vmware2 gives UNEXPECTED_KERNEL_MODE_TRAP
rick at kiwi-computer.com
rick at kiwi-computer.com
Mon Jun 16 16:15:17 PDT 2003
Back when I was using vmware2 on an Athlon 1.4 running 4.5-RELEASE, vmware2
worked great (albeit a little sluggish)! After recently purchasing an
Athlon XP 3000+, I opened my vmware archives and using the same
configuration I was unable to get vmware to run well. If I try to fresh
boot win2k as the Guest OS or if I try running the 2k install CD, I get the
following blue screen, immediately after the first Windows 2000
logo/graphic:
*** STOP: 0x0000007F (0x0000000D,0x00000000,0x00000000,0x00000000)
UNEXPECTED_KERNEL_MODE_TRAP
The error is consistant and I've tried a plethora of different
configuration settings. The only information I was able to find online was
at a Korean FreeBSD site; since I can't read Korean and AltaVista's
translator did a worthless job, that was a dead end. I ran MemTest v3.0
both natively and in the VM and had no troubles. I suspect the problem is
related to an XFree86 misconfiguration. Any suggestions at all are
appreciated. On a related note, I considered purchasing VMWare 4.0
Workstation but noticed there was no FreeBSD port; there are separate
maintainers for the 2.x & 3.x ports so I'm not sure who to contact; I would
be willing to help a maintainer get a vmware4 port working.
I have plenty of drive space:
# df -k
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/ad4s1a 253678 121860 111524 52% /
devfs 1 1 0 100% /dev
/dev/ad4s1d 253678 7396 225988 3% /tmp
/dev/ad4s1e 56168716 3145756 48529464 6% /usr
/dev/ad1s1 151368706 80024578 59234632 57% /aux
/dev/ad5s1d 56798124 21424768 30829508 41% /home
linprocfs 4 4 0 100% /usr/compat/linux/proc
No special hardware other than the very recent nVidia nForce2 board by ASUS
(A7N8X).. Portions of my XFree86 log (full log available if necessary)
included after the output from "dmesg -a":
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Thu Jun 5 02:55:42 GMT 2003
root at wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc073b000.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc073b244.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc073b2f0.
Preloaded elf module "/boot/kernel/if_xl.ko" at 0xc073b39c.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc073b448.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc073b4f4.
Preloaded elf module "/boot/kernel/ums.ko" at 0xc073b5a0.
Preloaded elf module "/boot/kernel/bktr.ko" at 0xc073b648.
Preloaded elf module "/boot/kernel/bktr_mem.ko" at 0xc073b6f4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc073b7a4.
module_register: module uhub/ums already exists!
Module uhub/ums failed to register: 17
module_register: module cardbus/xl already exists!
Module cardbus/xl failed to register: 17
module_register: module pci/xl already exists!
Module pci/xl failed to register: 17
module_register: module xl/miibus already exists!
Module xl/miibus failed to register: 17
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 2162740274 Hz
CPU: AMD Athlon(tm) XP 3000+ (2162.74-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CM
OV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400000<AMIE,DSP,3DNow!>
real memory = 1610547200 (1535 MB)
avail memory = 1558908928 (1486 MB)
bktr_mem: memory holder loaded
Pentium Pro MTRR support enabled
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc068cc02 (1000022)
VESA: Matrox Graphics Inc.
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdeb0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-fast" frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.1 (no driver attached)
pci0: <memory, RAM> at device 0.2 (no driver attached)
pci0: <memory, RAM> at device 0.3 (no driver attached)
pci0: <memory, RAM> at device 0.4 (no driver attached)
pci0: <memory, RAM> at device 0.5 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe6085000-0xe6085fff irq 10 at devic
e 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xe6080000-0xe6080fff at device 2.1 o
n pci0
pcib0: slot 2 INTB is routed to irq 10
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <network, ethernet> at device 4.0 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
pcm0: <Nvidia nForce2 AC97 controller> port 0xe000-0xe07f,0xec00-0xecff mem 0xe6
086000-0xe6086fff irq 11 at device 6.0 on pci0
pcm0: <Avance Logic ALC650 AC97 Codec>
pcib1: <ACPI PCI-PCI bridge> at device 8.0 on pci0
pci1: <ACPI PCI bus> on pcib1
bktr0: <BrookTree 878> mem 0xdd001000-0xdd001fff irq 3 at device 6.0 on pci1
bktr0: Hauppauge Model 38061 B226
bktr0: Hauppauge WinCast/TV, Philips NTSC tuner, remote control.
