or obsoleted.
-> The port 'textproc/gnomedocutils' was moved to 'textproc/gnome-doc-utils'
on 2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> textproc/gnome-doc-utils)
Stale origin: 'games/gnomegames2': perhaps moved or obsoleted.
-> The port 'games/gnomegames2' was moved to 'games/gnome-games' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> games/gnome-games)
Stale origin: 'security/gnomekeyring': perhaps moved or obsoleted.
-> The port 'security/gnomekeyring' was moved to 'security/gnome-keyring' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> security/gnome-keyring)
Stale origin: 'accessibility/gnomemag': perhaps moved or obsoleted.
-> The port 'accessibility/gnomemag' was moved to 'accessibility/gnome-mag'
on 2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> accessibility/gnome-mag)
Stale origin: 'audio/gnomemedia2': perhaps moved or obsoleted.
-> The port 'audio/gnomemedia2' was moved to 'audio/gnome-media' on
2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> audio/gnome-media)
Stale origin: 'misc/gnomemimedata': perhaps moved or obsoleted.
-> The port 'misc/gnomemimedata' was moved to 'misc/gnome-mime-data' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> misc/gnome-mime-data)
Stale origin: 'net/gnomenetstatus': perhaps moved or obsoleted.
-> The port 'net/gnomenetstatus' was moved to 'net/gnome-netstatus' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> net/gnome-netstatus)
Stale origin: 'net/gnomenettool': perhaps moved or obsoleted.
-> The port 'net/gnomenettool' was moved to 'net/gnome-nettool' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> net/gnome-nettool)
Stale origin: 'x11/gnomepanel': perhaps moved or obsoleted.
-> The port 'x11/gnomepanel' was moved to 'x11/gnome-panel' on 2006-05-28
because:
    "Renamed to use real vendor package name"
Fixed. (-> x11/gnome-panel)
Stale origin: 'x11/gnomesession': perhaps moved or obsoleted.
-> The port 'x11/gnomesession' was moved to 'x11/gnome-session' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> x11/gnome-session)
Stale origin: 'accessibility/gnomespeech': perhaps moved or obsoleted.
-> The port 'accessibility/gnomespeech' was moved to
'accessibility/gnome-speech' on 2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> accessibility/gnome-speech)
Stale origin: 'textproc/gnomespell': perhaps moved or obsoleted.
-> The port 'textproc/gnomespell' was moved to 'textproc/gnome-spell' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> textproc/gnome-spell)
Stale origin: 'sysutils/gnomesystemmonitor': perhaps moved or obsoleted.
-> The port 'sysutils/gnomesystemmonitor' was moved to
'sysutils/gnome-system-monitor' on 2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> sysutils/gnome-system-monitor)
Stale origin: 'sysutils/gnomesystemtools': perhaps moved or obsoleted.
-> The port 'sysutils/gnomesystemtools' was moved to
'sysutils/gnome-system-tools' on 2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> sysutils/gnome-system-tools)
Stale origin: 'x11/gnometerminal': perhaps moved or obsoleted.
-> The port 'x11/gnometerminal' was moved to 'x11/gnome-terminal' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> x11/gnome-terminal)
Stale origin: 'misc/gnomeuserdocs2': perhaps moved or obsoleted.
-> The port 'misc/gnomeuserdocs2' was moved to 'misc/gnome-user-docs' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> misc/gnome-user-docs)
Stale origin: 'deskutils/gnomeutils2': perhaps moved or obsoleted.
-> The port 'deskutils/gnomeutils2' was moved to 'deskutils/gnome-utils' on
2006-05-27 because:
    "Renamed to use real vendor package name"
Fixed. (-> deskutils/gnome-utils)
Stale origin: 'devel/gnomevfs2': perhaps moved or obsoleted.
-> The port 'devel/gnomevfs2' was moved to 'devel/gnome-vfs' on 2006-05-28
because:
    "Renamed to use real vendor package name"
Fixed. (-> devel/gnome-vfs)
Stale origin: 'graphics/libart_lgpl2': perhaps moved or obsoleted.
-> The port 'graphics/libart_lgpl2' was moved to 'graphics/libart_lgpl' on
2006-05-28 because:
    "Renamed to use real vendor package name"
Fixed. (-> graphics/libart_lgpl)
Stale origin: 'devel/libgtop2': perhaps moved or obsoleted.
-> The port 'devel/libgtop2' was moved to 'devel/libgtop' on 2006-05-27
because:
    "Renamed to use real vendor package name"
Fixed. (-> devel/libgtop)
Stale origin: 'x11-fm/nautilus2': perhaps moved or obsoleted.
-> The port 'x11-fm/nautilus2' was moved to 'x11-fm/nautilus' on 2006-05-28
because:
    "Use unversioned name"
Fixed. (-> x11-fm/nautilus)
Stale origin: 'devel/pkgconfig': perhaps moved or obsoleted.
-> The port 'devel/pkgconfig' was moved to 'devel/pkg-config' on 2006-05-27
because:
    "Renamed to use real vendor package name"
Fixed. (-> devel/pkg-config)
Stale origin: 'mail/ximian-connector': perhaps moved or obsoleted.
-> The port 'mail/ximian-connector' was moved to 'mail/evolution-exchange'
on 2005-11-04 because:
    "POOF! Now it's called evolution-exchange!"
Fixed. (-> mail/evolution-exchange)
[�1mroot at belagelo�m]�1m/home�m#exit

