FreeBSD 6.0 compat with DL320 G4

Ted Mittelstaedt tedm at toybox.placo.com
Wed May 3 21:00:59 UTC 2006


Just an update, I checked again and our server is running
a 3.0Ghz not a 2.8Ghz pentium D.

Ted

>-----Original Message-----
>From: Ted Mittelstaedt [mailto:tedm at toybox.placo.com]
>Sent: Wednesday, May 03, 2006 1:44 PM
>To: freebsd-questions at freebsd.org
>Cc: 'William'
>Subject: RE: FreeBSD 6.0 compat with DL320 G4
>
>
>
>Hi All,
>
>  This server is using the Broadcom BCM5704C, the problem child
>chipset (that is
>discussed in the PR 94307 that I referred to) is the BCM5714.
>
>This is also running a different CPU - your running a 3.4Ghz
>pentium 4, we are running
>a 2.8Ghz Pentium D.  Your CPU chip ID is 0xf43 ours is 0xf44
>
>  While you can specify different CPU speeds, I would be pretty
>nervous in
>assuming that simply specifying a different CPU speed would
>change the ethernet
>chipset on the motherboard.
>
>  If William does go forward with his order I would certainly
>suggest he order the
>faster server, and cross his fingers.
>
>  NoSpam it would be very useful if you could submit a followup
>to the PR 94307
>with your dmesg, and note that while the server model # is the
>same the ethernet
>chipset is different.
>
>Ted
>
>>-----Original Message-----
>>From: owner-freebsd-questions at freebsd.org
>>[mailto:owner-freebsd-questions at freebsd.org]On Behalf Of
>>No at SPAM@mgEDV.net
>>Sent: Tuesday, May 02, 2006 7:25 AM
>>To: freebsd-questions at freebsd.org
>>Cc: 'William'
>>Subject: RE: FreeBSD 6.0 compat with DL320 G4
>>
>>
>>
>>> What was your experience like with 6.0-RELEASE and the dl320 g4? I've
>>> had a quote back on that model so could be near to actually getting
>>> some hardware for once :)
>>
>>we didn't really run 6.0-RELEASE on the system, as the 6.1-BETAs had
>>been out when we bought the server. therefore not really man exp. on
>>this.
>>
>>for ted's request, here's the dmesg ;-)
>>----------------------------------------------------------------
>>------------
>>-
>>Copyright (c) 1992-2006 The FreeBSD Project.
>>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992,
>1993, 1994
>>	The Regents of the University of California. All rights reserved.
>>FreeBSD 6.1-RC2 #0: Sun Apr 30 09:42:38 UTC 2006
>>    root at opus.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
>>ACPI APIC Table: <HP     00000083>
>>Timecounter "i8254" frequency 1193182 Hz quality 0
>>CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3391.52-MHz 686-class CPU)
>>  Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
>>
>>Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,
>>MTRR,PGE,MCA
>>,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>>  Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
>>  AMD Features=0x20000000<LM>
>>  Logical CPUs per core: 2
>>real memory  = 1073688576 (1023 MB)
>>avail memory = 1041743872 (993 MB)
>>ioapic0 <Version 2.0> irqs 0-23 on motherboard
>>ioapic1 <Version 2.0> irqs 24-47 on motherboard
>>ioapic2 <Version 2.0> irqs 48-71 on motherboard
>>kbd1 at kbdmux0
>>acpi0: <HP D18> on motherboard
>>acpi0: Power Button (fixed)
>>Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
>>acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
>>cpu0: <ACPI CPU> on acpi0
>>pcib0: <ACPI Host-PCI bridge> on acpi0
>>pci0: <ACPI PCI bus> on pcib0
>>pcib0: no PRT entry for 0.31.INTA
>>pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
>>pci5: <ACPI PCI bus> on pcib1
>>pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5
>>pci6: <ACPI PCI bus> on pcib2
>>bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
>>0xfdff0000-0xfdffffff irq 24 at device 1.0 on pci6
>>miibus0: <MII bus> on bge0
>>brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
>>brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>>1000baseTX-FDX, auto
>>bge0: Ethernet address: 00:15:60:aa:39:d2
>>bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
>>0xfdfe0000-0xfdfeffff irq 25 at device 1.1 on pci6
>>miibus1: <MII bus> on bge1
>>brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
>>brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
>>1000baseTX-FDX, auto
>>bge1: Ethernet address: 00:15:60:aa:39:d1
>>pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci5
>>pci9: <ACPI PCI bus> on pcib3
>>pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