pci1: <multimedia> at device 6.1 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port 0xb000-0xb00f,0xac00-0xac03,0xa800-0
xa807,0xa400-0xa403,0xa000-0xa007 mem 0xe5000000-0xe50000ff irq 11 at device 7.0
on pci1
ata2: at 0xa000 on atapci0
ata3: at 0xa800 on atapci0
pci1: <display, VGA> at device 8.0 (no driver attached)
atapci1: <nVidia nForce2 UDMA133 controller> port 0xf000-0xf00f at device 9.0 on
pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
pcib2: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci2: <ACPI PCI bus> on pcib2
xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xdf000000-0xdf00007f irq 10 at device 1.0 on pci2
xl0: Ethernet address: 00:26:54:0c:a6:3b
miibus0: <MII bus> on xl0
acphy0: <AC101L 10/100 media interface> on miibus0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fwohci0: vendor=10de, dev=6e
fwohci0: <1394 Open Host Controller Interface> mem 0xe6084000-0xe608403f,0xe6083
000-0xe60837ff irq 12 at device 13.0 on pci0
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:e0:18:00:00:1c:2d:6a
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:1c:2d:6a
sbp0: <SBP2/SCSI over firewire> on firewire0
fwohci0: Initiate bus reset
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <display, VGA> at device 0.0 (no driver attached)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0
x3f5 irq 6 drq 2 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <Option ROMs> at iomem 0xcf000-0xcf7ff,0xc8000-0xc97ff,0xc0000-0xc7fff on
isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
ad1: 152627MB <SAMSUNG SV1604N> [310101/16/63] at ata0-slave UDMA133
ad4: 57278MB <SAMSUNG SV6004H> [116375/16/63] at ata2-master UDMA100
ad5: 57278MB <SAMSUNG SV6004H> [116375/16/63] at ata2-slave UDMA100
acd0: CD-RW <OPTORITE CD-RW CW4802> at ata1-master PIO4
acd1: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata1-slave PIO4
<snip>
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
ums0: at uhub1 port 2 (addr 2) disconnected
ums0: detached
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/11.10, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
linux: pid 8469 (vmware): ioctl fd=9, cmd=0x541c ('T',28) is not implemented
linux: pid 8469 (vmware): ioctl fd=9, cmd=0x541c ('T',28) is not implemented
WARNING: driver "vmmon" used unreserved major device number 200
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570
$
/dev/vmmon: Module vmmon: initialized
Jun 15 23:41:11 kayla kernel: /dev/vmmon: Module vmmon: registered with major=20
0 minor=0 tag=$Name: build-570 $
Jun 15 23:41:11 kayla kernel: /dev/vmmon: Module vmmon: initialized
/dev/vmmon: Vmx86_DestroyVM: unlocked pages: 3584, unlocked dirty pages: 2972
Jun 15 23:47:22 kayla kernel: /dev/vmmon: Vmx86_DestroyVM: unlocked pages: 3584,
unlocked dirty pages: 2972
XFree86 Version 4.3.0
Release Date: 27 February 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: FreeBSD 5.1 i386 [ELF]
Build Date: 24 May 2003
Before reporting problems, check http://www.XFree86.Org/
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun 15 02:22:22 2003
(==) Using config file: "/usr/X11R6/lib/X11/XF86Config"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Screen "Screen1" (1)
(**) | |-->Monitor "Monitor1"
(**) | |-->Device "Card1"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "dvorak"
(**) XKB: layout: "dvorak"
(**) Option "XkbOptions" "ctrl:nocaps"
(**) XKB: options: "ctrl:nocaps"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/Sp
eedo/,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6
/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) Using syscons driver with X support (version 2.0)
(--) using VT number 9
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on freebsd
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
<snip>
(--) PCI: (1:6:0) Brooktree Corporation Bt878 Video Capture rev 2, Mem @ 0xdd001
000/12
(--) PCI:*(1:8:0) Matrox Graphics, Inc. MGA 1064SG [Mystique] rev 3, Mem @ 0xdc0
00000/23, 0xe3000000/14, 0xe4000000/23
(--) PCI: (3:0:0) ATI Technologies Inc Radeon R100 QD [Radeon 7200] rev 0, Mem @
0xd0000000/27, 0xe1000000/19, I/O @ 0xd000/8
<snip>
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/freebsd/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "xtrap"
(II) Loading /usr/X11R6/lib/modules/extensions/libxtrap.a
(II) Module xtrap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DEC-XTRAP
