problem with aue card
Alexey Koptsevich
kopts at astro.psu.edu
Fri Oct 17 21:47:01 PDT 2003
Indeed, after specifying 10Mbps media it works fine. Thanks!
Alex
On Fri, 10 Oct 2003, Andrew White wrote:
> Mine is on 10/100 network, and negotiates 100mb everytime, still
> functions ok, no issues at all (other than LEDS)
>
> Andrew
>
> -----Original Message-----
> From: owner-freebsd-questions at freebsd.org
> [mailto:owner-freebsd-questions at freebsd.org] On Behalf Of Scott Mitchell
> Sent: 09 October 2003 17:48
> To: Alexey Koptsevich
> Cc: questions at freebsd.org
> Subject: Re: problem with aue card
>
> On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote:
> >
> > Hi,
> >
> > I have a problem with the network card Linksys USB100TX. The hardware
> > itself is known to be working, but not under FreeBSD.
> >
> > Here is dmesg:
> >
> > Oct 8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter,
> rev 1.10/1.01, addr 2
> > Oct 8 21:10:40 pyosik kernel: aue0: Ethernet address:
> 00:e0:98:82:f3:e6
> > Oct 8 21:10:40 pyosik kernel: miibus1: <MII bus> on aue0
> > Oct 8 21:10:40 pyosik kernel: bmtphy0: <BCM5201 10/100baseTX PHY> on
> miibus1
> > Oct 8 21:10:40 pyosik kernel: bmtphy0: 10baseT, 10baseT-FDX,
> 100baseTX, 100baseTX-FDX, auto
> >
> > After loading if_ep the interface appears in the output of ifconfig,
> but
> > Oct 8 21:18:17 pyosik kernel: aue0: MII read timed out
> >
> > When I then try 'dhclient aue0', I get thousands of messages
> > aue0: usb error on rx: IOERROR
> >
> > Any piece of advice how to make this card work would be appreciated.
>
> Are you on a 100Mbps network? Our driver seems to have issues with this
> device on such networks, although it seems to work fine on 10Mbps
> connections.
>
> Scott
>
>
More information about the freebsd-questions
mailing list