FreeBSD 4 on Proliant with RAID 1.

[Aram Gabrielyan]

   WTB:
   ProLiant DL320G3 SATA Rack [374295-405]
   Intel P4 processor [385652-L21]
   4GB RAM [354563-B21]
   2x 500GB SATA disks [395473-B21]  (will consider 300GB-500GB SCSI if
   there is no other choice)
   Can anybody confirm thatFreeBSD/i386 4.10-RELEASE will recognize the
   RAID 1 and Hard Drives?
   Here is the official list of supported hardware on our FreeBSD
   release: [1]http://www.freebsd.org/releases/4.10R/hardware-i386.html
   At this point it is so urgent that I do not care about RAID 1 any
   more. I just need the most powerful server that will be compatible
   with FreeBSD 4. Bellow is the link to a quick guide for software
   install and test page.
   [2]http://www.switzernet.com/public/080404-freebsd4-quick-install/
   here are the minimum requirements:
   1. 2x 300GB Hard Drive (500GB SATA desired but not required, can take
   SCSI)
   2. 4GB memory (additional 2GB desired but not required)
   3. RAID 1 (very desired but not required)
   4. rack mount kit must be included
    these 2 configurations are what we think might work, but i don't
   care, I can take anything else.
   ProLiant DL320G3 SATA Rack [374295-405]
   Intel P4 processor [385652-L21]
   4GB RAM [354563-B21]
   2x 500GB S disks [395473-B21]
   Dell:
   PowerEdge 750
   Intel P4 processor
   4GB DDR,400MHZ,PowerEdge 7X0
   PERC4-SC, 64MB, 1 Internal Channel (U320)*
   *2x 300GB SCSI U320

References

   1. http://www.freebsd.org/releases/4.10R/hardware-i386.html
   2. http://www.switzernet.com/public/080404-freebsd4-quick-install/