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 6.4.18
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400,
mgag550
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
<snip>
(--) MGA(0): Chipset: "mga1064sg"
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(**) MGA(0): Option "ShadowFB" "false"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xDC000000
(--) MGA(0): MMIO registers at 0xE3000000
(--) MGA(0): Pseudo-DMA transfer window at 0xE4000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07C60
(--) MGA(0): Found and verified enhanced Video BIOS info block
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xe3000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xdc000000,0x800000)
(==) MGA(0): Write-combining range (0xe4000000,0x800000) was already clear
(--) MGA(0): VideoRAM: 4096 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.6
(==) MGA(0): Write-combining range (0xe3000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xdc000000,0x400000)
(==) MGA(0): Write-combining range (0xe4000000,0x800000) was already clear
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: 0x8795400
(II) MGA(0): Manufacturer: KDS Model: 19a0 Serial#: 18004021
(II) MGA(0): Year: 2000 Week: 18
(II) MGA(0): EDID Version: 1.1
(II) MGA(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) MGA(0): Sync: Separate Composite
(II) MGA(0): Max H-Image Size [cm]: horiz.: 35 vert.: 26
(II) MGA(0): Gamma: 3.10
(II) MGA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) MGA(0): redX: 0.625 redY: 0.342 greenX: 0.280 greenY: 0.595
(II) MGA(0): blueX: 0.155 blueY: 0.070 whiteX: 0.283 whiteY: 0.298
(II) MGA(0): Supported VESA Video Modes:
(II) MGA(0): 720x400 at 70Hz
(II) MGA(0): 640x480 at 60Hz
(II) MGA(0): 640x480 at 75Hz
(II) MGA(0): 800x600 at 75Hz
(II) MGA(0): 832x624 at 75Hz
(II) MGA(0): 1024x768 at 75Hz
(II) MGA(0): 1280x1024 at 75Hz
(II) MGA(0): Manufacturer's mask: 0
(II) MGA(0): Supported Future Video Modes:
(II) MGA(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) MGA(0): #1: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
(II) MGA(0): #2: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) MGA(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) MGA(0): #4: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) MGA(0): #5: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
(II) MGA(0): #6: hsize: 1600 vsize 1200 refresh: 85 vid: 22953
(II) MGA(0): #7: hsize: 1920 vsize 1440 refresh: 60 vid: 16593
(II) MGA(0): Monitor name: Avitron
(II) MGA(0): Monitor name: AV-195TF
(II) MGA(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 110 kHz, PixClo
ck max 300 MHz
(II) MGA(0): Serial No: BAA18004021
(II) MGA(0): end of I2C Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(--) MGA(0): Max pixel clock is 220 MHz
(WW) MGA(0): Monitor0: Using default hsync range of 30.00-110.00kHz
(WW) MGA(0): Monitor0: using default vrefresh range of 50.00-160.00Hz
(II) MGA(0): Clock range: 12.00 to 220.00 MHz
<snip>
(==) MGA(0): Write-combining range (0xe3000000,0x4000) was already clear
(==) MGA(0): Write-combining range (0xdc000000,0x400000)
(==) MGA(0): Write-combining range (0xe4000000,0x800000) was already clear
(II) MGA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) MGA(0): Write-combining range (0xa0000,0x10000) was already clear
(--) MGA(0): 32 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(EE) MGA(0): Static buffer allocation failed, not initializing the DRI
(EE) MGA(0): Need at least 11250 kB video memory at this resolution, bit depth
(II) MGA(0): Using 110 lines for offscreen memory.
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
13 64x110 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(**) Option "dpms"
(**) MGA(0): DPMS enabled
(--) MGA(0): Direct rendering disabled
<snip>
(II) Entity 0 shares no resources
(II) Entity 1 shares no resources
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/sysmouse"
(**) Option "Buttons" "5"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 5
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse
<snip>
I'm just using the Matrox card for my primary display so I tried to snip
out the rest of the junk... Sorry for the long message,
-- Rick C. Petty Senior Software Engineer, KIWI Computer
---------------------------------------------------------------
rick at kiwi-computer.com http://www.kiwi-computer.com/
More information about the freebsd-questions
mailing list