Will a SD card reader solve this problem?

[Ada Cheng]

Just to close this thread, the SD card reader worked beautifully.  I 
bought a Lexar JumpDrive Trio which cost less than US$20.

Ada

  On Thu, 11 Nov 2004, Greg 'groggy' Lehey wrote:

> On Wednesday, 10 November 2004 at  8:58:27 -0500, Ada Cheng wrote:
>> Good morning,
>>         I am trying to connect my Minolta Z2 camera with my box, currently
>> running 4.10 stable.
>>
>> ...
>>
>> After rebuilding the kernel and rebooting, I tested the configuration by
>> plugging in my camera. The following is the output of dmesg:
>> umass0: KONICA_MINOLTA DiMAGE Z2, rev 2.00/1.00, addr 2
>> umass0: BBB reset failed, TIMEOUT (this is repeated if I don't unplug the
>> camera)
>
> Hmm.  Not good.
>
>> If I do a camcontrol devlist I obtain
>> <KMCA DiMAGE Z2 1.00>              at scbus1 target 0 lun 0 (probe0)
>>
>> so I guess the camera is recognized but no device node was probed.
>>
>> I am also getting the following error when i do
>> $mount -t msdos -r /dev/da0s1c /camera
>> msdos: /dev/da0s1c: Device not configured
>> which I guess isn't too surprising.
>>
>> I have read various threads regarding this TIMEOUT failure error and
>> some has suggested doing some quirks with the src/sys/cam/scsi/scsi_da.c
>> file which I am not comfortable with doing.
>
> I'm in a similar (but not the same) situation with a Ricoh camera.  I
> can understand your position.
>
>> Will a SD card reader solve this problem?
>
> Almost certainly.  That's what I did.
>
> See http://www.lemis.com/grog/diary-nov2004.html#7 for more details.
>
> Greg
> --