HEADS UP: GNOME 2.16.1 has been committed
Jeremy Messenger
mezz7 at cox.net
Sat Oct 21 10:32:16 PDT 2006
On Sat, 21 Oct 2006 12:12:22 -0500, martinko <gamato at pobox.sk> wrote:
> martinko wrote:
>> mato wrote:
>>
>>> On Sun, 15 Oct 2006 20:42:41 -0400, Michael Johnson wrote
>>>
>>>
>>>> On 10/15/06, martinko <gamato at pobox.sk> wrote:
>>>>
>>>>
>>>>> Hello and thanks for your hard work!
>>>>>
>>>>> I've been using WITH_GECKO=seamonkey (and WITH_MOZILLA=seamonkey) and
>>>>> now when trying to install new Gnome (after uninstalling nearly
>>>>> everything) I've got the following error message from yelp
>>>>> installation:
>>>>>
>>>>> checking which gecko to use... seamonkey
>>>>> checking for compiler -fshort-wchar option... yes
>>>>> checking whether to enable C++ RTTI... no
>>>>> checking whether we have a gtk 2 gecko build... yes
>>>>> checking whether we have a gecko debug build... no
>>>>> checking for gecko version... 1.8
>>>>> configure: error: seamonkey is not supported
>>>>> ===> Script "configure" failed unexpectedly.
>>>>> Please run the gnomelogalyzer, available from
>>>>> "http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will
>>>>> diagnose the
>>>>> problem and suggest a solution. If - and only if - the
>>>>> gnomelogalyzer cannot
>>>>> solve the problem, report the build failure to the FreeBSD GNOME
>>>>> team at
>>>>> gnome at FreeBSD.org, and attach (a)
>>>>> "/usr/ports/x11/yelp/work/yelp-2.16.1/config.log", (b) the output of
>>>>> the
>>>>> failed make command, and (c) the gnomelogalyzer output. Also, it
>>>>> might be a
>>>>> good idea to provide an overview of all packages installed on your
>>>>> system
>>>>> (i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
>>>>> copy-and-paste into http://freebsd-gnome.pastebin.com, or use
>>>>> send-pr(1)
>>>>> with
>>>>> the attachment. Try to avoid sending any attachments to the mailing
>>>>> list
>>>>> (gnome at FreeBSD.org), because attachments sent to FreeBSD mailing
>>>>> lists are
>>>>> usually discarded by the mailing list software.
>>>>> *** Error code 1
>>>>>
>>>>> Stop in /usr/ports/x11/yelp.
>>>>> *** Error code 1
>>>>>
>>>>> Stop in /usr/ports/x11/yelp.
>>>>> *** Error code 1
>>>>>
>>>>> Stop in /usr/ports/x11/gnome2-lite.
>>>>> *** Error code 1
>>>>>
>>>>> Stop in /usr/ports/x11/gnome2-lite.
>>>>> ** Command failed [exit code 1]: /usr/bin/script -qa
>>>>> /tmp/portinstall.3919.0 env make reinstall
>>>>> ** Fix the installation problem and try again.
>>>>> ---> Installation of x11/gnome2-lite ended at: Mon, 16 Oct 2006
>>>>> 00:24:55 +0200 (consumed 00:04:15)
>>>>> ---> Fresh installation of x11/gnome2-lite ended at: Mon, 16 Oct
>>>>> 2006
>>>>> 00:24:55 +0200 (consumed 00:05:26)
>>>>> ---> ** Install tasks 1: 0 done, 0 ignored, 0 skipped and 1 failed
>>>>> [Updating the pkgdb <format:bdb_btree> in /var/db/pkg ... - 372
>>>>> packages
>>>>> found (-0 +1) . done]
>>>>> ---> Listing the results (+:done / -:ignored / *:skipped / !:failed)
>>>>> ! x11/gnome2-lite (install error)
>>>>> ---> Packages processed: 0 done, 0 ignored, 0 skipped and 1 failed
>>>>> ---> Session ended at: Mon, 16 Oct 2006 00:24:57 +0200 (consumed
>>>>> 00:06:22)
>>>>>
>>>>> I cannot see a reason why seamonkey wouldn't be supported (and it's
>>>>> listed in yelp/Makefile).
>>>>> Could you please check and fix this ?
>>>>>
>>>>>
>>>>>
>>>> I disabled seamonkey support for now. Seamonkey used to work in
>>>> yelp.
>>>>
>>>>
>>>>
>>> Hi,
>>>
>>> May I ask you to check whether it could possibly (be made to) work pls
>>> ?
>>> (for I don't feel like installing another browser only for yelp to
>>> work.
