multiple hardware problems on Sony VAIO
Erik Nørgaard
norgaard at locolomo.org
Sun Jul 23 10:32:09 UTC 2006
Hi:
I am trying to get things up working (FBSD 6.1-STABLE) on a VAIO FJ3S
notebook, but have trouble with some devices: cardbus, wireless network
and sound. And I haven't even tried looking at the built in camera,
memory card reader or firewire ...
It may be related, they are all on a ICH6 controler
Wireless: The NIC should be supported by the iwi driver after installing
net/iwi-firmware-kmod, but I keep getting the following errors:
iwi0: timeout waiting for iwi_bss firmware initialization to complete
iwi0: could not load boot firmware iwi_bss
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
if_iwi and iwi_bss are loaded at boot.
No sound:
Intel High Definition Audio Controller is recognized but not supported.
Some googling suggested that OpenSound System drivers support this but
no luck:
hdaudio: RIRB timeout
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
Cardbus: Kernel is compiled with the usual cardbus devices, and I can't
seem to find others in NOTES, but while it is recognized it doesn't
work. If only it did I could use my old wireless nic :( The cardbus is a
Texas Instruments and combines cardbus and firewire in the same chipset
(*sigh*) so firewire probably doesn't work either, but currently I have
no such devices.
It may be related to the ICH6 pcibus, there are problems assigning
memory and irq's and an irq storm is detected. dmesg and pciconf output
follows below.
I have tried both GENERIC kernel an kernel built with ich*/smbus/smb
modules, sources CVSUP'ed two days ago.
Any suggestions on how to solve this?
Thanks, Erik
dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #1: Sat Jul 22 20:26:58 CEST 2006
norgaard at photon.daemonsecurity.com:/usr/obj/usr/src/sys/VAIO
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
Features2=0x180<EST,TM2>
AMD Features=0x100000<NX>
real memory = 1063845888 (1014 MB)
avail memory = 1036296192 (988 MB)
kbd1 at kbdmux0
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82915GM (915GM GMCH) SVGA controller> port 0x1800-0x1807
mem 0xb0080000-0xb00fffff,0xc0000000-0xcfffffff,0xb0040000-0xb007ffff
irq 10 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <display> at device 2.1 (no driver attached)
pci0: <multimedia> at device 27.0 (no driver attached)
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1820-0x183f irq 5 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1840-0x185f irq 10 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <Intel 82801FB (ICH6) USB 2.0 controller> mem
0xb0004000-0xb00043ff irq 5 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: wrong number of companions (4 != 2)
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 82801FB (ICH6) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 8 ports with 8 removable, self powered
ugen0: Vimicro Corp. USB2.0 Web Camera, rev 2.00/1.00, addr 2
pcib1: <PCI-PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0x2000-0x20ff mem
0xb0104000-0xb01040ff irq 10 at device 8.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:13:a9:44:44:a8
cbb0: <PCI-CardBus Bridge> mem 0xb0105000-0xb0105fff irq 10 at device
9.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci6: <serial bus, FireWire> at device 9.2 (no driver attached)
pci6: <mass storage> at device 9.3 (no driver attached)
iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xb0107000-0xb0107fff irq 10 at
device 10.0 on pci6
iwi0: Ethernet address: 00:16:6f:93:c9:75
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1870-0x187f at device 31.2 on pci0
atapci0: failed to enable memory mapping!
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ichsmb0: <SMBus controller> port 0x18a0-0x18bf irq 10 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcffff,0xd0000-0xd0fff,0xdb800-0xdbfff,0xdc000-0xdffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <INT0800> can't assign resources (memory)
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0f13> can't assign resources (irq)
Timecounter "TSC" frequency 1729014440 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 95396MB <TOSHIBA MK1032GSX AS021G> at ata0-master SATA150
acd0: DVDR <MATSHITADVD-RAM UJ-850S/1.00> at ata1-master UDMA33
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
Interrupt storm detected on "irq5:"; throttling interrupt source
iwi0: timeout waiting for iwi_bss firmware initialization to complete
iwi0: could not load boot firmware iwi_bss
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
drmsub0: <Intel i915GM>: (child of agp_i810.c) on agp0
info: [drm] AGP at 0xb0080000 0MB
info: [drm] Initialized i915 1.4.0 20060119
firmware_get: failed to load firmware image iwi_bss
iwi0: could not load firmware
hdaudio: RIRB timeout
hdaudio: Codec attach failed (-5)
oss: Probing the hardware for Intel High Definition Audio (Azalia)
controller failed.
pciconf -lv:
hostb0 at pci0:0:0: class=0x060000 card=0x81f1104d chip=0x25908086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82915PM/GM/GMS, 82910GML Host Bridge'
class = bridge
subclass = HOST-PCI
agp0 at pci0:2:0: class=0x030000 card=0x81f1104d chip=0x25928086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS, 82910GML Integrated Graphics Device'
class = display
subclass = VGA
none0 at pci0:2:1: class=0x038000 card=0x81f1104d chip=0x27928086 rev=0x03
hdr=0x00
vendor = 'Intel Corporation'
device = '82915GM/GMS,82910GML Mobile Express Family Graphics
Controller (??)'
class = display
none1 at pci0:27:0: class=0x040300 card=0x81f1104d chip=0x26688086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW Intel High DefiNition Audio Controller'
class = multimedia
uhci0 at pci0:29:0: class=0x0c0300 card=0x81f1104d chip=0x26588086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x81f1104d chip=0x26598086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x81f1104d chip=0x265c8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib1 at pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086
rev=0xd3 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
Bridge'
class = bridge
subclass = PCI-PCI
isab0 at pci0:31:0: class=0x060100 card=0x81f1104d chip=0x26418086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:2: class=0x010180 card=0x81f1104d chip=0x26538086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M SATA Controller'
class = mass storage
subclass = ATA
ichsmb0 at pci0:31:3: class=0x0c0500 card=0x81f1104d chip=0x266a8086
rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW SMBus Controller'
class = serial bus
subclass = SMBus
rl0 at pci6:8:0: class=0x020000 card=0x81f1104d chip=0x813910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RT8139 (A/B/C/810x/813x/C+) Fast Ethernet Adapter'
class = network
subclass = ethernet
cbb0 at pci6:9:0: class=0x060700 card=0x81f1104d chip=0xac8e104c rev=0x00
hdr=0x02
vendor = 'Texas Instruments (TI)'
device = 'PCI7420 FireWire + CardBuss Controller'
class = bridge
subclass = PCI-CardBus
none2 at pci6:9:2: class=0x0c0010 card=0x81f1104d chip=0x802e104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller'
class = serial bus
subclass = FireWire
none3 at pci6:9:3: class=0x018000 card=0x81f1104d chip=0xac8f104c rev=0x00
hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'PCI7420/PCI7620 Dual Socket CardBus and Smart Card Cont.
w/ 1394a-2000 OHCI Two-Port PHY/Link-Layer Cont. and SD/MS-Pro Sockets'
class = mass storage
iwi0 at pci6:10:0: class=0x028000 card=0x27538086 chip=0x42208086 rev=0x05
hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 2200BG Network Connection'
class = network
--
Ph: +34.666334818 web: http://www.locolomo.org
X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt
Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 4128 bytes
Desc: S/MIME Cryptographic Signature
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20060723/32ebd8ca/smime.bin
More information about the freebsd-questions
mailing list