freebsd doesm't see my script on boot

[Jerry McAllister]

On Mon, Nov 27, 2006 at 06:30:43PM +0200, Gregory Edigarov wrote:

> Hello, Everybody
> 
> Well, here is what I am doing:
> ls -l /usr/local/etc/rc.d
> total 30
> -r-xr-xr-x  1 root  wheel  4744 Nov 13 11:38 apache22
> -r-xr-xr-x  1 root  wheel   673 Nov 13 14:27 clamav-clamd
> -r-xr-xr-x  1 root  wheel   722 Nov 13 14:27 clamav-freshclam
> -r-xr-xr-x  1 root  wheel  1057 Nov 13 14:27 clamav-milter
> -r-xr-xr-x  1 root  wheel  1254 Nov 13 13:01 gnugk
> -r-xr-xr-x  1 root  wheel   198 Nov 15 01:17 l2tpd
> -r-xr-xr-x  1 root  wheel   196 Nov 14 12:35 popa3d
> -r-xr-xr-x  1 root  wheel  1642 Nov 13 11:19 quagga
> -r-xr-xr-x  1 root  wheel  4371 Nov 13 14:00 samba
> -r-xr-xr-x  1 root  wheel  1324 Nov 14 15:20 squid
> -r-xr-xr-x  1 root  wheel   564 Nov 13 11:19 watchquagga


Doesn't the name need to end in '.sh' to be recognized and run from rc.d?

It used to be that way anyway and I haven't noticed that it
has changed.

Try changing the name to l2tpd.sh -- and leave it executable, of course.

////jerry


> cat /usr/local/etc/rc.d/l2tpd
> #!/bin/sh
> 
> #PROVIDE l2tpd
> #REQUIRE NETWORKING
> 
> . /etc/rc.subr
> 
> name="l2tpd"
> rcvar=`set_rcvar`
> command="/usr/local/sbin/${name}"
> flags=""
> echo "l2tp debug"
> 
> load_rc_config $name
> run_rc_command "$1"
> 
> in rc.conf:
> l2tpd_enable="YES"
> 
> Then after  reboot:
> ps ax | grep l2tpd
> 667  v1  RL+    0:00.00 grep l2tpd
> 
> i.e no l2tpd has been started.
> no messages on console, either. My script just got silently skipped, all 
> other services are starting up fine.
> 
> What's  wrong?
> 
> -- 
> With best  regards,
>    Gregory Edigarov
> 
> 
> 
> _______________________________________________
> freebsd-questions at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "freebsd-questions-unsubscribe at freebsd.org"