cdrecord on Thinkpad T43

Fabian Keil freebsd-listen at fabiankeil.de
Sat Apr 8 19:41:10 UTC 2006


"Erin Sharmahd" <tuxgirl at gmail.com> wrote:

> I've been having some problems getting cdrecord to work on my
> thinkpad.
> 
> http://www.mathematik.uni-marburg.de/~schmidtm/ibm/index.php says:
> "To burn CDs with cdrecord don't forget to enable atapicam during
> kernel configuration."
> 
> In his kernel config, he used this with "device atapicd", so I ran:

He doesn't use atapicam in his kernel configuration.

> [amon-re /root] cat /sys/i386/conf/GENERIC | grep atapicd
> device          atapicd         # ATAPI CDROM drives
> 
> In the past (on Linux), I had always used 'cdrecord dev=/dev/cdrom',
> so I initially tried 'cdrecord dev=/dev/acd0', but I learned from
> 'cdrecord dev=help' that apparently "open via UNIX device" is not
> supported.  "SCSI Bus scanning" is supposed to be supported, but when
> I run 'cdrecord -scanbus', it gives:
> [amon-re /root] cdrecord -scanbus
> Cdrecord-Clone 2.01 (i386-unknown-freebsd6.1) Copyright (C) 1995-2004
> Jörg Schilling
> cdrecord: Error 0. Cannot open SCSI driver.
> cdrecord: For possible targets try 'cdrecord -scanbus'.
> cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
> 
> (it would be nice if cdrecord -scanbus didn't tell me to run it
> again... but that's a different issue)
> 
> Here is some (hopefully) relevant information about my system:
> 
> [amon-re /root] uname -a
> FreeBSD amon-re 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #1: Sat Feb 11
> 21:55:30 MST 2006     zoot at amon-re:/usr/obj/usr/src/sys/GENERIC  i386
> 
> [amon-re /root] sysctl -a | grep -i cd
> kern.cam.cd.changer.min_busy_seconds: 5
> kern.cam.cd.changer.max_busy_seconds: 15
>   allocdirect     4     1K       -    79793  128
>    acd_driver     1     2K       -        1  2048
>          cdev    31     4K       -       31  128
> debug.sizeof.cdev: 184
> debug.sizeof.cdev_priv: 216
> dev.acpi_ec.0.%desc: Embedded Controller: GPE 0x1c, ECDT
> dev.cbb.0.%location: slot=0 function=0 handle=\_SB_.PCI0.PCI1.CDBS
> dev.acd.0.%desc: MATSHITADVD-RAM UJ-822S/1.61
> dev.acd.0.%driver: acd
> dev.acd.0.%parent: ata1
> 
> [amon-re /root] dmesg | grep -i cd
> acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x62,0x66 on
> acpi0 acd0: DVDR <MATSHITADVD-RAM UJ-822S/1.61> at ata1-master UDMA33

You didn't enable atapicam.

You can either kldload atapicam or add it to
your kernel configuration as "device atapicam".

Fabian
-- 
http://www.fabiankeil.de/
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20060408/e7add6b5/signature.pgp


More information about the freebsd-questions mailing list