>>pci2: <ACPI PCI bus> on pcib4
>>uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
>>0x1000-0x101f irq 16 at device 29.0 on pci0
>>uhci0: [GIANT-LOCKED]
>>usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
>>usb0: USB revision 1.0
>>uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>uhub0: 2 ports with 2 removable, self powered
>>uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
>>0x1020-0x103f irq 17 at device 29.1 on pci0
>>uhci1: [GIANT-LOCKED]
>>usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
>>usb1: USB revision 1.0
>>uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>uhub1: 2 ports with 2 removable, self powered
>>uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
>>0x1040-0x105f irq 18 at device 29.2 on pci0
>>uhci2: [GIANT-LOCKED]
>>usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
>>usb2: USB revision 1.0
>>uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>uhub2: 2 ports with 2 removable, self powered
>>uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
>>0x1060-0x107f irq 19 at device 29.3 on pci0
>>uhci3: [GIANT-LOCKED]
>>usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
>>usb3: USB revision 1.0
>>uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>>uhub3: 2 ports with 2 removable, self powered
>>ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem
>>0xfbef0000-0xfbef03ff
>>irq 16 at device 29.7 on pci0
>>ehci0: [GIANT-LOCKED]
>>usb4: EHCI version 1.0
>>usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
>>usb4: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
>>usb4: USB revision 2.0
>>uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>>uhub4: 8 ports with 8 removable, self powered
>>umass0: USB Flash Disk, rev 2.00/2.00, addr 2
>>pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
>>pci1: <ACPI PCI bus> on pcib5
>>pci1: <base peripheral> at device 2.0 (no driver attached)
>>pci1: <base peripheral> at device 2.2 (no driver attached)
>>pci1: <display, VGA> at device 3.0 (no driver attached)
>>isab0: <PCI-ISA bridge> at device 31.0 on pci0
>>isa0: <ISA bus> on isab0
>>atapci0: <Intel ICH6 UDMA100 controller> port
>>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 7 at device
>>31.1 on pci0
>>ata0: <ATA channel 0> on atapci0
>>ata1: <ATA channel 1> on atapci0
>>atapci1: <Intel ICH6 SATA150 controller> port
>>0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0
>>x10af mem
>>0xfbee0000-0xfbee03ff irq 17 at device 31.2 on pci0
>>ata2: <ATA channel 0> on atapci1
>>ata3: <ATA channel 1> on atapci1
>>acpi_tz0: <Thermal Zone> on acpi0
>>atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
>>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>>kbd0 at atkbd0
>>atkbd0: [GIANT-LOCKED]
>>psm0: <PS/2 Mouse> irq 12 on atkbdc0
>>psm0: [GIANT-LOCKED]
>>psm0: model Generic PS/2 mouse, device ID 0
>>sio0: <Standard PC COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on acpi0
>>sio0: type 16550A
>>fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6
>>drq 2 on acpi0
>>fdc0: [FAST]
>>pmtimer0 on isa0
>>orm0: <ISA Option ROMs> at iomem
>>0xc0000-0xc7fff,0xc8000-0xcc7ff,0xee000-0xeffff on isa0
>>ppc0: parallel port not found.
>>sc0: <System console> at flags 0x100 on isa0
>>sc0: VGA <16 virtual consoles, flags=0x300>
>>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
>>0xa0000-0xbffff on isa0
>>Timecounter "TSC" frequency 3391523707 Hz quality 800
>>Timecounters tick every 1.000 msec
>>acd0: CDROM <ASUS CD-S500/A/V1.4D> at ata0-master UDMA33
>>ad4: 76319MB <Maxtor 6L080M0 BACE1G10> at ata2-master SATA150
>>ad6: 76319MB <Maxtor 6L080M0 BACE1G10> at ata3-master SATA150
>>ar0: 76319MB <Intel MatrixRAID RAID1> status: READY
>>ar0: disk0 READY (master) using ad4 at ata2-master
>>ar0: disk1 READY (mirror) using ad6 at ata3-master
>>Trying to mount root from ufs:/dev/ar0s1a
>>----------------------------------------------------------------
>>------------
>>-
>>
>>_______________________________________________
>>freebsd-questions at freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>>To unsubscribe, send any mail to
>>"freebsd-questions-unsubscribe at freebsd.org"
>>
>>--
>>No virus found in this incoming message.
>>Checked by AVG Free Edition.
>>Version: 7.1.385 / Virus Database: 268.5.1/328 - Release Date: 5/1/2006
>>



More information about the freebsd-questions mailing list