New port cad/fritzing

[Lars Engels]

On Wed, Nov 07, 2012 at 03:34:35PM -0200, Sergio de Almeida Lenzi wrote:
> Em Qua, 2012-11-07 às 21:37 +1000, Robert Backhaus escreveu:
> 
> > I had not problems building, but when I run, I get error messages:
> > 
> > Dialog: Sorry, we have a problem with the swapping mechanism. Fritzing
> > still works, but you won't be able to change parts properties
> > 
> > While "loading bin: core parts", a dialog that says "Unable to find
> > the following 112 parts", and a list starting with
> > '3234DBDC00PotnetionmetModuleId' at parts/core/basic_poti.fzp'
> > 
> > When closing that window (The 'OK' button is unavailable, because it
> > is way off the bottom of the screen), we get printed to the console: 
> > 7 times:
> > QPainter::begin: Paint device returned engine == 0, type: 2
> > QPainter::end: Painter not active, aborted
> > about 42 times:
> > libpng error: PNG file corrupted by ASCII conversion
> > 
> > The program then opens, but, as there are no parts, I can't do much.
> > 
> > 
> 
> Ok..  
> 
> I will build a system from ground zero (xorg, qt....) and will test 
> hope by tomorrow I will have a clue...

Sergio,

I updated your port to the latest version of Fritzing:

http://bsd-geek.de/FreeBSD/fritzing-0.8.7b.shar.xz

Unfortunately it's still showing the errors on startup and isn't usable.
Did you find out how to solve the problem?

Lars


-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 326 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20140216/d295d3c1/attachment.sig>