ntp-devel-4.2.7p364_2 coredumps

Cy Schubert Cy.Schubert at komquats.com
Sun Dec 29 04:21:24 UTC 2013


In message <5AD6315C-F8D5-477C-8E30-CAB70221E5F0 at lassitu.de>, Stefan Bethke 
wri
tes:
> 
> --Apple-Mail=_C732F0FB-B1AF-463B-AAFC-A6C2FA82A3B2
> Content-Transfer-Encoding: quoted-printable
> Content-Type: text/plain;
> 	charset=us-ascii
> 
> Am 28.12.2013 um 06:13 schrieb Cy Schubert <Cy.Schubert at komquats.com>:
> 
> > In message <C06D904B-36FA-4C54-AD47-4CB737A34D22 at lassitu.de>, Stefan =
> Bethke=20
> > wri
> > tes:
> >>=20
> >> --Apple-Mail=3D_6EEA81A7-5FCB-41CB-A6F5-4CBEDAB3BBAE
> >> Content-Transfer-Encoding: quoted-printable
> >> Content-Type: text/plain;
> >> 	charset=3Dus-ascii
> >>=20
> >> On both 9-stable and 10-stable
> >>=20
> >> Dec 26 13:02:04 lokschuppen ntpd[5270]: ntpd 4.2.7p364 at 1.2483-o Thu =
> Dec =3D
> >> 26 12:55:22 UTC 2013 (1): Starting
> >> Dec 26 13:02:04 lokschuppen ntpd[5270]: Command line: =3D
> >> /usr/local/sbin/ntpd -c /etc/ntp.conf -p /var/run/ntpd.pid -f =3D
> >> /var/db/ntpd.drift
> >> Dec 26 13:02:05 lokschuppen kernel: pid 5271 (ntpd), uid 0: exited on =
> =3D
> >> signal 11 (core dumped)
> >=20
> > p404 has just been committed. Let's see if it makes a difference.
> >=20
> > Let me know what uname -a shows and any options/optional modules =
> compiled=20
> > or loaded.
> 
> That seems to have done the trick, thank you!

Good stuff! You're welcome.
> 
> The problem occurred on both
> FreeBSD diesel.lassitu.de 10.0-PRERELEASE FreeBSD 10.0-PRERELEASE #5 =
> r259696: Sun Dec 22 00:13:23 CET 2013     =
> root at diesel.lassitu.de:/usr/obj/var/freebsd/10-stable/sys/DIESEL  amd64
> and
> FreeBSD lokschuppen.zs64.net 9.2-PRERELEASE FreeBSD 9.2-PRERELEASE #2 =
> r255602: Sun Sep 15 21:25:57 UTC 2013     =
> root at lokschuppen.zs64.net:/usr/obj/freebsd/checkout/src/sys/EISENBOOT  =
> amd64

I bet it was in the port.

You know, -devel ports are just that, development code. Everyone should be 
aware that -devel ports are not totally prod ready.


-- 
Cheers,
Cy Schubert <Cy.Schubert at komquats.com>
FreeBSD UNIX:  <cy at FreeBSD.org>   Web:  http://www.FreeBSD.org