exit

Script done on Fri Sep 22 02:56:23 2006


then the # portupgrade -o net/avahi -f howl command .it was also ok .

[�1mroot at belagelo�m]�1m/home�m#portupgrade -o net/avahi -f howl

[Updating the portsdb <format:bdb1_btree> in /usr/ports ... - 13306 port
entries found
.........1000.........2000.........3000.........4000.........5000.........6000.........7000.........8000.........9000.........10000.........11000.........12000.........13000...
..... done]
** Detected a package name change: howl (net/howl) -> 'avahi' (net/avahi)
--->  Downgrading 'howl-1.0.0' to 'avahi-0.6.13_3' (net/avahi)
--->  Building '/usr/ports/net/avahi'
===>  Cleaning for libtool-1.5.22_2
===>  Cleaning for gmake-3.81_1
===>  Cleaning for pkg-config-0.21
===>  Cleaning for expat-2.0.0_1
===>  Cleaning for libdaemon-0.10_1
===>  Cleaning for dbus-0.62_1
===>  Cleaning for gdbm-1.8.3_2
===>  Cleaning for glib-2.10.3
===>  Cleaning for ldconfig_compat-1.0_8
===>  Cleaning for gettext-0.14.5_2
===>  Cleaning for libxml2-2.6.26
===>  Cleaning for perl-5.8.8
===>  Cleaning for libiconv-1.9.2_2
===>  Cleaning for avahi-0.6.13_3
....................................................

===>  Cleaning for imake-6.9.0
===>  Cleaning for libdrm-2.0.2
===>  Cleaning for fontconfig-2.3.2_5 ,1
===>  Cleaning for xorg-clients-6.9.0_3
===>  Cleaning for bitstream-vera-1.10_2
===>  Cleaning for xterm-220
===>  Cleaning for avahi+libdns-0.6.13_3
--->  Cleaning out obsolete shared libraries
[Updating the pkgdb <format:bdb1_btree> in /var/db/pkg ... - 237 packages
found (-0 +2) .. done]
You have new mail.
[�1mroot at belagelo�m]�1m/home�m#exit

exit

Script done on Fri Sep 22 03:34:49 2006


but the problem appeared # portupgrade -o x11/gnome-screensaver -f
xscreensaver-gnome
its about libbonobo .

Script started on Fri Sep 22 03:34:56 2006
executing .cshrc
finished executing .cshrc
You have mail.
[�1mroot at belagelo�m]�1m/home�m#sssssss # portupgrade -o
x11/gnome-screensaver -f xscreensa ver-gnome

sssssss: Command not found.
[�1mroot at belagelo �m]�1m/home�m#sssssss # portupgrade -o
x11/gnome-screensaver -f xscreensa
ver-gnome
�A�79C �P�49Cvv
�P�A�30C�P�50Cee
�P�A�29C�P�51Crr
�P�A�28C�P�52C--
�P�A�27C�P�53Cgg
�P�A�26C�P�54Cnn
ome�K�A�22C�P�55Coo
me�K�A�22C�P�56Cmm
e�K�A�22C�P�57Cee
�K�A�22C�P

** Detected a package name change: xscreensaver-gnome
(x11/xscreensaver-gnome) -> 'gnome-screensaver' (x11/gnome-screensaver)
--->  Downgrading 'xscreensaver-gnome-4.22' to 'gnome-screensaver-2.14.3'
(x11/gnome-screensaver)
--->  Building '/usr/ports/x11/gnome-screensaver'

...........................................................................



