no route to host

[Ronald Weinrich]

this is the output (why does it show aktiv or up?)
on boot I run  
/sbin/ifconfig ep0 up
[ -x /sbin/ipnat ] && /sbin/ipnat -CF -f /etc/ipnat.conf && ipf -y && echo -n 'ipnat'
tia
ron

> In general, it means you need to post the output of
> 
> ifconfig -a
ed0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
	inet 213.47.28.166 netmask 0xfffffff0 broadcast 
213.47.28.175
	inet6 fe80::200:e8ff:fe68:c5b6%ed0 prefixlen 64 scopeid 0x1 
	ether 00:00:e8:68:c5:b6: 
flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500: 
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
	inet6 fe80::2c0:4fff:fed5:2c62%ep0 prefixlen 64 scopeid 0x3 
	inet 192.168.0.1 netmask 0xffffff00 broadcast 192.168.0.255
	ether 00:c0:4f:d5:2c:62
	media: Ethernet 10baseT/UTP: 
flags=8002<BROADCAST,MULTICAST> mtu 1500: 
flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 
	inet 127.0.0.1 netmask 0xff000000 : 
flags=8010<POINTOPOINT,MULTICAST> mtu 1500: 
flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552

> 
> and
> 
> netstat -rn
1/16/4928 mbufs in use (current/peak/max):
	1 mbufs allocated to data
/4/1232 mbuf clusters in use (current/peak/max)
Kbytes allocated to network (0% of mb_map in use)
requests for memory denied
requests for memory delayed
calls to protocol drain routines

> 
> and then tell us which IP address you were trying to ping.
> 
>