problem with aue card

[Andrew White]

Mine is on 10/100 network, and negotiates 100mb everytime, still
functions ok, no issues at all (other than LEDS)

Andrew

-----Original Message-----
From: owner-freebsd-questions at freebsd.org
[mailto:owner-freebsd-questions at freebsd.org] On Behalf Of Scott Mitchell
Sent: 09 October 2003 17:48
To: Alexey Koptsevich
Cc: questions at freebsd.org
Subject: Re: problem with aue card

On Thu, Oct 09, 2003 at 03:23:15AM -0400, Alexey Koptsevich wrote:
> 
> Hi,
> 
> I have a problem with the network card Linksys USB100TX. The hardware
> itself is known to be working, but not under FreeBSD. 
> 
> Here is dmesg:
> 
> Oct  8 21:10:39 pyosik kernel: aue0: LINKSYS Inc. LINKSYS USB Adapter,
rev 1.10/1.01, addr 2
> Oct  8 21:10:40 pyosik kernel: aue0: Ethernet address:
00:e0:98:82:f3:e6
> Oct  8 21:10:40 pyosik kernel: miibus1: <MII bus> on aue0
> Oct  8 21:10:40 pyosik kernel: bmtphy0: <BCM5201 10/100baseTX PHY> on
miibus1
> Oct  8 21:10:40 pyosik kernel: bmtphy0:  10baseT, 10baseT-FDX,
100baseTX, 100baseTX-FDX, auto
> 
> After loading if_ep the interface appears in the output of ifconfig,
but
>  Oct  8 21:18:17 pyosik kernel: aue0: MII read timed out
> 
> When I then try 'dhclient aue0', I get thousands of messages
>  aue0: usb error on rx: IOERROR
> 
> Any piece of advice how to make this card work would be appreciated.

Are you on a 100Mbps network?  Our driver seems to have issues with this
device on such networks, although it seems to work fine on 10Mbps
connections.

	Scott

-- 
========================================================================
===
Scott Mitchell           | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England       | 0x54B171B9 |  don't get sucked into jet
engines"
scott at fishballoon.org | 0xAA775B8B |      -- Anon
_______________________________________________
freebsd-questions at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe at freebsd.org"