kaeru at jaring.my
Tue Jan 25 21:16:54 PST 2005
On Sun, 2005-01-23 at 11:14 +0100, Dominique Goncalves wrote:
> I have a PSC 2175 and it's working perfectly with my FreeBSD 5.3
> I use the ports hpoj.
> But the printer/scanner must be detected as ugen device because libusb
> only use ugen device. To do this i have removed ultp and umass device
> from the kernel, after rebuild kernel I can see:
> ugen0: Hewlett-Packard PSC 2170 Series, rev 2.00/1.00, addr 3
> Now you can use hpoj ;)
Great!.. Thanks for the tip, removing ulpt was enough for me. For the
2110, I can print via hpoj, and sane detects and can communicate with
However I still have problems with scanning. I just get an I/O Error.
Debug shows it's communicating, and the printer status displays
scanning, but nothing comes through. When it cancels it also resets the
scanner which shows it's communicating ok.
Some errors are also showing for me in mpt soon after ptal starting up,
which may be the problem although it doesn't affect printing. I'll
follow it up on the mailing list.
It's good to hear that it's working ok with your PSC 2170.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Size: 187 bytes
Desc: This is a digitally signed message part
Url : http://lists.freebsd.org/pipermail/freebsd-questions/attachments/20050126/a5f3c274/attachment.bin
More information about the freebsd-questions