> with defaults for the port:
> # make showconfig
> =3D=3D=3D> The following configuration options are available for =
> ntp-devel-4.2.7p404:
>      ACTS=3Doff: Enable ACTS modem service
>      ARBITER=3Doff: Enable Arbiter 1088A/B GPS receiver
>      ARCRON_MSF=3Doff: Enable Arcron MSF receiver
>      AS2201=3Doff: Enable Austron 2200A/2201A GPS receiver
>      ATOM=3Don: Enable ATOM PPS interface
>      AUDIO_CHU=3Doff: Enable CHU audio/decoder
>      BANCOMM=3Doff: Enable Datum/Bancomm bc635/VME interface
>      CHRONOLOG=3Doff: Enable Chrono-log K-series WWVB receiver
>      CHU=3Doff: Enable CHU modem/decoder
>      COMPUTIME=3Doff: Enable Diem Computime Radio Clock
>      DATUM=3Doff: Enable Datum Programmable Time System
>      DCF7000=3Doff: Enable ELV/DCF7000 clock
>      DUMBCLOCK=3Doff: Enable Dumb generic hh:mm:ss local clock
>      FG=3Doff: Enable Forum Graphic GPS
>      GPSVME=3Doff: Enable TrueTime GPS receiver/VME interface
>      HEATH=3Doff: Enable Heath GC-1000 WWV/WWVH receiver
>      HOPF6021=3Doff: Enable HOPF 6021 clock
>      HOPFPCI=3Doff: Enable hopf 6039 PCI board
>      HOPFSERIAL=3Doff: Enable hopf serial clock device
>      HPGPS=3Doff: Enable HP 58503A GPS receiver
>      IPV6=3Don: IPv6 protocol support
>      IRIG=3Doff: Enable IRIG audio decoder
>      JJY=3Doff: Enable JJY receiver
>      JUPITER=3Doff: Enable Rockwell Jupiter GPS receiver
>      LEITCH=3Doff: Enable Leitch CSD 5300 Master Clock
>      LOCAL_CLOCK=3Doff: Enable local clock reference
>      MEINBERG=3Doff: Enable Meinberg clocks
>      MX4200=3Doff: Enable Magnavox MX4200 GPS receiver
>      NEOCLOCK4X=3Doff: Enable NeoClock4X DCF77 / TDF receiver
>      NMEA=3Don: Enable NMEA GPS receiver
>      NTPSNMPD=3Doff: Build and install ntpsnmpd
>      NTP_SIGND=3Don: Enable signed NTP
>      ONCORE=3Doff: Enable Motorola VP/UT Oncore GPS receiver
>      PALISADE=3Doff: Enable Palisade clock
>      PCF=3Doff: Enable Conrad parallel port radio clock
>      PST=3Doff: Enable PST/Traconex 1020 WWV/WWVH receiver
>      RAWDCF=3Doff: Enable DCF77 raw time code
>      RCC8000=3Doff: Enable RCC 8000 clock
>      RIPENCC=3Doff: Enable RIPENCC specific Trimble driver
>      SCHMID=3Doff: Enable Schmid DCF77 clock
>      SEL240X=3Doff: Enable SEL 240X clocks
>      SHM=3Doff: Enable SHM clock attached thru shared memory
>      SPECTRACOM=3Doff: Enable Spectracom 8170/Netclock/2 WWVB
>      SSL=3Don: SSL protocol support
>      TRIMTAIP=3Doff: Enable Trimble GPS receiver/TAIP protocol
>      TRIMTSIP=3Doff: Enable Trimble GPS receiver/TSIP protocol
>      TRUETIME=3Doff: Enable Kinemetrics/TrueTime receivers
>      ULINK=3Doff: Enable Ultralink WWVB receiver
>      VARITEXT=3Doff: Enable VARITEXT clock
>      WHARTON=3Doff: Enable WHARTON 400A Series clock
>      WWV=3Doff: Enable WWV Audio receiver
>      ZYFER=3Doff: Enable Zyfer GPStarplus receiver
> =3D=3D=3D> Use 'make config' to modify these settings
> --=20
> Stefan Bethke <stb at lassitu.de>   Fon +49 151 14070811
> 
> 
> 
> 
> 
> --Apple-Mail=_C732F0FB-B1AF-463B-AAFC-A6C2FA82A3B2
> Content-Transfer-Encoding: 7bit
> Content-Disposition: attachment;
> 	filename=signature.asc
> Content-Type: application/pgp-signature;
> 	name=signature.asc
> Content-Description: Message signed with OpenPGP using GPGMail
> 
> -----BEGIN PGP SIGNATURE-----
> Comment: GPGTools - https://gpgtools.org
> 
> iQEcBAEBCgAGBQJSvqdCAAoJEA/POViuFuLBvOUH/A1ysLSPqMWiufEV2mfXMq/o
> KAlkjwWefqr9SmblNduYyigziqezrQy9W6hsVA1V+Irwcd1J8MWz+LAYAV7wPU4O
> pha2MB7epOvup8OE/HX7P4KuQZZM7v2sQHPy/4Uss833kg5NoA7PbVpZzHORINJv
> L2OePrBke93UzJjNMavlsl7MbCiPZptkIg6yIGtYcIbL21vymod3aK7T15+oMSJi
> Ckvz+UEVMS7RlwGORXGea5DMTR7Mvohi6Lgx/JmmFwn/Fgn7PKjz5nh5hnhlbB7y
> jtG3mOlX0TCmJsBXnNnWi17556emBU42fTtSCrVVTo+c/XfE7HB9yBeJJ/6U64M=
> =8spA
> -----END PGP SIGNATURE-----
> 
> --Apple-Mail=_C732F0FB-B1AF-463B-AAFC-A6C2FA82A3B2--
> 




More information about the freebsd-ports mailing list