Qlogic Fibre Channel Host Adapter

Chad Stalvey cstalvey at hcsmail.com
Tue Jun 24 07:37:31 PDT 2003


I'm needing some help with a QLA2200 Fibre Channel Card on FreeBSD 4.2. I've
installed the card and the bios sees the raid 5 partition on our san. When
booting I see a warning message of:

isp0: <Qlogic ISP 2200 PCI FC-AL Adapter> port 0x3000-0x30ff mem
0xf4200000-0xf4200fff irq 5 at device 4.0 on pci2
isp0: WARNING- cannot determine Expanded LUN capability- limiting to one LUN

I'm trying to add the disk through /stand/sysinstall, but fdisk only sees
the one local attached drive.

I also added the line: ispfs_load="YES" to /boot/loader.conf  as I saw that
fixed someone else's similar "Lun" problem on another list.

I'm thinking I need some drivers for this card? Or am I way off? The only
drivers I see on Qlogic's site are that of Redhat, Solaris, and SCO. Are
there FreeBSD drivers available?

Has anyone else run into this problem?

Thanks in advance.

Chad Stalvey
Systems Engineer
Hayes E-Government Resources
850.297.0551 ext.136
Mobile 508.0485

More information about the freebsd-questions mailing list