===>  Installing for openldap-client-2.3.27

===>  openldap-client-2.3.27 conflicts with installed package(s):
      openldap-client-2.2.27

      They install files into the same place.
      Please remove them first with pkg_delete(1).
*** Error code 1

Stop in /usr/ports/net/openldap23-client.
*** Error code 1

Stop in /usr/ports/devel/gconf2.
*** Error code 1

Stop in /usr/ports/x11/gnome-screensaver.
*** Error code 1

Stop in /usr/ports/x11/gnome-screensaver.
** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade60409.0
make
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
    ! x11/gnome-screensaver (xscreensaver-gnome-4.22)    (unknown build
error)
--->  Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed
[�1mroot at belagelo�m]�1m/home�m#pkg_delete openldap-client-2.3.2�[K�K�K2.27

pkg_delete: package 'openldap-client-2.2.27' is required by these other
packages
and may not be deinstalled:
evolution-2.2.3_1
evolution-data-server-1.2.3
evolution-webcal-2.2.1
gnome2-2.10.2
gnomeapplets2-2.10.1_3
gnomenetstatus-2.10.0_1
gnomepanel-2.10.2
gnomeutils2-2.10.1,1

......................................

checking for SOUND_TEST... yes
checking for LIBGNOME... configure: error: Package requirements ( glib-2.0>=
2.8.0   gobject-2.0 >= 2.0.0   gmodule-2.0 >= 2.8.0   gobject-2.0 >= 2.8.0
gnome-vfs-2.0 >= 2.5.3   libbonobo-2.0 >= 2.13.0   gconf-2.0 >= 1.1.11
esound >= 0.2.26         audiofile >= 0.2.3) were not met:

Requested 'libbonobo-2.0 >= 2.13.0' but version of libbonobo is 2.10.0

Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.

Alternatively, you may set the environment variables LIBGNOME_CFLAGS
and LIBGNOME_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.

===>  Script "configure" failed unexpectedly.
Please run the gnomelogalyzer, available from
"http://www.freebsd.org/gnome/gnomelogalyzer.sh ", which will diagnose the
problem and suggest a solution. If - and only if - the gnomelogalyzer cannot

solve the problem, report the build failure to the FreeBSD GNOME team at
gnome at FreeBSD.org, and attach (a)
"/usr/ports/x11/libgnome/work/libgnome-2.14.1/config.log", (b) the output of

the failed make command, and (c) the gnomelogalyzer output. Also, it might
be a good idea to provide an overview of all packages installed on your
system
(i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1)
with
the attachment. Try to avoid sending any attachments to the mailing list
( gnome at FreeBSD.org), because attachments sent to FreeBSD mailing lists are
usually discarded by the mailing list software.
*** Error code 1

Stop in /usr/ports/x11/libgnome.
*** Error code 1

Stop in /usr/ports/x11/gnome-screensaver.
** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade97438.0
make
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
    ! x11/gnome-screensaver (xscreensaver-gnome-4.22 )    (configure error)
--->  Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed


then i deleted the installed bonobo(seems old version) and again tried
to execute this command


this time it the message is like below .

Bonobo_Sample_Echo.h:48: error: syntax error before "struct"
Bonobo_Sample_Echo-common.c:43: error: syntax error before "struct"
gmake[3]: *** [Bonobo_Sample_Echo-common.o] ・ィ・鬘シ 1
gmake[3]: ・ヌ・」・・ッ・ネ・・`/usr/ports/devel/libbonobo/work/libbonobo-
2.14.0/samples/echo'
、ォ、鮨ミ、゛、ケ
gmake[2]: *** [all-recursive] ・ィ・鬘シ 1
gmake[2]: ・ヌ・」・・ッ・ネ・・`/usr/ports/devel/libbonobo/work/libbonobo-2.14.0/samples'
、ォ、鮨ミ、゛、ケ
gmake[1]: *** [all-recursive] ・ィ・鬘シ 1
gmake[1]: ・ヌ・」・・ッ・ネ・・`/usr/ports/devel/libbonobo/work/libbonobo- 2.14.0'
、ォ、鮨ミ、゛、ケ
gmake: *** [all] ・ィ・鬘シ 2
*** Error code 2

Stop in /usr/ports/devel/libbonobo.
*** Error code 1

Stop in /usr/ports/x11/gnome-screensaver.
** Command failed [exit code 1]: /usr/bin/script -qa /tmp/portupgrade43939.0
make
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
    ! x11/gnome-screensaver (xscreensaver-gnome-4.22)    (new compiler
error)
--->  Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed
[�1mroot at belagelo�m]�1m/home�m#exit

exit

Script done on Fri Sep 22 15:21:08 2006


please give me some advice . how i can install gnome2.14 . thanks in advance
.


best regards
azhar