>>> actually i wouldn't have moved from old gnome if i had known this.)
>>>
>>> Many thanks!
>>>
>>> Martin
>>>
>>>
>>
>> Hello guys,
>>
>> Yet another issue discovered, now with epiphany:
>>
>> [...]
>>
>> epiphany is using seamonkey for gecko support, but you can
>> change that by defining WITH_GECKO to the following values:
>>
>> firefox
>> mozilla
>> seamonkey
>> firefox-devel
>> xulrunner
>>
>> [...]
>>
>> checking which gecko to use... seamonkey
>> checking for compiler -fshort-wchar option... yes
>> checking whether to enable C++ RTTI... no
>> checking whether we have a gtk 2 gecko build... yes
>> checking whether we have a gecko debug build... no
>> checking for gecko version... 1.8
>> configure: error: "mozilla" flavoured geckos aren't tasty enough!
>> ===> Script "configure" failed unexpectedly.
>> Please run the gnomelogalyzer, available from
>> "http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose
>> the
>> problem and suggest a solution. If - and only if - the gnomelogalyzer
>> cannot
>> solve the problem, report the build failure to the FreeBSD GNOME team at
>> gnome at FreeBSD.org, and attach (a)
>> "/usr/ports/www/epiphany/work/epiphany-2.16.1/config.log", (b) the
>> output of
>> the failed make command, and (c) the gnomelogalyzer output. Also, it
>> might
>> be a good idea to provide an overview of all packages installed on your
>> system
>> (i.e. an `ls /var/db/pkg`). Put your attachment up on any website,
>> copy-and-paste into http://freebsd-gnome.pastebin.com, or use send-pr(1)
>> with
>> the attachment. Try to avoid sending any attachments to the mailing list
>> (gnome at FreeBSD.org), because attachments sent to FreeBSD mailing lists
>> are
>> usually discarded by the mailing list software.
>> *** Error code 1
>>
>> Stop in /usr/ports/www/epiphany.
>> *** Error code 1
>>
>> Stop in /usr/ports/www/epiphany-extensions.
>> ** Command failed [exit code 1]: /usr/bin/script -qa
>> /tmp/portinstall.2355.0 env make
>> ** Fix the problem and try again.
>>
>>
>>
>
> Also, www/epiphany-extensions build fails for some reason:
>
> checking whether epiphany has python support... no
> checking for EPIPHANY_DEPENDENCY... yes
> checking whether OpenSP support is requested... no
> checking which extensions to build... configure: WARNING: Epiphany
> compiled without python support, extensions python-console sample-python
> favicon will not be available
> actions auto-reload auto-scroller certificates error-viewer
> extensions-manager-ui gestures java-console page-info push-scroller
> select-stylesheet sidebar smart-bookmarks tab-groups tab-states adblock
> checking for pcre-config... /usr/local/bin/pcre-config
> checking whether libpcre was compiled with UTF-8 support... no
> configure: error: pcre does not support utf-8
You need to uninstall pcre and install devel/pcre-utf8. It required to
have with utf8 support.
Cheers,
Mezz
> ===> Script "configure" failed unexpectedly.
> Please run the gnomelogalyzer, available from
> "http://www.freebsd.org/gnome/gnomelogalyzer.sh", which will diagnose the
> problem and suggest a solution. If - and only if - the gnomelogalyzer
> cannot
> solve the problem, report the build failure to the FreeBSD GNOME team at
> gnome at FreeBSD.org, and attach (a)
> "/usr/ports/www/epiphany-extensions/work/epiphany-extensions-2.16.1/config.log",
> (b) the output of the failed make command, and (c) the gnomelogalyzer
> output.
> Also, it might be a good idea to provide an overview of all packages
> installed
> on your system (i.e. an `ls /var/db/pkg`). Put your attachment up on any
> website, copy-and-paste into http://freebsd-gnome.pastebin.com, or use
> send-pr(1) with the attachment. Try to avoid sending any attachments to
> the
> mailing list (gnome at FreeBSD.org), because attachments sent to FreeBSD
> mailing
> lists are usually discarded by the mailing list software.
> *** Error code 1
>
> Stop in /usr/ports/www/epiphany-extensions.
> ** Command failed [exit code 1]: /usr/bin/script -qa
> /tmp/portinstall.15536.0 env make
> ** Fix the problem and try again.
--
mezz7 at cox.net - mezz at FreeBSD.org
FreeBSD GNOME Team - FreeBSD Multimedia Hat (ports, not src)
http://www.FreeBSD.org/gnome/ - gnome at FreeBSD.org
http://wiki.freebsd.org/multimedia - multimedia at FreeBSD.org
More information about the freebsd-ports
mailing list