ntp-devel-4.2.7p364_2 coredumps

[Stefan Bethke]

Am 28.12.2013 um 06:13 schrieb Cy Schubert <Cy.Schubert at komquats.com>:

> In message <C06D904B-36FA-4C54-AD47-4CB737A34D22 at lassitu.de>, Stefan Bethke 
> wri
> tes:
>> 
>> --Apple-Mail=_6EEA81A7-5FCB-41CB-A6F5-4CBEDAB3BBAE
>> Content-Transfer-Encoding: quoted-printable
>> Content-Type: text/plain;
>> 	charset=us-ascii
>> 
>> On both 9-stable and 10-stable
>> 
>> Dec 26 13:02:04 lokschuppen ntpd[5270]: ntpd 4.2.7p364 at 1.2483-o Thu Dec =
>> 26 12:55:22 UTC 2013 (1): Starting
>> Dec 26 13:02:04 lokschuppen ntpd[5270]: Command line: =
>> /usr/local/sbin/ntpd -c /etc/ntp.conf -p /var/run/ntpd.pid -f =
>> /var/db/ntpd.drift
>> Dec 26 13:02:05 lokschuppen kernel: pid 5271 (ntpd), uid 0: exited on =
>> signal 11 (core dumped)
> 
> p404 has just been committed. Let's see if it makes a difference.
> 
> Let me know what uname -a shows and any options/optional modules compiled 
> or loaded.

That seems to have done the trick, thank you!

The problem occurred on both
FreeBSD diesel.lassitu.de 10.0-PRERELEASE FreeBSD 10.0-PRERELEASE #5 r259696: Sun Dec 22 00:13:23 CET 2013     root at diesel.lassitu.de:/usr/obj/var/freebsd/10-stable/sys/DIESEL  amd64
and
FreeBSD lokschuppen.zs64.net 9.2-PRERELEASE FreeBSD 9.2-PRERELEASE #2 r255602: Sun Sep 15 21:25:57 UTC 2013     root at lokschuppen.zs64.net:/usr/obj/freebsd/checkout/src/sys/EISENBOOT  amd64
with defaults for the port:
# make showconfig
===> The following configuration options are available for ntp-devel-4.2.7p404:
     ACTS=off: Enable ACTS modem service
     ARBITER=off: Enable Arbiter 1088A/B GPS receiver
     ARCRON_MSF=off: Enable Arcron MSF receiver
     AS2201=off: Enable Austron 2200A/2201A GPS receiver
     ATOM=on: Enable ATOM PPS interface
     AUDIO_CHU=off: Enable CHU audio/decoder
     BANCOMM=off: Enable Datum/Bancomm bc635/VME interface
     CHRONOLOG=off: Enable Chrono-log K-series WWVB receiver
     CHU=off: Enable CHU modem/decoder
     COMPUTIME=off: Enable Diem Computime Radio Clock
     DATUM=off: Enable Datum Programmable Time System
     DCF7000=off: Enable ELV/DCF7000 clock
     DUMBCLOCK=off: Enable Dumb generic hh:mm:ss local clock
     FG=off: Enable Forum Graphic GPS
     GPSVME=off: Enable TrueTime GPS receiver/VME interface
     HEATH=off: Enable Heath GC-1000 WWV/WWVH receiver
     HOPF6021=off: Enable HOPF 6021 clock
     HOPFPCI=off: Enable hopf 6039 PCI board
     HOPFSERIAL=off: Enable hopf serial clock device
     HPGPS=off: Enable HP 58503A GPS receiver
     IPV6=on: IPv6 protocol support
     IRIG=off: Enable IRIG audio decoder
     JJY=off: Enable JJY receiver
     JUPITER=off: Enable Rockwell Jupiter GPS receiver
     LEITCH=off: Enable Leitch CSD 5300 Master Clock
     LOCAL_CLOCK=off: Enable local clock reference
     MEINBERG=off: Enable Meinberg clocks
     MX4200=off: Enable Magnavox MX4200 GPS receiver
     NEOCLOCK4X=off: Enable NeoClock4X DCF77 / TDF receiver
     NMEA=on: Enable NMEA GPS receiver
     NTPSNMPD=off: Build and install ntpsnmpd
     NTP_SIGND=on: Enable signed NTP
     ONCORE=off: Enable Motorola VP/UT Oncore GPS receiver
     PALISADE=off: Enable Palisade clock
     PCF=off: Enable Conrad parallel port radio clock
     PST=off: Enable PST/Traconex 1020 WWV/WWVH receiver
     RAWDCF=off: Enable DCF77 raw time code
     RCC8000=off: Enable RCC 8000 clock
     RIPENCC=off: Enable RIPENCC specific Trimble driver
     SCHMID=off: Enable Schmid DCF77 clock
     SEL240X=off: Enable SEL 240X clocks
     SHM=off: Enable SHM clock attached thru shared memory
     SPECTRACOM=off: Enable Spectracom 8170/Netclock/2 WWVB
     SSL=on: SSL protocol support
     TRIMTAIP=off: Enable Trimble GPS receiver/TAIP protocol
     TRIMTSIP=off: Enable Trimble GPS receiver/TSIP protocol
     TRUETIME=off: Enable Kinemetrics/TrueTime receivers
     ULINK=off: Enable Ultralink WWVB receiver
     VARITEXT=off: Enable VARITEXT clock
     WHARTON=off: Enable WHARTON 400A Series clock
     WWV=off: Enable WWV Audio receiver
     ZYFER=off: Enable Zyfer GPStarplus receiver
===> Use 'make config' to modify these settings
-- 
Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811




-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 496 bytes
Desc: Message signed with OpenPGP using GPGMail
URL: <http://lists.freebsd.org/pipermail/freebsd-ports/attachments/20131228/ad56ee18/attachment.sig>